From: H Hartley Sweeten Date: Thu, 14 Apr 2016 16:57:56 +0000 (-0700) Subject: staging: comedi: ni_mio_common: fix lines over 80 characters X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b6a0e5b32a206507b21474ad04a4854fbbda2e69;p=linux-beck.git staging: comedi: ni_mio_common: fix lines over 80 characters Fix the checkpatch.pl issues. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c index dce8a864eef6..fa2aad4b3ec8 100644 --- a/drivers/staging/comedi/drivers/ni_mio_common.c +++ b/drivers/staging/comedi/drivers/ni_mio_common.c @@ -877,16 +877,17 @@ static inline unsigned short ni_ao_win_inw(struct comedi_device *dev, int addr) return data; } -/* ni_set_bits( ) allows different parts of the ni_mio_common driver to -* share registers (such as Interrupt_A_Register) without interfering with -* each other. -* -* NOTE: the switch/case statements are optimized out for a constant argument -* so this is actually quite fast--- If you must wrap another function around this -* make it inline to avoid a large speed penalty. -* -* value should only be 1 or 0. -*/ +/* + * ni_set_bits( ) allows different parts of the ni_mio_common driver to + * share registers (such as Interrupt_A_Register) without interfering with + * each other. + * + * NOTE: the switch/case statements are optimized out for a constant argument + * so this is actually quite fast--- If you must wrap another function around + * this make it inline to avoid a large speed penalty. + * + * value should only be 1 or 0. + */ static inline void ni_set_bits(struct comedi_device *dev, int reg, unsigned int bits, unsigned int value) { @@ -1102,7 +1103,10 @@ static void ni_ai_fifo_read(struct comedi_device *dev, comedi_buf_write_samples(s, &data, 1); } } else if (devpriv->is_6143) { - /* This just reads the FIFO assuming the data is present, no checks on the FIFO status are performed */ + /* + * This just reads the FIFO assuming the data is present, + * no checks on the FIFO status are performed. + */ for (i = 0; i < n / 2; i++) { dl = ni_readl(dev, NI6143_AI_FIFO_DATA_REG); @@ -1153,7 +1157,6 @@ static void ni_handle_fifo_dregs(struct comedi_device *dev) struct comedi_subdevice *s = dev->read_subdev; unsigned int dl; unsigned short data; - unsigned short fifo_empty; int i; if (devpriv->is_611x) { @@ -1189,15 +1192,16 @@ static void ni_handle_fifo_dregs(struct comedi_device *dev) } } else { - fifo_empty = ni_stc_readw(dev, NISTC_AI_STATUS1_REG) & - NISTC_AI_STATUS1_FIFO_E; - while (fifo_empty == 0) { + unsigned short fe; /* fifo empty */ + + fe = ni_stc_readw(dev, NISTC_AI_STATUS1_REG) & + NISTC_AI_STATUS1_FIFO_E; + while (fe == 0) { for (i = 0; i < ARRAY_SIZE(devpriv->ai_fifo_buffer); i++) { - fifo_empty = ni_stc_readw(dev, - NISTC_AI_STATUS1_REG) & - NISTC_AI_STATUS1_FIFO_E; - if (fifo_empty) + fe = ni_stc_readw(dev, NISTC_AI_STATUS1_REG) & + NISTC_AI_STATUS1_FIFO_E; + if (fe) break; devpriv->ai_fifo_buffer[i] = ni_readw(dev, NI_E_AI_FIFO_DATA_REG); @@ -1323,7 +1327,10 @@ static void handle_a_interrupt(struct comedi_device *dev, unsigned short status, struct comedi_subdevice *s = dev->read_subdev; struct comedi_cmd *cmd = &s->async->cmd; - /* 67xx boards don't have ai subdevice, but their gpct0 might generate an a interrupt */ + /* + * 67xx boards don't have ai subdevice, but their gpct0 might + * generate an a interrupt. + */ if (s->type == COMEDI_SUBD_UNUSED) return; @@ -1826,7 +1833,8 @@ static void ni_load_channelgain_list(struct comedi_device *dev, ni_writew(dev, devpriv->ai_calib_source, NI6143_CALIB_CHAN_REG); devpriv->ai_calib_source_enabled = 1; - msleep_interruptible(100); /* Allow relays to change */ + /* Allow relays to change */ + msleep_interruptible(100); } else if (!(list[0] & CR_ALT_SOURCE) && devpriv->ai_calib_source_enabled) { /* Strobe Relay disable bit */ @@ -1836,7 +1844,8 @@ static void ni_load_channelgain_list(struct comedi_device *dev, ni_writew(dev, devpriv->ai_calib_source, NI6143_CALIB_CHAN_REG); devpriv->ai_calib_source_enabled = 0; - msleep_interruptible(100); /* Allow relays to change */ + /* Allow relays to change */ + msleep_interruptible(100); } } @@ -1957,7 +1966,11 @@ static int ni_ai_insn_read(struct comedi_device *dev, ni_stc_writew(dev, NISTC_AI_CMD1_CONVERT_PULSE, NISTC_AI_CMD1_REG); - /* The 6143 has 32-bit FIFOs. You need to strobe a bit to move a single 16bit stranded sample into the FIFO */ + /* + * The 6143 has 32-bit FIFOs. You need to strobe a + * bit to move a single 16bit stranded sample into + * the FIFO. + */ dl = 0; for (i = 0; i < NI_TIMEOUT; i++) { if (ni_readl(dev, NI6143_AI_FIFO_STATUS_REG) & @@ -1995,7 +2008,8 @@ static int ni_ai_insn_read(struct comedi_device *dev, data[n] = dl; } else { d = ni_readw(dev, NI_E_AI_FIFO_DATA_REG); - d += signbits; /* subtle: needs to be short addition */ + /* subtle: needs to be short addition */ + d += signbits; data[n] = d; } } @@ -2331,7 +2345,10 @@ static int ni_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) if (stop_count == 0) { devpriv->ai_cmd2 |= NISTC_AI_CMD2_END_ON_EOS; interrupt_a_enable |= NISTC_INTA_ENA_AI_STOP; - /* this is required to get the last sample for chanlist_len > 1, not sure why */ + /* + * This is required to get the last sample for + * chanlist_len > 1, not sure why. + */ if (cmd->chanlist_len > 1) start_stop_select |= NISTC_AI_STOP_POLARITY | NISTC_AI_STOP_EDGE; @@ -2451,7 +2468,7 @@ static int ni_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) switch (devpriv->aimode) { case AIMODE_HALF_FULL: - /*generate FIFO interrupts and DMA requests on half-full */ + /* FIFO interrupts and DMA requests on half-full */ #ifdef PCIDMA ni_stc_writew(dev, NISTC_AI_MODE3_FIFO_MODE_HF_E, NISTC_AI_MODE3_REG); @@ -4905,7 +4922,10 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device *dev, if (source == NI_MIO_PLL_PXI10_CLOCK) period_ns = 100; - /* these limits are somewhat arbitrary, but NI advertises 1 to 20MHz range so we'll use that */ + /* + * These limits are somewhat arbitrary, but NI advertises 1 to 20MHz + * range so we'll use that. + */ if (period_ns < min_period_ns || period_ns > max_period_ns) { dev_err(dev->class_dev, "%s: you must specify an input clock frequency between %i and %i nanosec for the phased-lock loop\n", @@ -4955,7 +4975,7 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device *dev, ni_writew(dev, pll_control_bits, NI_M_PLL_CTRL_REG); devpriv->clock_source = source; - /* it seems to typically take a few hundred microseconds for PLL to lock */ + /* it takes a few hundred microseconds for PLL to lock */ for (i = 0; i < timeout; ++i) { if (ni_readw(dev, NI_M_PLL_STATUS_REG) & NI_M_PLL_STATUS_LOCKED) break; @@ -5247,7 +5267,7 @@ static irqreturn_t ni_E_interrupt(int irq, void *d) if (!dev->attached) return IRQ_NONE; - smp_mb(); /* make sure dev->attached is checked before handler does anything else. */ + smp_mb(); /* make sure dev->attached is checked */ /* lock to avoid race with comedi_poll */ spin_lock_irqsave(&dev->spinlock, flags);