From: Magnus Damm Date: Thu, 16 Jul 2015 07:53:52 +0000 (+0900) Subject: ARM: shmobile: marzen: Remove legacy board code X-Git-Tag: v4.3-rc1~123^2~14^2~1 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b97fdb836a36df53de5685278c0126a222903c5e;p=karo-tx-linux.git ARM: shmobile: marzen: Remove legacy board code Remove Marzen legacy board code written in C. Instead board support expressed in DT shall be used together with Multiplatform and shmobile_defconfig. Signed-off-by: Magnus Damm Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 246473a244f6..2e3fabad0f7a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -504,7 +504,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ - r8a7779-marzen.dtb \ sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ emev2-kzm9d.dtb \ diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 3d6f46cb8b18..1fe775c7e004 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -157,13 +157,6 @@ config MACH_BOCKW_REFERENCE This is intended to aid developers -config MACH_MARZEN - bool "MARZEN board" - depends on ARCH_R8A7779 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select USE_OF - config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 08b12b4d3f90..dd214ca8b09e 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -54,7 +54,6 @@ obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o ifndef CONFIG_ARCH_SHMOBILE_MULTI obj-$(CONFIG_MACH_BOCKW) += board-bockw.o obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o -obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o intc-sh73a0.o endif diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index e1ef19cef89c..7e7e0f47848c 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -4,7 +4,6 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 -loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000 __ZRELADDR := $(sort $(loadaddr-y)) zreladdr-y += $(__ZRELADDR) diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c deleted file mode 100644 index 51db288f192a..000000000000 --- a/arch/arm/mach-shmobile/board-marzen.c +++ /dev/null @@ -1,347 +0,0 @@ -/* - * marzen board support - * - * Copyright (C) 2011, 2013 Renesas Solutions Corp. - * Copyright (C) 2011 Magnus Damm - * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "common.h" -#include "irqs.h" -#include "r8a7779.h" - -/* Fixed 3.3V regulator to be used by SDHI0 */ -static struct regulator_consumer_supply fixed3v3_power_consumers[] = { - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), -}; - -/* Dummy supplies, where voltage doesn't matter */ -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x"), - REGULATOR_SUPPLY("vdd33a", "smsc911x"), -}; - -/* USB PHY */ -static struct resource usb_phy_resources[] = { - [0] = { - .start = 0xffe70800, - .end = 0xffe70900 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct rcar_phy_platform_data usb_phy_platform_data; - -static struct platform_device usb_phy = { - .name = "rcar_usb_phy", - .id = -1, - .dev = { - .platform_data = &usb_phy_platform_data, - }, - .resource = usb_phy_resources, - .num_resources = ARRAY_SIZE(usb_phy_resources), -}; - -/* SMSC LAN89218 */ -static struct resource smsc911x_resources[] = { - [0] = { - .start = 0x18000000, /* ExCS0 */ - .end = 0x180000ff, /* A1->A7 */ - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = irq_pin(1), /* IRQ 1 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct smsc911x_platform_config smsc911x_platdata = { - .flags = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */ - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, -}; - -static struct platform_device eth_device = { - .name = "smsc911x", - .id = -1, - .dev = { - .platform_data = &smsc911x_platdata, - }, - .resource = smsc911x_resources, - .num_resources = ARRAY_SIZE(smsc911x_resources), -}; - -static struct resource sdhi0_resources[] = { - [0] = { - .name = "sdhi0", - .start = 0xffe4c000, - .end = 0xffe4c0ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_iid(0x88), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct tmio_mmc_data sdhi0_platform_data = { - .chan_priv_tx = (void *)HPBDMA_SLAVE_SDHI0_TX, - .chan_priv_rx = (void *)HPBDMA_SLAVE_SDHI0_RX, - .flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, - .capabilities = MMC_CAP_SD_HIGHSPEED, -}; - -static struct platform_device sdhi0_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi0_resources), - .resource = sdhi0_resources, - .id = 0, - .dev = { - .platform_data = &sdhi0_platform_data, - } -}; - -/* Thermal */ -static struct resource thermal_resources[] = { - [0] = { - .start = 0xFFC48000, - .end = 0xFFC48038 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device thermal_device = { - .name = "rcar_thermal", - .resource = thermal_resources, - .num_resources = ARRAY_SIZE(thermal_resources), -}; - -/* HSPI */ -static struct resource hspi_resources[] = { - [0] = { - .start = 0xFFFC7000, - .end = 0xFFFC7018 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device hspi_device = { - .name = "sh-hspi", - .id = 0, - .resource = hspi_resources, - .num_resources = ARRAY_SIZE(hspi_resources), -}; - -/* LEDS */ -static struct gpio_led marzen_leds[] = { - { - .name = "led2", - .gpio = RCAR_GP_PIN(4, 29), - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, { - .name = "led3", - .gpio = RCAR_GP_PIN(4, 30), - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, { - .name = "led4", - .gpio = RCAR_GP_PIN(4, 31), - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, -}; - -static struct gpio_led_platform_data marzen_leds_pdata = { - .leds = marzen_leds, - .num_leds = ARRAY_SIZE(marzen_leds), -}; - -static struct platform_device leds_device = { - .name = "leds-gpio", - .id = 0, - .dev = { - .platform_data = &marzen_leds_pdata, - }, -}; - -/* VIN */ -static struct rcar_vin_platform_data vin_platform_data __initdata = { - .flags = RCAR_VIN_BT656, -}; - -#define MARZEN_VIN(idx) \ -static struct resource vin##idx##_resources[] __initdata = { \ - DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \ - DEFINE_RES_IRQ(gic_iid(0x5f + (idx))), \ -}; \ - \ -static struct platform_device_info vin##idx##_info __initdata = { \ - .name = "r8a7779-vin", \ - .id = idx, \ - .res = vin##idx##_resources, \ - .num_res = ARRAY_SIZE(vin##idx##_resources), \ - .dma_mask = DMA_BIT_MASK(32), \ - .data = &vin_platform_data, \ - .size_data = sizeof(vin_platform_data), \ -} -MARZEN_VIN(1); -MARZEN_VIN(3); - -#define MARZEN_CAMERA(idx) \ -static struct i2c_board_info camera##idx##_info = { \ - I2C_BOARD_INFO("adv7180", 0x20 + (idx)), \ -}; \ - \ -static struct soc_camera_link iclink##idx##_adv7180 = { \ - .bus_id = 1 + 2 * (idx), \ - .i2c_adapter_id = 0, \ - .board_info = &camera##idx##_info, \ -}; \ - \ -static struct platform_device camera##idx##_device = { \ - .name = "soc-camera-pdrv", \ - .id = idx, \ - .dev = { \ - .platform_data = &iclink##idx##_adv7180, \ - }, \ -}; - -MARZEN_CAMERA(0); -MARZEN_CAMERA(1); - -static struct platform_device *marzen_devices[] __initdata = { - ð_device, - &sdhi0_device, - &thermal_device, - &hspi_device, - &leds_device, - &usb_phy, - &camera0_device, - &camera1_device, -}; - -static const struct pinctrl_map marzen_pinctrl_map[] = { - /* DU (CN10: ARGB0, CN13: LVDS) */ - PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", - "du0_rgb888", "du0"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", - "du0_sync_1", "du0"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", - "du0_clk_out_0", "du0"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", - "du1_rgb666", "du1"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", - "du1_sync_1", "du1"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", - "du1_clk_out", "du1"), - /* HSPI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779", - "hspi0", "hspi0"), - /* SCIF2 (CN18: DEBUG0) */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779", - "scif2_data_c", "scif2"), - /* SCIF4 (CN19: DEBUG1) */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779", - "scif4_data", "scif4"), - /* SDHI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", - "sdhi0_data4", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", - "sdhi0_ctrl", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", - "sdhi0_cd", "sdhi0"), - /* SMSC */ - PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779", - "intc_irq1_b", "intc"), - PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779", - "lbsc_ex_cs0", "lbsc"), - /* USB0 */ - PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779", - "usb0", "usb0"), - /* USB1 */ - PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779", - "usb1", "usb1"), - /* USB2 */ - PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.1", "pfc-r8a7779", - "usb2", "usb2"), - /* VIN1 */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.1", "pfc-r8a7779", - "vin1_clk", "vin1"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.1", "pfc-r8a7779", - "vin1_data8", "vin1"), - /* VIN3 */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.3", "pfc-r8a7779", - "vin3_clk", "vin3"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.3", "pfc-r8a7779", - "vin3_data8", "vin3"), -}; - -static void __init marzen_init(void) -{ - regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); - regulator_register_fixed(1, dummy_supplies, - ARRAY_SIZE(dummy_supplies)); - - pinctrl_register_mappings(marzen_pinctrl_map, - ARRAY_SIZE(marzen_pinctrl_map)); - r8a7779_pinmux_init(); - r8a7779_init_irq_extpin(1); /* IRQ1 as individual interrupt */ - - r8a7779_add_standard_devices(); - platform_device_register_full(&vin1_info); - platform_device_register_full(&vin3_info); - platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices)); -} - -static const char *marzen_boards_compat_dt[] __initdata = { - "renesas,marzen", - NULL, -}; - -DT_MACHINE_START(MARZEN, "marzen") - .smp = smp_ops(r8a7779_smp_ops), - .map_io = r8a7779_map_io, - .init_early = r8a7779_add_early_devices, - .init_irq = r8a7779_init_irq_dt, - .init_machine = marzen_init, - .init_late = r8a7779_init_late, - .dt_compat = marzen_boards_compat_dt, - .init_time = r8a7779_earlytimer_init, -MACHINE_END