From: Hans de Goede Date: Sat, 20 Jun 2015 15:40:07 +0000 (+0200) Subject: ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes X-Git-Tag: v4.3-rc1~120^2~24^2~14 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b5977f389d9ec7b5ffdc37ca6f2266e05295a552;p=karo-tx-linux.git ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes u-boot will have turned on the power to the usb host ports, so mark them as regulator-boot-on, this stops the power on the ports from temporarily getting turned off during boot, causing issues with e.g. usb powered harddisks. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index 51cc8383f70f..f1953b0c5059 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -108,6 +108,7 @@ regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; enable-active-high; gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; status = "disabled"; @@ -120,6 +121,7 @@ regulator-name = "usb2-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; enable-active-high; gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>; status = "disabled";