From: Ben Widawsky Date: Tue, 4 Oct 2011 22:16:48 +0000 (-0700) Subject: drm: Add Panel Self Refresh DP addresses X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b73fe58cafc6954db0170a5d4ef2b4b6316f6709;p=linux-beck.git drm: Add Panel Self Refresh DP addresses Add the addresses and definitions I care about for Panel Self Refresh, as documented in the eDP spec. I'm sending these out before some other patches because this should be a fairly simple one to get upstream and not require too much fuss (where the others may have some fuss). This file is a mess with white spacing. I tried to stay consistent with the surrounding code. v2: had some silly mistakes in v1 which Keith caught Cc: Dave Airlie Cc: Keith Packard Signed-off-by: Ben Widawsky Signed-off-by: Keith Packard --- diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 91567bbdb027..2b1a3585f8d8 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -74,6 +74,20 @@ #define DP_TRAINING_AUX_RD_INTERVAL 0x00e +#define DP_PSR_SUPPORT 0x070 +# define DP_PSR_IS_SUPPORTED 1 +#define DP_PSR_CAPS 0x071 +# define DP_PSR_NO_TRAIN_ON_EXIT 1 +# define DP_PSR_SETUP_TIME_330 (0 << 1) +# define DP_PSR_SETUP_TIME_275 (1 << 1) +# define DP_PSR_SETUP_TIME_220 (2 << 1) +# define DP_PSR_SETUP_TIME_165 (3 << 1) +# define DP_PSR_SETUP_TIME_110 (4 << 1) +# define DP_PSR_SETUP_TIME_55 (5 << 1) +# define DP_PSR_SETUP_TIME_0 (6 << 1) +# define DP_PSR_SETUP_TIME_MASK (7 << 1) +# define DP_PSR_SETUP_TIME_SHIFT 1 + /* link configuration */ #define DP_LINK_BW_SET 0x100 # define DP_LINK_BW_1_62 0x06 @@ -133,6 +147,12 @@ #define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108 # define DP_SET_ANSI_8B10B (1 << 0) +#define DP_PSR_EN_CFG 0x170 +# define DP_PSR_ENABLE (1 << 0) +# define DP_PSR_MAIN_LINK_ACTIVE (1 << 1) +# define DP_PSR_CRC_VERIFICATION (1 << 2) +# define DP_PSR_FRAME_CAPTURE (1 << 3) + #define DP_LANE0_1_STATUS 0x202 #define DP_LANE2_3_STATUS 0x203 # define DP_LANE_CR_DONE (1 << 0) @@ -169,6 +189,22 @@ # define DP_SET_POWER_D0 0x1 # define DP_SET_POWER_D3 0x2 +#define DP_PSR_ERROR_STATUS 0x2006 +# define DP_PSR_LINK_CRC_ERROR (1 << 0) +# define DP_PSR_RFB_STORAGE_ERROR (1 << 1) + +#define DP_PSR_ESI 0x2007 +# define DP_PSR_CAPS_CHANGE (1 << 0) + +#define DP_PSR_STATUS 0x2008 +# define DP_PSR_SINK_INACTIVE 0 +# define DP_PSR_SINK_ACTIVE_SRC_SYNCED 1 +# define DP_PSR_SINK_ACTIVE_RFB 2 +# define DP_PSR_SINK_ACTIVE_SINK_SYNCED 3 +# define DP_PSR_SINK_ACTIVE_RESYNC 4 +# define DP_PSR_SINK_INTERNAL_ERROR 7 +# define DP_PSR_SINK_STATE_MASK 0x07 + #define MODE_I2C_START 1 #define MODE_I2C_WRITE 2 #define MODE_I2C_READ 4