From: Yaniv Gardi Date: Thu, 10 Mar 2016 15:37:18 +0000 (+0200) Subject: scsi: ufs: add device quirk delay before putting UFS rails in LPM X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b799fdf754b5c6c4dad0016826fb6b3e79bccaea;p=linux-beck.git scsi: ufs: add device quirk delay before putting UFS rails in LPM We put the UFS device in sleep state & UFS link in hibern8 state during runtime suspend. After this we put all the UFS rails in low power modes immediately but it seems some devices may still draw more than sleep current from UFS rails (especially from VCCQ rail) at-least for 500us. To avoid this situation, this change adds 2ms delay before putting these UFS rails in LPM mode. Reviewed-by: Gilad Broner Reviewed-by: Hannes Reinecke Signed-off-by: Subhash Jadavani Signed-off-by: Yaniv Gardi Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h index 62ebd89fd787..ee4ab85e2801 100644 --- a/drivers/scsi/ufs/ufs_quirks.h +++ b/drivers/scsi/ufs/ufs_quirks.h @@ -18,7 +18,7 @@ /* return true if s1 is a prefix of s2 */ #define STR_PRFX_EQUAL(s1, s2) !strncmp(s1, s2, strlen(s1)) -#define UFS_ANY_VENDOR -1 +#define UFS_ANY_VENDOR 0xFFFF #define UFS_ANY_MODEL "ANY_MODEL" #define MAX_MODEL_LEN 16 @@ -119,16 +119,28 @@ struct ufs_dev_fix { */ #define UFS_DEVICE_NO_FASTAUTO (1 << 5) +/* + * It seems some UFS devices may keep drawing more than sleep current + * (atleast for 500us) from UFS rails (especially from VCCQ rail). + * To avoid this situation, add 2ms delay before putting these UFS + * rails in LPM mode. + */ +#define UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM (1 << 6) + struct ufs_hba; void ufs_advertise_fixup_device(struct ufs_hba *hba); static struct ufs_dev_fix ufs_fixups[] = { /* UFS cards deviations table */ + UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, + UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM), UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ), UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS), UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_FASTAUTO), + UFS_FIX(UFS_VENDOR_TOSHIBA, UFS_ANY_MODEL, + UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM), UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9C8KBADG", UFS_DEVICE_QUIRK_PA_TACTIVATE), UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9D8KBADG", diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 93cc02f2d48e..f8fa72c31a9d 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -5715,6 +5715,16 @@ out: static void ufshcd_vreg_set_lpm(struct ufs_hba *hba) { + /* + * It seems some UFS devices may keep drawing more than sleep current + * (atleast for 500us) from UFS rails (especially from VCCQ rail). + * To avoid this situation, add 2ms delay before putting these UFS + * rails in LPM mode. + */ + if (!ufshcd_is_link_active(hba) && + hba->dev_quirks & UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM) + usleep_range(2000, 2100); + /* * If UFS device is either in UFS_Sleep turn off VCC rail to save some * power.