From: Holger Brunck <[holger.brunck@keymile.com]> Date: Thu, 16 Jun 2011 12:41:15 +0000 (+0530) Subject: arm/km: fix u-boot.kwb build breakage X-Git-Tag: v2011.09-rc1~266 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b5befd8211b54ae2d2fca3fbed061c879951ceaa;p=karo-tx-uboot.git arm/km: fix u-boot.kwb build breakage commit 010a958b (arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h) breaks building keymile arm targets, when u-boot.kwb tries to generate the binary with mkimage. A simple make or MAKEALL succeeded because it don't try to build the kirwood binary at the end. Due this commit we use the CONFIG_SYS_KWD_CONFIG from the arch-kirkwood/config.h and it was removed from the board config. But it was forgotten to include the header. Now the header is included in km_arm.h. Some other defines were obsolete due to this include, these are also removed in this commit. Signed-off-by: Holger Brunck cc: Valentin Longchamp cc: Prafulla Wadaskar cc: Heiko Schocher --- diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index 20ee6eab85..4741278606 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -40,7 +40,6 @@ * High Level Configuration Options (easy to change) */ #define CONFIG_MARVELL -#define CONFIG_ARM926EJS /* Basic Architecture */ #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ #define CONFIG_KIRKWOOD /* SOC Family Name */ #define CONFIG_KW88F6281 /* SOC Name */ @@ -49,6 +48,12 @@ /* include common defines/options for all Keymile boards */ #include "keymile-common.h" +#define CONFIG_CMD_NAND +#define CONFIG_CMD_SF +#define CONFIG_SOFT_I2C /* I2C bit-banged */ + +#include "asm/arch/config.h" + #define CONFIG_SYS_TEXT_BASE 0x04000000 /* code address after reloc */ #define CONFIG_ENV_SIZE (128 << 10) /* NAND chip block size */ #define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ @@ -75,12 +80,7 @@ #define CONFIG_KM_ARCH_DBG_FILE "scripts/debug-arm-env.txt" -#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ -#undef CONFIG_KIRKWOOD_PCIE_INIT /* Disable PCIE Port0 for kernel */ -#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ - #define CONFIG_MISC_INIT_R /* @@ -116,7 +116,6 @@ */ #define CONFIG_CMD_ELF #define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NAND #define CONFIG_CMD_NFS /* @@ -131,8 +130,6 @@ */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 -#define CONFIG_NAND_KIRKWOOD -#define CONFIG_SYS_NAND_BASE 0xd8000000 #define BOOTFLASH_START 0x0 @@ -175,8 +172,6 @@ /* * I2C related stuff */ -#define CONFIG_SOFT_I2C /* I2C bit-banged */ - #define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */ #if defined(CONFIG_SOFT_I2C) #ifndef __ASSEMBLY__ @@ -200,8 +195,6 @@ int get_scl(void); #define I2C_DELAY udelay(3) /* 1/4 I2C clock duration */ #define I2C_SOFT_DECLARATIONS -#define CONFIG_SYS_I2C_SLAVE 0x0 -#define CONFIG_SYS_I2C_SPEED 100000 #endif #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 @@ -224,15 +217,8 @@ int get_scl(void); #define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */ #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#define CONFIG_CMD_SF - #define CONFIG_SPI_FLASH -#define CONFIG_HARD_SPI -#define CONFIG_KIRKWOOD_SPI #define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50Mhz */ #define FLASH_GPIO_PIN 0x00010000 @@ -272,8 +258,6 @@ int get_scl(void); /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -/* Kirkwood has 2k of Security SRAM, use it for SP */ -#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 /* Do early setups now in board_init_f() */ #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/mgcoge3un.h b/include/configs/mgcoge3un.h index 6d56d7d087..8d1b61f731 100644 --- a/include/configs/mgcoge3un.h +++ b/include/configs/mgcoge3un.h @@ -48,6 +48,7 @@ #define KM_ENV_BUS "pca9547:70:d" /* I2C2 (Mux-Port 5)*/ /* we use a new RAM type on mgcoge3un board */ +#undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg /*