From: Alistair Buxton Date: Tue, 22 Sep 2009 06:34:13 +0000 (+0100) Subject: OMAP7XX: Update core omap1 files to use omap7xx.h X-Git-Tag: v2.6.33-rc1~381^2~69^2~2^2~21^2~6 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b51988db94faec47d6e7c69c8e691cfc194f66db;p=karo-tx-linux.git OMAP7XX: Update core omap1 files to use omap7xx.h This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index a7ead1b93226..e53f7748ac13 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -309,7 +309,7 @@ static void __init omap_fsample_map_io(void) /* * Hold GSM Reset until needed */ - omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver @@ -320,21 +320,21 @@ static void __init omap_fsample_map_io(void) */ /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); - omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); - omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ - omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 83406699f310..ec22838e8e79 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -270,7 +270,7 @@ static void __init omap_perseus2_map_io(void) /* * Hold GSM Reset until needed */ - omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver @@ -281,21 +281,21 @@ static void __init omap_perseus2_map_io(void) */ /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); - omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); - omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ - omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index fcbea61cb8ca..c24cc28238f9 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -862,7 +862,7 @@ int __init omap1_clk_init(void) #if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); + omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); #endif /* Amstrad Delta wants BCLK high when inactive */ diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 19de57f74e84..157d5082ffea 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -39,14 +39,14 @@ static struct map_desc omap_io_desc[] __initdata = { #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) static struct map_desc omap730_io_desc[] __initdata = { { - .virtual = OMAP730_DSP_BASE, - .pfn = __phys_to_pfn(OMAP730_DSP_START), - .length = OMAP730_DSP_SIZE, + .virtual = OMAP7XX_DSP_BASE, + .pfn = __phys_to_pfn(OMAP7XX_DSP_START), + .length = OMAP7XX_DSP_SIZE, .type = MT_DEVICE }, { - .virtual = OMAP730_DSPREG_BASE, - .pfn = __phys_to_pfn(OMAP730_DSPREG_START), - .length = OMAP730_DSPREG_SIZE, + .virtual = OMAP7XX_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP7XX_DSPREG_START), + .length = OMAP7XX_DSPREG_SIZE, .type = MT_DEVICE } }; diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index 26c1fbff08aa..99c42412c0a1 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -280,7 +280,7 @@ * --------------------------------------------------------------------------- */ -#include "omap730.h" +#include "omap7xx.h" #include "omap1510.h" #include "omap16xx.h" #include "omap24xx.h" diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 587fb63d2323..66ae302f0c0f 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -51,13 +51,13 @@ .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, -#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \ - .mux_reg = OMAP730_IO_CONF_##reg, \ +#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \ - .pull_reg = OMAP730_IO_CONF_##reg, \ +#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ + .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -75,11 +75,11 @@ .pu_pd_val = status, #define MUX_REG_730(reg, mode_offset, mode) \ - .mux_reg = OMAP730_IO_CONF_##reg, \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \ +#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -99,7 +99,7 @@ /* * OMAP730/850 has a slightly different config for the pin mux. - * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and + * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and * not the FUNC_MUX_CTRL_x regs from hardware.h * - for pull-up/down, only has one enable bit which is is in the same register * as mux config diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index 388fd9490939..23a205f4a2b1 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -13,7 +13,7 @@ #include #include -#include +#include #include #include #include @@ -34,12 +34,12 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT); } if (cpu_is_omap7xx()) { - if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE)) - return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START); + if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE)) + return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START); - if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE)) - return XLATE(p, OMAP730_DSPREG_BASE, - OMAP730_DSPREG_START); + if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE)) + return XLATE(p, OMAP7XX_DSPREG_BASE, + OMAP7XX_DSPREG_START); } if (cpu_is_omap15xx()) { if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))