From: Ed Spiridonov Date: Mon, 20 Jun 2016 18:40:15 +0000 (+0300) Subject: can: mcp251x: add message about sucessful/unsuccessful probe X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b63f69d0fc1fa1e25842a2266633862d523c380f;p=linux-beck.git can: mcp251x: add message about sucessful/unsuccessful probe Silent ignorance of errors during probe procedure is a bad thing, this patch fixes it. Extra message added for hardware initialization failure. Such common issues are mostly caused by wrong wiring. Message about success added as well, it should be useful to debug new hardware configuration, especially in case of several CAN buses. Signed-off-by: Ed Spiridonov Signed-off-by: Marc Kleine-Budde --- diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c index cf36d26ef002..f3f05fea8e1f 100644 --- a/drivers/net/can/spi/mcp251x.c +++ b/drivers/net/can/spi/mcp251x.c @@ -1145,8 +1145,11 @@ static int mcp251x_can_probe(struct spi_device *spi) /* Here is OK to not lock the MCP, no one knows about it yet */ ret = mcp251x_hw_probe(spi); - if (ret) + if (ret) { + if (ret == -ENODEV) + dev_err(&spi->dev, "Cannot initialize MCP%x. Wrong wiring?\n", priv->model); goto error_probe; + } mcp251x_hw_sleep(spi); @@ -1156,6 +1159,7 @@ static int mcp251x_can_probe(struct spi_device *spi) devm_can_led_init(net); + netdev_info(net, "MCP%x successfully initialized.\n", priv->model); return 0; error_probe: @@ -1168,6 +1172,7 @@ out_clk: out_free: free_candev(net); + dev_err(&spi->dev, "Probe failed, err=%d\n", -ret); return ret; }