From: David Kershner Date: Fri, 2 Sep 2016 20:41:39 +0000 (-0400) Subject: staging: unisys: visorbus: merge vbusdeviceinfo.h into vbuschannel X-Git-Tag: v4.9-rc1~119^2~635 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b6d0fa15e851cc8779a5e7676f2b52a33baba8ba;p=karo-tx-linux.git staging: unisys: visorbus: merge vbusdeviceinfo.h into vbuschannel vbusdeviceinfo.h was only used by vbuschannel.h so merge them together. Signed-off-by: David Kershner Reviewed-by: Tim Sell Reported-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/unisys/visorbus/vbuschannel.h b/drivers/staging/unisys/visorbus/vbuschannel.h index 90fa12e62f26..3f7830bbd22e 100644 --- a/drivers/staging/unisys/visorbus/vbuschannel.h +++ b/drivers/staging/unisys/visorbus/vbuschannel.h @@ -23,7 +23,6 @@ * the client devices and client drivers for the server end to see. */ #include -#include "vbusdeviceinfo.h" #include "channel.h" /* {193b331b-c58f-11da-95a9-00e08161165f} */ @@ -58,6 +57,217 @@ static const uuid_le spar_vbus_channel_protocol_uuid = actual_bytes)) #pragma pack(push, 1) /* both GCC and VC now allow this pragma */ + +/* + * An array of this struct is present in the channel area for each vbus. + * (See vbuschannel.h.) + * It is filled in by the client side to provide info about the device + * and driver from the client's perspective. + */ +struct ultra_vbus_deviceinfo { + u8 devtype[16]; /* short string identifying the device type */ + u8 drvname[16]; /* driver .sys file name */ + u8 infostrs[96]; /* sequence of tab-delimited id strings: */ + /* */ + u8 reserved[128]; /* pad size to 256 bytes */ +}; + +/** + * vbuschannel_sanitize_buffer() - remove non-printable chars from buffer + * @p: destination buffer where chars are written to + * @remain: number of bytes that can be written starting at #p + * @src: pointer to source buffer + * @srcmax: number of valid characters at #src + * + * Reads chars from the buffer at @src for @srcmax bytes, and writes to + * the buffer at @p, which is @remain bytes long, ensuring never to + * overflow the buffer at @p, using the following rules: + * - printable characters are simply copied from the buffer at @src to the + * buffer at @p + * - intervening streaks of non-printable characters in the buffer at @src + * are replaced with a single space in the buffer at @p + * Note that we pay no attention to '\0'-termination. + * + * Pass @p == NULL and @remain == 0 for this special behavior -- In this + * case, we simply return the number of bytes that WOULD HAVE been written + * to a buffer at @p, had it been infinitely big. + * + * Return: the number of bytes written to @p (or WOULD HAVE been written to + * @p, as described in the previous paragraph) + */ +static inline int +vbuschannel_sanitize_buffer(char *p, int remain, char *src, int srcmax) +{ + int chars = 0; + int nonprintable_streak = 0; + + while (srcmax > 0) { + if ((*src >= ' ') && (*src < 0x7f)) { + if (nonprintable_streak) { + if (remain > 0) { + *p = ' '; + p++; + remain--; + chars++; + } else if (!p) { + chars++; + } + nonprintable_streak = 0; + } + if (remain > 0) { + *p = *src; + p++; + remain--; + chars++; + } else if (!p) { + chars++; + } + } else { + nonprintable_streak = 1; + } + src++; + srcmax--; + } + return chars; +} + +#define VBUSCHANNEL_ADDACHAR(ch, p, remain, chars) \ + do { \ + if (remain <= 0) \ + break; \ + *p = ch; \ + p++; chars++; remain--; \ + } while (0) + +/** + * vbuschannel_itoa() - convert non-negative int to string + * @p: destination string + * @remain: max number of bytes that can be written to @p + * @num: input int to convert + * + * Converts the non-negative value at @num to an ascii decimal string + * at @p, writing at most @remain bytes. Note there is NO '\0' termination + * written to @p. + * + * Return: number of bytes written to @p + * + */ +static inline int +vbuschannel_itoa(char *p, int remain, int num) +{ + int digits = 0; + char s[32]; + int i; + + if (num == 0) { + /* '0' is a special case */ + if (remain <= 0) + return 0; + *p = '0'; + return 1; + } + /* form a backwards decimal ascii string in */ + while (num > 0) { + if (digits >= (int)sizeof(s)) + return 0; + s[digits++] = (num % 10) + '0'; + num = num / 10; + } + if (remain < digits) { + /* not enough room left at

to hold number, so fill with + * '?' + */ + for (i = 0; i < remain; i++, p++) + *p = '?'; + return remain; + } + /* plug in the decimal ascii string representing the number, by */ + /* reversing the string we just built in */ + i = digits; + while (i > 0) { + i--; + *p = s[i]; + p++; + } + return digits; +} + +/** + * vbuschannel_devinfo_to_string() - format a struct ultra_vbus_deviceinfo + * to a printable string + * @devinfo: the struct ultra_vbus_deviceinfo to format + * @p: destination string area + * @remain: size of destination string area in bytes + * @devix: the device index to be included in the output data, or -1 if no + * device index is to be included + * + * Reads @devInfo, and converts its contents to a printable string at @p, + * writing at most @remain bytes. Note there is NO '\0' termination + * written to @p. + * + * Return: number of bytes written to @p + */ +static inline int +vbuschannel_devinfo_to_string(struct ultra_vbus_deviceinfo *devinfo, + char *p, int remain, int devix) +{ + char *psrc; + int nsrc, x, i, pad; + int chars = 0; + + psrc = &devinfo->devtype[0]; + nsrc = sizeof(devinfo->devtype); + if (vbuschannel_sanitize_buffer(NULL, 0, psrc, nsrc) <= 0) + return 0; + + /* emit device index */ + if (devix >= 0) { + VBUSCHANNEL_ADDACHAR('[', p, remain, chars); + x = vbuschannel_itoa(p, remain, devix); + p += x; + remain -= x; + chars += x; + VBUSCHANNEL_ADDACHAR(']', p, remain, chars); + } else { + VBUSCHANNEL_ADDACHAR(' ', p, remain, chars); + VBUSCHANNEL_ADDACHAR(' ', p, remain, chars); + VBUSCHANNEL_ADDACHAR(' ', p, remain, chars); + } + + /* emit device type */ + x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc); + p += x; + remain -= x; + chars += x; + pad = 15 - x; /* pad device type to be exactly 15 chars */ + for (i = 0; i < pad; i++) + VBUSCHANNEL_ADDACHAR(' ', p, remain, chars); + VBUSCHANNEL_ADDACHAR(' ', p, remain, chars); + + /* emit driver name */ + psrc = &devinfo->drvname[0]; + nsrc = sizeof(devinfo->drvname); + x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc); + p += x; + remain -= x; + chars += x; + pad = 15 - x; /* pad driver name to be exactly 15 chars */ + for (i = 0; i < pad; i++) + VBUSCHANNEL_ADDACHAR(' ', p, remain, chars); + VBUSCHANNEL_ADDACHAR(' ', p, remain, chars); + + /* emit strings */ + psrc = &devinfo->infostrs[0]; + nsrc = sizeof(devinfo->infostrs); + x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc); + p += x; + remain -= x; + chars += x; + VBUSCHANNEL_ADDACHAR('\n', p, remain, chars); + + return chars; +} + struct spar_vbus_headerinfo { u32 struct_bytes; /* size of this struct in bytes */ u32 device_info_struct_bytes; /* sizeof(ULTRA_VBUS_DEVICEINFO) */ diff --git a/drivers/staging/unisys/visorbus/vbusdeviceinfo.h b/drivers/staging/unisys/visorbus/vbusdeviceinfo.h deleted file mode 100644 index e6bfed1b300e..000000000000 --- a/drivers/staging/unisys/visorbus/vbusdeviceinfo.h +++ /dev/null @@ -1,234 +0,0 @@ -/* Copyright (C) 2010 - 2015 UNISYS CORPORATION - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - */ - -#ifndef __VBUSDEVICEINFO_H__ -#define __VBUSDEVICEINFO_H__ - -#include - -#pragma pack(push, 1) /* both GCC and VC now allow this pragma */ - -/* - * An array of this struct is present in the channel area for each vbus. - * (See vbuschannel.h.) - * It is filled in by the client side to provide info about the device - * and driver from the client's perspective. - */ -struct ultra_vbus_deviceinfo { - u8 devtype[16]; /* short string identifying the device type */ - u8 drvname[16]; /* driver .sys file name */ - u8 infostrs[96]; /* sequence of tab-delimited id strings: */ - /* */ - u8 reserved[128]; /* pad size to 256 bytes */ -}; - -#pragma pack(pop) - -/** - * vbuschannel_sanitize_buffer() - remove non-printable chars from buffer - * @p: destination buffer where chars are written to - * @remain: number of bytes that can be written starting at #p - * @src: pointer to source buffer - * @srcmax: number of valid characters at #src - * - * Reads chars from the buffer at @src for @srcmax bytes, and writes to - * the buffer at @p, which is @remain bytes long, ensuring never to - * overflow the buffer at @p, using the following rules: - * - printable characters are simply copied from the buffer at @src to the - * buffer at @p - * - intervening streaks of non-printable characters in the buffer at @src - * are replaced with a single space in the buffer at @p - * Note that we pay no attention to '\0'-termination. - * - * Pass @p == NULL and @remain == 0 for this special behavior -- In this - * case, we simply return the number of bytes that WOULD HAVE been written - * to a buffer at @p, had it been infinitely big. - * - * Return: the number of bytes written to @p (or WOULD HAVE been written to - * @p, as described in the previous paragraph) - */ -static inline int -vbuschannel_sanitize_buffer(char *p, int remain, char *src, int srcmax) -{ - int chars = 0; - int nonprintable_streak = 0; - - while (srcmax > 0) { - if ((*src >= ' ') && (*src < 0x7f)) { - if (nonprintable_streak) { - if (remain > 0) { - *p = ' '; - p++; - remain--; - chars++; - } else if (!p) { - chars++; - } - nonprintable_streak = 0; - } - if (remain > 0) { - *p = *src; - p++; - remain--; - chars++; - } else if (!p) { - chars++; - } - } else { - nonprintable_streak = 1; - } - src++; - srcmax--; - } - return chars; -} - -#define VBUSCHANNEL_ADDACHAR(ch, p, remain, chars) \ - do { \ - if (remain <= 0) \ - break; \ - *p = ch; \ - p++; chars++; remain--; \ - } while (0) - -/** - * vbuschannel_itoa() - convert non-negative int to string - * @p: destination string - * @remain: max number of bytes that can be written to @p - * @num: input int to convert - * - * Converts the non-negative value at @num to an ascii decimal string - * at @p, writing at most @remain bytes. Note there is NO '\0' termination - * written to @p. - * - * Return: number of bytes written to @p - * - */ -static inline int -vbuschannel_itoa(char *p, int remain, int num) -{ - int digits = 0; - char s[32]; - int i; - - if (num == 0) { - /* '0' is a special case */ - if (remain <= 0) - return 0; - *p = '0'; - return 1; - } - /* form a backwards decimal ascii string in */ - while (num > 0) { - if (digits >= (int)sizeof(s)) - return 0; - s[digits++] = (num % 10) + '0'; - num = num / 10; - } - if (remain < digits) { - /* not enough room left at

to hold number, so fill with - * '?' - */ - for (i = 0; i < remain; i++, p++) - *p = '?'; - return remain; - } - /* plug in the decimal ascii string representing the number, by */ - /* reversing the string we just built in */ - i = digits; - while (i > 0) { - i--; - *p = s[i]; - p++; - } - return digits; -} - -/** - * vbuschannel_devinfo_to_string() - format a struct ultra_vbus_deviceinfo - * to a printable string - * @devinfo: the struct ultra_vbus_deviceinfo to format - * @p: destination string area - * @remain: size of destination string area in bytes - * @devix: the device index to be included in the output data, or -1 if no - * device index is to be included - * - * Reads @devInfo, and converts its contents to a printable string at @p, - * writing at most @remain bytes. Note there is NO '\0' termination - * written to @p. - * - * Return: number of bytes written to @p - */ -static inline int -vbuschannel_devinfo_to_string(struct ultra_vbus_deviceinfo *devinfo, - char *p, int remain, int devix) -{ - char *psrc; - int nsrc, x, i, pad; - int chars = 0; - - psrc = &devinfo->devtype[0]; - nsrc = sizeof(devinfo->devtype); - if (vbuschannel_sanitize_buffer(NULL, 0, psrc, nsrc) <= 0) - return 0; - - /* emit device index */ - if (devix >= 0) { - VBUSCHANNEL_ADDACHAR('[', p, remain, chars); - x = vbuschannel_itoa(p, remain, devix); - p += x; - remain -= x; - chars += x; - VBUSCHANNEL_ADDACHAR(']', p, remain, chars); - } else { - VBUSCHANNEL_ADDACHAR(' ', p, remain, chars); - VBUSCHANNEL_ADDACHAR(' ', p, remain, chars); - VBUSCHANNEL_ADDACHAR(' ', p, remain, chars); - } - - /* emit device type */ - x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc); - p += x; - remain -= x; - chars += x; - pad = 15 - x; /* pad device type to be exactly 15 chars */ - for (i = 0; i < pad; i++) - VBUSCHANNEL_ADDACHAR(' ', p, remain, chars); - VBUSCHANNEL_ADDACHAR(' ', p, remain, chars); - - /* emit driver name */ - psrc = &devinfo->drvname[0]; - nsrc = sizeof(devinfo->drvname); - x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc); - p += x; - remain -= x; - chars += x; - pad = 15 - x; /* pad driver name to be exactly 15 chars */ - for (i = 0; i < pad; i++) - VBUSCHANNEL_ADDACHAR(' ', p, remain, chars); - VBUSCHANNEL_ADDACHAR(' ', p, remain, chars); - - /* emit strings */ - psrc = &devinfo->infostrs[0]; - nsrc = sizeof(devinfo->infostrs); - x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc); - p += x; - remain -= x; - chars += x; - VBUSCHANNEL_ADDACHAR('\n', p, remain, chars); - - return chars; -} - -#endif diff --git a/drivers/staging/unisys/visorbus/visorbus_private.h b/drivers/staging/unisys/visorbus/visorbus_private.h index b10fc1a6330e..2f4e1e6071f5 100644 --- a/drivers/staging/unisys/visorbus/visorbus_private.h +++ b/drivers/staging/unisys/visorbus/visorbus_private.h @@ -20,7 +20,7 @@ #include #include "controlvmchannel.h" -#include "vbusdeviceinfo.h" +#include "vbuschannel.h" /* TARGET_HOSTNAME specified as -DTARGET_HOSTNAME=\"thename\" on the * command line