From: Marc Zyngier Date: Tue, 5 Jan 2016 18:45:17 +0000 (+0000) Subject: ARM: KVM: Remove the old world switch X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b98e2e728eed3091edbce64cfcc447a482b7726c;p=linux-beck.git ARM: KVM: Remove the old world switch As we now have a full reimplementation of the world switch, it is time to kiss the old stuff goodbye. I'm not sure we'll miss it. Acked-by: Christoffer Dall Signed-off-by: Marc Zyngier --- diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index 01eb169f38f6..b1bd316f14c0 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -17,198 +17,8 @@ */ #include -#include -#include -#include -#include -#include -#include -#include -#include -#include "interrupts_head.S" .text - .pushsection .hyp.text, "ax" - -/******************************************************************** - * Flush per-VMID TLBs - * - * void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); - * - * We rely on the hardware to broadcast the TLB invalidation to all CPUs - * inside the inner-shareable domain (which is the case for all v7 - * implementations). If we come across a non-IS SMP implementation, we'll - * have to use an IPI based mechanism. Until then, we stick to the simple - * hardware assisted version. - * - * As v7 does not support flushing per IPA, just nuke the whole TLB - * instead, ignoring the ipa value. - */ -ENTRY(__kvm_tlb_flush_vmid_ipa) - push {r2, r3} - - dsb ishst - add r0, r0, #KVM_VTTBR - ldrd r2, r3, [r0] - mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR - isb - mcr p15, 0, r0, c8, c3, 0 @ TLBIALLIS (rt ignored) - dsb ish - isb - mov r2, #0 - mov r3, #0 - mcrr p15, 6, r2, r3, c2 @ Back to VMID #0 - isb @ Not necessary if followed by eret - - pop {r2, r3} - bx lr -ENDPROC(__kvm_tlb_flush_vmid_ipa) - -/** - * void __kvm_tlb_flush_vmid(struct kvm *kvm) - Flush per-VMID TLBs - * - * Reuses __kvm_tlb_flush_vmid_ipa() for ARMv7, without passing address - * parameter - */ - -ENTRY(__kvm_tlb_flush_vmid) - b __kvm_tlb_flush_vmid_ipa -ENDPROC(__kvm_tlb_flush_vmid) - -/******************************************************************** - * Flush TLBs and instruction caches of all CPUs inside the inner-shareable - * domain, for all VMIDs - * - * void __kvm_flush_vm_context(void); - */ -ENTRY(__kvm_flush_vm_context) - mov r0, #0 @ rn parameter for c15 flushes is SBZ - - /* Invalidate NS Non-Hyp TLB Inner Shareable (TLBIALLNSNHIS) */ - mcr p15, 4, r0, c8, c3, 4 - /* Invalidate instruction caches Inner Shareable (ICIALLUIS) */ - mcr p15, 0, r0, c7, c1, 0 - dsb ish - isb @ Not necessary if followed by eret - - bx lr -ENDPROC(__kvm_flush_vm_context) - - -/******************************************************************** - * Hypervisor world-switch code - * - * - * int __kvm_vcpu_run(struct kvm_vcpu *vcpu) - */ -ENTRY(__kvm_vcpu_run) - @ Save the vcpu pointer - mcr p15, 4, vcpu, c13, c0, 2 @ HTPIDR - - save_host_regs - - restore_vgic_state - restore_timer_state - - @ Store hardware CP15 state and load guest state - read_cp15_state store_to_vcpu = 0 - write_cp15_state read_from_vcpu = 1 - - @ If the host kernel has not been configured with VFPv3 support, - @ then it is safer if we deny guests from using it as well. -#ifdef CONFIG_VFPv3 - @ Set FPEXC_EN so the guest doesn't trap floating point instructions - VFPFMRX r2, FPEXC @ VMRS - push {r2} - orr r2, r2, #FPEXC_EN - VFPFMXR FPEXC, r2 @ VMSR -#endif - - @ Configure Hyp-role - configure_hyp_role vmentry - - @ Trap coprocessor CRx accesses - set_hstr vmentry - set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) - set_hdcr vmentry - - @ Write configured ID register into MIDR alias - ldr r1, [vcpu, #VCPU_MIDR] - mcr p15, 4, r1, c0, c0, 0 - - @ Write guest view of MPIDR into VMPIDR - ldr r1, [vcpu, #CP15_OFFSET(c0_MPIDR)] - mcr p15, 4, r1, c0, c0, 5 - - @ Set up guest memory translation - ldr r1, [vcpu, #VCPU_KVM] - add r1, r1, #KVM_VTTBR - ldrd r2, r3, [r1] - mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR - - @ We're all done, just restore the GPRs and go to the guest - restore_guest_regs - clrex @ Clear exclusive monitor - eret - -__kvm_vcpu_return: - /* - * return convention: - * guest r0, r1, r2 saved on the stack - * r0: vcpu pointer - * r1: exception code - */ - save_guest_regs - - @ Set VMID == 0 - mov r2, #0 - mov r3, #0 - mcrr p15, 6, r2, r3, c2 @ Write VTTBR - - @ Don't trap coprocessor accesses for host kernel - set_hstr vmexit - set_hdcr vmexit - set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore - -#ifdef CONFIG_VFPv3 - @ Switch VFP/NEON hardware state to the host's - add r7, vcpu, #(VCPU_GUEST_CTXT + CPU_CTXT_VFP) - store_vfp_state r7 - add r7, vcpu, #VCPU_HOST_CTXT - ldr r7, [r7] - add r7, r7, #CPU_CTXT_VFP - restore_vfp_state r7 - -after_vfp_restore: - @ Restore FPEXC_EN which we clobbered on entry - pop {r2} - VFPFMXR FPEXC, r2 -#else -after_vfp_restore: -#endif - - @ Reset Hyp-role - configure_hyp_role vmexit - - @ Let host read hardware MIDR - mrc p15, 0, r2, c0, c0, 0 - mcr p15, 4, r2, c0, c0, 0 - - @ Back to hardware MPIDR - mrc p15, 0, r2, c0, c0, 5 - mcr p15, 4, r2, c0, c0, 5 - - @ Store guest CP15 state and restore host state - read_cp15_state store_to_vcpu = 1 - write_cp15_state read_from_vcpu = 0 - - save_timer_state - save_vgic_state - - restore_host_regs - clrex @ Clear exclusive monitor - mov r0, r1 @ Return the return code - bx lr @ return to IOCTL /******************************************************************** * Call function in Hyp mode @@ -239,281 +49,4 @@ after_vfp_restore: ENTRY(kvm_call_hyp) hvc #0 bx lr - -/******************************************************************** - * Hypervisor exception vector and handlers - * - * - * The KVM/ARM Hypervisor ABI is defined as follows: - * - * Entry to Hyp mode from the host kernel will happen _only_ when an HVC - * instruction is issued since all traps are disabled when running the host - * kernel as per the Hyp-mode initialization at boot time. - * - * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc - * below) when the HVC instruction is called from SVC mode (i.e. a guest or the - * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC - * instructions are called from within Hyp-mode. - * - * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): - * Switching to Hyp mode is done through a simple HVC #0 instruction. The - * exception vector code will check that the HVC comes from VMID==0 and if - * so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - * - r0 contains a pointer to a HYP function - * - r1, r2, and r3 contain arguments to the above function. - * - The HYP function will be called with its arguments in r0, r1 and r2. - * On HYP function return, we return directly to SVC. - * - * Note that the above is used to execute code in Hyp-mode from a host-kernel - * point of view, and is a different concept from performing a world-switch and - * executing guest code SVC mode (with a VMID != 0). - */ - -/* Handle undef, svc, pabt, or dabt by crashing with a user notice */ -.macro bad_exception exception_code, panic_str - push {r0-r2} - mrrc p15, 6, r0, r1, c2 @ Read VTTBR - lsr r1, r1, #16 - ands r1, r1, #0xff - beq 99f - - load_vcpu @ Load VCPU pointer - .if \exception_code == ARM_EXCEPTION_DATA_ABORT - mrc p15, 4, r2, c5, c2, 0 @ HSR - mrc p15, 4, r1, c6, c0, 0 @ HDFAR - str r2, [vcpu, #VCPU_HSR] - str r1, [vcpu, #VCPU_HxFAR] - .endif - .if \exception_code == ARM_EXCEPTION_PREF_ABORT - mrc p15, 4, r2, c5, c2, 0 @ HSR - mrc p15, 4, r1, c6, c0, 2 @ HIFAR - str r2, [vcpu, #VCPU_HSR] - str r1, [vcpu, #VCPU_HxFAR] - .endif - mov r1, #\exception_code - b __kvm_vcpu_return - - @ We were in the host already. Let's craft a panic-ing return to SVC. -99: mrs r2, cpsr - bic r2, r2, #MODE_MASK - orr r2, r2, #SVC_MODE -THUMB( orr r2, r2, #PSR_T_BIT ) - msr spsr_cxsf, r2 - mrs r1, ELR_hyp - ldr r2, =panic - msr ELR_hyp, r2 - ldr r0, =\panic_str - clrex @ Clear exclusive monitor - eret -.endm - - .align 5 -__kvm_hyp_vector: - .globl __kvm_hyp_vector - - @ Hyp-mode exception vector - W(b) hyp_reset - W(b) hyp_undef - W(b) hyp_svc - W(b) hyp_pabt - W(b) hyp_dabt - W(b) hyp_hvc - W(b) hyp_irq - W(b) hyp_fiq - - .align -hyp_reset: - b hyp_reset - - .align -hyp_undef: - bad_exception ARM_EXCEPTION_UNDEFINED, und_die_str - - .align -hyp_svc: - bad_exception ARM_EXCEPTION_HVC, svc_die_str - - .align -hyp_pabt: - bad_exception ARM_EXCEPTION_PREF_ABORT, pabt_die_str - - .align -hyp_dabt: - bad_exception ARM_EXCEPTION_DATA_ABORT, dabt_die_str - - .align -hyp_hvc: - /* - * Getting here is either becuase of a trap from a guest or from calling - * HVC from the host kernel, which means "switch to Hyp mode". - */ - push {r0, r1, r2} - - @ Check syndrome register - mrc p15, 4, r1, c5, c2, 0 @ HSR - lsr r0, r1, #HSR_EC_SHIFT - cmp r0, #HSR_EC_HVC - bne guest_trap @ Not HVC instr. - - /* - * Let's check if the HVC came from VMID 0 and allow simple - * switch to Hyp mode - */ - mrrc p15, 6, r0, r2, c2 - lsr r2, r2, #16 - and r2, r2, #0xff - cmp r2, #0 - bne guest_trap @ Guest called HVC - - /* - * Getting here means host called HVC, we shift parameters and branch - * to Hyp function. - */ - pop {r0, r1, r2} - - /* Check for __hyp_get_vectors */ - cmp r0, #-1 - mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR - beq 1f - - push {lr} - mrs lr, SPSR - push {lr} - - mov lr, r0 - mov r0, r1 - mov r1, r2 - mov r2, r3 - -THUMB( orr lr, #1) - blx lr @ Call the HYP function - - pop {lr} - msr SPSR_csxf, lr - pop {lr} -1: eret - -guest_trap: - load_vcpu @ Load VCPU pointer to r0 - str r1, [vcpu, #VCPU_HSR] - - @ Check if we need the fault information - lsr r1, r1, #HSR_EC_SHIFT -#ifdef CONFIG_VFPv3 - cmp r1, #HSR_EC_CP_0_13 - beq switch_to_guest_vfp -#endif - cmp r1, #HSR_EC_IABT - mrceq p15, 4, r2, c6, c0, 2 @ HIFAR - beq 2f - cmp r1, #HSR_EC_DABT - bne 1f - mrc p15, 4, r2, c6, c0, 0 @ HDFAR - -2: str r2, [vcpu, #VCPU_HxFAR] - - /* - * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode: - * - * Abort on the stage 2 translation for a memory access from a - * Non-secure PL1 or PL0 mode: - * - * For any Access flag fault or Translation fault, and also for any - * Permission fault on the stage 2 translation of a memory access - * made as part of a translation table walk for a stage 1 translation, - * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR - * is UNKNOWN. - */ - - /* Check for permission fault, and S1PTW */ - mrc p15, 4, r1, c5, c2, 0 @ HSR - and r0, r1, #HSR_FSC_TYPE - cmp r0, #FSC_PERM - tsteq r1, #(1 << 7) @ S1PTW - mrcne p15, 4, r2, c6, c0, 4 @ HPFAR - bne 3f - - /* Preserve PAR */ - mrrc p15, 0, r0, r1, c7 @ PAR - push {r0, r1} - - /* Resolve IPA using the xFAR */ - mcr p15, 0, r2, c7, c8, 0 @ ATS1CPR - isb - mrrc p15, 0, r0, r1, c7 @ PAR - tst r0, #1 - bne 4f @ Failed translation - ubfx r2, r0, #12, #20 - lsl r2, r2, #4 - orr r2, r2, r1, lsl #24 - - /* Restore PAR */ - pop {r0, r1} - mcrr p15, 0, r0, r1, c7 @ PAR - -3: load_vcpu @ Load VCPU pointer to r0 - str r2, [r0, #VCPU_HPFAR] - -1: mov r1, #ARM_EXCEPTION_HVC - b __kvm_vcpu_return - -4: pop {r0, r1} @ Failed translation, return to guest - mcrr p15, 0, r0, r1, c7 @ PAR - clrex - pop {r0, r1, r2} - eret - -/* - * If VFPv3 support is not available, then we will not switch the VFP - * registers; however cp10 and cp11 accesses will still trap and fallback - * to the regular coprocessor emulation code, which currently will - * inject an undefined exception to the guest. - */ -#ifdef CONFIG_VFPv3 -switch_to_guest_vfp: - push {r3-r7} - - @ NEON/VFP used. Turn on VFP access. - set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11)) - - @ Switch VFP/NEON hardware state to the guest's - add r7, r0, #VCPU_HOST_CTXT - ldr r7, [r7] - add r7, r7, #CPU_CTXT_VFP - store_vfp_state r7 - add r7, r0, #(VCPU_GUEST_CTXT + CPU_CTXT_VFP) - restore_vfp_state r7 - - pop {r3-r7} - pop {r0-r2} - clrex - eret -#endif - - .align -hyp_irq: - push {r0, r1, r2} - mov r1, #ARM_EXCEPTION_IRQ - load_vcpu @ Load VCPU pointer to r0 - b __kvm_vcpu_return - - .align -hyp_fiq: - b hyp_fiq - - .ltorg - - .popsection - - .pushsection ".rodata" - -und_die_str: - .ascii "unexpected undefined exception in Hyp mode at: %#08x\n" -pabt_die_str: - .ascii "unexpected prefetch abort in Hyp mode at: %#08x\n" -dabt_die_str: - .ascii "unexpected data abort in Hyp mode at: %#08x\n" -svc_die_str: - .ascii "unexpected HVC/SVC trap in Hyp mode at: %#08x\n" - - .popsection +ENDPROC(kvm_call_hyp) diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S deleted file mode 100644 index e0943cb80ab3..000000000000 --- a/arch/arm/kvm/interrupts_head.S +++ /dev/null @@ -1,660 +0,0 @@ -#include -#include - -/* Compat macro, until we get rid of this file entierely */ -#define VCPU_GP_REGS (VCPU_GUEST_CTXT + CPU_CTXT_GP_REGS) -#define VCPU_USR_REGS (VCPU_GP_REGS + GP_REGS_USR) -#define VCPU_SVC_REGS (VCPU_GP_REGS + GP_REGS_SVC) -#define VCPU_ABT_REGS (VCPU_GP_REGS + GP_REGS_ABT) -#define VCPU_UND_REGS (VCPU_GP_REGS + GP_REGS_UND) -#define VCPU_IRQ_REGS (VCPU_GP_REGS + GP_REGS_IRQ) -#define VCPU_FIQ_REGS (VCPU_GP_REGS + GP_REGS_FIQ) -#define VCPU_PC (VCPU_GP_REGS + GP_REGS_PC) -#define VCPU_CPSR (VCPU_GP_REGS + GP_REGS_CPSR) - -#define VCPU_USR_REG(_reg_nr) (VCPU_USR_REGS + (_reg_nr * 4)) -#define VCPU_USR_SP (VCPU_USR_REG(13)) -#define VCPU_USR_LR (VCPU_USR_REG(14)) -#define VCPU_CP15_BASE (VCPU_GUEST_CTXT + CPU_CTXT_CP15) -#define CP15_OFFSET(_cp15_reg_idx) (VCPU_CP15_BASE + (_cp15_reg_idx * 4)) - -/* - * Many of these macros need to access the VCPU structure, which is always - * held in r0. These macros should never clobber r1, as it is used to hold the - * exception code on the return path (except of course the macro that switches - * all the registers before the final jump to the VM). - */ -vcpu .req r0 @ vcpu pointer always in r0 - -/* Clobbers {r2-r6} */ -.macro store_vfp_state vfp_base - @ The VFPFMRX and VFPFMXR macros are the VMRS and VMSR instructions - VFPFMRX r2, FPEXC - @ Make sure VFP is enabled so we can touch the registers. - orr r6, r2, #FPEXC_EN - VFPFMXR FPEXC, r6 - - VFPFMRX r3, FPSCR - tst r2, #FPEXC_EX @ Check for VFP Subarchitecture - beq 1f - @ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so - @ we only need to save them if FPEXC_EX is set. - VFPFMRX r4, FPINST - tst r2, #FPEXC_FP2V - VFPFMRX r5, FPINST2, ne @ vmrsne - bic r6, r2, #FPEXC_EX @ FPEXC_EX disable - VFPFMXR FPEXC, r6 -1: - VFPFSTMIA \vfp_base, r6 @ Save VFP registers - stm \vfp_base, {r2-r5} @ Save FPEXC, FPSCR, FPINST, FPINST2 -.endm - -/* Assume FPEXC_EN is on and FPEXC_EX is off, clobbers {r2-r6} */ -.macro restore_vfp_state vfp_base - VFPFLDMIA \vfp_base, r6 @ Load VFP registers - ldm \vfp_base, {r2-r5} @ Load FPEXC, FPSCR, FPINST, FPINST2 - - VFPFMXR FPSCR, r3 - tst r2, #FPEXC_EX @ Check for VFP Subarchitecture - beq 1f - VFPFMXR FPINST, r4 - tst r2, #FPEXC_FP2V - VFPFMXR FPINST2, r5, ne -1: - VFPFMXR FPEXC, r2 @ FPEXC (last, in case !EN) -.endm - -/* These are simply for the macros to work - value don't have meaning */ -.equ usr, 0 -.equ svc, 1 -.equ abt, 2 -.equ und, 3 -.equ irq, 4 -.equ fiq, 5 - -.macro push_host_regs_mode mode - mrs r2, SP_\mode - mrs r3, LR_\mode - mrs r4, SPSR_\mode - push {r2, r3, r4} -.endm - -/* - * Store all host persistent registers on the stack. - * Clobbers all registers, in all modes, except r0 and r1. - */ -.macro save_host_regs - /* Hyp regs. Only ELR_hyp (SPSR_hyp already saved) */ - mrs r2, ELR_hyp - push {r2} - - /* usr regs */ - push {r4-r12} @ r0-r3 are always clobbered - mrs r2, SP_usr - mov r3, lr - push {r2, r3} - - push_host_regs_mode svc - push_host_regs_mode abt - push_host_regs_mode und - push_host_regs_mode irq - - /* fiq regs */ - mrs r2, r8_fiq - mrs r3, r9_fiq - mrs r4, r10_fiq - mrs r5, r11_fiq - mrs r6, r12_fiq - mrs r7, SP_fiq - mrs r8, LR_fiq - mrs r9, SPSR_fiq - push {r2-r9} -.endm - -.macro pop_host_regs_mode mode - pop {r2, r3, r4} - msr SP_\mode, r2 - msr LR_\mode, r3 - msr SPSR_\mode, r4 -.endm - -/* - * Restore all host registers from the stack. - * Clobbers all registers, in all modes, except r0 and r1. - */ -.macro restore_host_regs - pop {r2-r9} - msr r8_fiq, r2 - msr r9_fiq, r3 - msr r10_fiq, r4 - msr r11_fiq, r5 - msr r12_fiq, r6 - msr SP_fiq, r7 - msr LR_fiq, r8 - msr SPSR_fiq, r9 - - pop_host_regs_mode irq - pop_host_regs_mode und - pop_host_regs_mode abt - pop_host_regs_mode svc - - pop {r2, r3} - msr SP_usr, r2 - mov lr, r3 - pop {r4-r12} - - pop {r2} - msr ELR_hyp, r2 -.endm - -/* - * Restore SP, LR and SPSR for a given mode. offset is the offset of - * this mode's registers from the VCPU base. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r1, r2, r3, r4. - */ -.macro restore_guest_regs_mode mode, offset - add r1, vcpu, \offset - ldm r1, {r2, r3, r4} - msr SP_\mode, r2 - msr LR_\mode, r3 - msr SPSR_\mode, r4 -.endm - -/* - * Restore all guest registers from the vcpu struct. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers *all* registers. - */ -.macro restore_guest_regs - restore_guest_regs_mode svc, #VCPU_SVC_REGS - restore_guest_regs_mode abt, #VCPU_ABT_REGS - restore_guest_regs_mode und, #VCPU_UND_REGS - restore_guest_regs_mode irq, #VCPU_IRQ_REGS - - add r1, vcpu, #VCPU_FIQ_REGS - ldm r1, {r2-r9} - msr r8_fiq, r2 - msr r9_fiq, r3 - msr r10_fiq, r4 - msr r11_fiq, r5 - msr r12_fiq, r6 - msr SP_fiq, r7 - msr LR_fiq, r8 - msr SPSR_fiq, r9 - - @ Load return state - ldr r2, [vcpu, #VCPU_PC] - ldr r3, [vcpu, #VCPU_CPSR] - msr ELR_hyp, r2 - msr SPSR_cxsf, r3 - - @ Load user registers - ldr r2, [vcpu, #VCPU_USR_SP] - ldr r3, [vcpu, #VCPU_USR_LR] - msr SP_usr, r2 - mov lr, r3 - add vcpu, vcpu, #(VCPU_USR_REGS) - ldm vcpu, {r0-r12} -.endm - -/* - * Save SP, LR and SPSR for a given mode. offset is the offset of - * this mode's registers from the VCPU base. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2, r3, r4, r5. - */ -.macro save_guest_regs_mode mode, offset - add r2, vcpu, \offset - mrs r3, SP_\mode - mrs r4, LR_\mode - mrs r5, SPSR_\mode - stm r2, {r3, r4, r5} -.endm - -/* - * Save all guest registers to the vcpu struct - * Expects guest's r0, r1, r2 on the stack. - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2, r3, r4, r5. - */ -.macro save_guest_regs - @ Store usr registers - add r2, vcpu, #VCPU_USR_REG(3) - stm r2, {r3-r12} - add r2, vcpu, #VCPU_USR_REG(0) - pop {r3, r4, r5} @ r0, r1, r2 - stm r2, {r3, r4, r5} - mrs r2, SP_usr - mov r3, lr - str r2, [vcpu, #VCPU_USR_SP] - str r3, [vcpu, #VCPU_USR_LR] - - @ Store return state - mrs r2, ELR_hyp - mrs r3, spsr - str r2, [vcpu, #VCPU_PC] - str r3, [vcpu, #VCPU_CPSR] - - @ Store other guest registers - save_guest_regs_mode svc, #VCPU_SVC_REGS - save_guest_regs_mode abt, #VCPU_ABT_REGS - save_guest_regs_mode und, #VCPU_UND_REGS - save_guest_regs_mode irq, #VCPU_IRQ_REGS -.endm - -/* Reads cp15 registers from hardware and stores them in memory - * @store_to_vcpu: If 0, registers are written in-order to the stack, - * otherwise to the VCPU struct pointed to by vcpup - * - * Assumes vcpu pointer in vcpu reg - * - * Clobbers r2 - r12 - */ -.macro read_cp15_state store_to_vcpu - mrc p15, 0, r2, c1, c0, 0 @ SCTLR - mrc p15, 0, r3, c1, c0, 2 @ CPACR - mrc p15, 0, r4, c2, c0, 2 @ TTBCR - mrc p15, 0, r5, c3, c0, 0 @ DACR - mrrc p15, 0, r6, r7, c2 @ TTBR 0 - mrrc p15, 1, r8, r9, c2 @ TTBR 1 - mrc p15, 0, r10, c10, c2, 0 @ PRRR - mrc p15, 0, r11, c10, c2, 1 @ NMRR - mrc p15, 2, r12, c0, c0, 0 @ CSSELR - - .if \store_to_vcpu == 0 - push {r2-r12} @ Push CP15 registers - .else - str r2, [vcpu, #CP15_OFFSET(c1_SCTLR)] - str r3, [vcpu, #CP15_OFFSET(c1_CPACR)] - str r4, [vcpu, #CP15_OFFSET(c2_TTBCR)] - str r5, [vcpu, #CP15_OFFSET(c3_DACR)] - add r2, vcpu, #CP15_OFFSET(c2_TTBR0) - strd r6, r7, [r2] - add r2, vcpu, #CP15_OFFSET(c2_TTBR1) - strd r8, r9, [r2] - str r10, [vcpu, #CP15_OFFSET(c10_PRRR)] - str r11, [vcpu, #CP15_OFFSET(c10_NMRR)] - str r12, [vcpu, #CP15_OFFSET(c0_CSSELR)] - .endif - - mrc p15, 0, r2, c13, c0, 1 @ CID - mrc p15, 0, r3, c13, c0, 2 @ TID_URW - mrc p15, 0, r4, c13, c0, 3 @ TID_URO - mrc p15, 0, r5, c13, c0, 4 @ TID_PRIV - mrc p15, 0, r6, c5, c0, 0 @ DFSR - mrc p15, 0, r7, c5, c0, 1 @ IFSR - mrc p15, 0, r8, c5, c1, 0 @ ADFSR - mrc p15, 0, r9, c5, c1, 1 @ AIFSR - mrc p15, 0, r10, c6, c0, 0 @ DFAR - mrc p15, 0, r11, c6, c0, 2 @ IFAR - mrc p15, 0, r12, c12, c0, 0 @ VBAR - - .if \store_to_vcpu == 0 - push {r2-r12} @ Push CP15 registers - .else - str r2, [vcpu, #CP15_OFFSET(c13_CID)] - str r3, [vcpu, #CP15_OFFSET(c13_TID_URW)] - str r4, [vcpu, #CP15_OFFSET(c13_TID_URO)] - str r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)] - str r6, [vcpu, #CP15_OFFSET(c5_DFSR)] - str r7, [vcpu, #CP15_OFFSET(c5_IFSR)] - str r8, [vcpu, #CP15_OFFSET(c5_ADFSR)] - str r9, [vcpu, #CP15_OFFSET(c5_AIFSR)] - str r10, [vcpu, #CP15_OFFSET(c6_DFAR)] - str r11, [vcpu, #CP15_OFFSET(c6_IFAR)] - str r12, [vcpu, #CP15_OFFSET(c12_VBAR)] - .endif - - mrc p15, 0, r2, c14, c1, 0 @ CNTKCTL - mrrc p15, 0, r4, r5, c7 @ PAR - mrc p15, 0, r6, c10, c3, 0 @ AMAIR0 - mrc p15, 0, r7, c10, c3, 1 @ AMAIR1 - - .if \store_to_vcpu == 0 - push {r2,r4-r7} - .else - str r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)] - add r12, vcpu, #CP15_OFFSET(c7_PAR) - strd r4, r5, [r12] - str r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)] - str r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)] - .endif -.endm - -/* - * Reads cp15 registers from memory and writes them to hardware - * @read_from_vcpu: If 0, registers are read in-order from the stack, - * otherwise from the VCPU struct pointed to by vcpup - * - * Assumes vcpu pointer in vcpu reg - */ -.macro write_cp15_state read_from_vcpu - .if \read_from_vcpu == 0 - pop {r2,r4-r7} - .else - ldr r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)] - add r12, vcpu, #CP15_OFFSET(c7_PAR) - ldrd r4, r5, [r12] - ldr r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)] - ldr r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)] - .endif - - mcr p15, 0, r2, c14, c1, 0 @ CNTKCTL - mcrr p15, 0, r4, r5, c7 @ PAR - mcr p15, 0, r6, c10, c3, 0 @ AMAIR0 - mcr p15, 0, r7, c10, c3, 1 @ AMAIR1 - - .if \read_from_vcpu == 0 - pop {r2-r12} - .else - ldr r2, [vcpu, #CP15_OFFSET(c13_CID)] - ldr r3, [vcpu, #CP15_OFFSET(c13_TID_URW)] - ldr r4, [vcpu, #CP15_OFFSET(c13_TID_URO)] - ldr r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)] - ldr r6, [vcpu, #CP15_OFFSET(c5_DFSR)] - ldr r7, [vcpu, #CP15_OFFSET(c5_IFSR)] - ldr r8, [vcpu, #CP15_OFFSET(c5_ADFSR)] - ldr r9, [vcpu, #CP15_OFFSET(c5_AIFSR)] - ldr r10, [vcpu, #CP15_OFFSET(c6_DFAR)] - ldr r11, [vcpu, #CP15_OFFSET(c6_IFAR)] - ldr r12, [vcpu, #CP15_OFFSET(c12_VBAR)] - .endif - - mcr p15, 0, r2, c13, c0, 1 @ CID - mcr p15, 0, r3, c13, c0, 2 @ TID_URW - mcr p15, 0, r4, c13, c0, 3 @ TID_URO - mcr p15, 0, r5, c13, c0, 4 @ TID_PRIV - mcr p15, 0, r6, c5, c0, 0 @ DFSR - mcr p15, 0, r7, c5, c0, 1 @ IFSR - mcr p15, 0, r8, c5, c1, 0 @ ADFSR - mcr p15, 0, r9, c5, c1, 1 @ AIFSR - mcr p15, 0, r10, c6, c0, 0 @ DFAR - mcr p15, 0, r11, c6, c0, 2 @ IFAR - mcr p15, 0, r12, c12, c0, 0 @ VBAR - - .if \read_from_vcpu == 0 - pop {r2-r12} - .else - ldr r2, [vcpu, #CP15_OFFSET(c1_SCTLR)] - ldr r3, [vcpu, #CP15_OFFSET(c1_CPACR)] - ldr r4, [vcpu, #CP15_OFFSET(c2_TTBCR)] - ldr r5, [vcpu, #CP15_OFFSET(c3_DACR)] - add r12, vcpu, #CP15_OFFSET(c2_TTBR0) - ldrd r6, r7, [r12] - add r12, vcpu, #CP15_OFFSET(c2_TTBR1) - ldrd r8, r9, [r12] - ldr r10, [vcpu, #CP15_OFFSET(c10_PRRR)] - ldr r11, [vcpu, #CP15_OFFSET(c10_NMRR)] - ldr r12, [vcpu, #CP15_OFFSET(c0_CSSELR)] - .endif - - mcr p15, 0, r2, c1, c0, 0 @ SCTLR - mcr p15, 0, r3, c1, c0, 2 @ CPACR - mcr p15, 0, r4, c2, c0, 2 @ TTBCR - mcr p15, 0, r5, c3, c0, 0 @ DACR - mcrr p15, 0, r6, r7, c2 @ TTBR 0 - mcrr p15, 1, r8, r9, c2 @ TTBR 1 - mcr p15, 0, r10, c10, c2, 0 @ PRRR - mcr p15, 0, r11, c10, c2, 1 @ NMRR - mcr p15, 2, r12, c0, c0, 0 @ CSSELR -.endm - -/* - * Save the VGIC CPU state into memory - * - * Assumes vcpu pointer in vcpu reg - */ -.macro save_vgic_state - /* Get VGIC VCTRL base into r2 */ - ldr r2, [vcpu, #VCPU_KVM] - ldr r2, [r2, #KVM_VGIC_VCTRL] - cmp r2, #0 - beq 2f - - /* Compute the address of struct vgic_cpu */ - add r11, vcpu, #VCPU_VGIC_CPU - - /* Save all interesting registers */ - ldr r4, [r2, #GICH_VMCR] - ldr r5, [r2, #GICH_MISR] - ldr r6, [r2, #GICH_EISR0] - ldr r7, [r2, #GICH_EISR1] - ldr r8, [r2, #GICH_ELRSR0] - ldr r9, [r2, #GICH_ELRSR1] - ldr r10, [r2, #GICH_APR] -ARM_BE8(rev r4, r4 ) -ARM_BE8(rev r5, r5 ) -ARM_BE8(rev r6, r6 ) -ARM_BE8(rev r7, r7 ) -ARM_BE8(rev r8, r8 ) -ARM_BE8(rev r9, r9 ) -ARM_BE8(rev r10, r10 ) - - str r4, [r11, #VGIC_V2_CPU_VMCR] - str r5, [r11, #VGIC_V2_CPU_MISR] -#ifdef CONFIG_CPU_ENDIAN_BE8 - str r6, [r11, #(VGIC_V2_CPU_EISR + 4)] - str r7, [r11, #VGIC_V2_CPU_EISR] - str r8, [r11, #(VGIC_V2_CPU_ELRSR + 4)] - str r9, [r11, #VGIC_V2_CPU_ELRSR] -#else - str r6, [r11, #VGIC_V2_CPU_EISR] - str r7, [r11, #(VGIC_V2_CPU_EISR + 4)] - str r8, [r11, #VGIC_V2_CPU_ELRSR] - str r9, [r11, #(VGIC_V2_CPU_ELRSR + 4)] -#endif - str r10, [r11, #VGIC_V2_CPU_APR] - - /* Clear GICH_HCR */ - mov r5, #0 - str r5, [r2, #GICH_HCR] - - /* Save list registers */ - add r2, r2, #GICH_LR0 - add r3, r11, #VGIC_V2_CPU_LR - ldr r4, [r11, #VGIC_CPU_NR_LR] -1: ldr r6, [r2], #4 -ARM_BE8(rev r6, r6 ) - str r6, [r3], #4 - subs r4, r4, #1 - bne 1b -2: -.endm - -/* - * Restore the VGIC CPU state from memory - * - * Assumes vcpu pointer in vcpu reg - */ -.macro restore_vgic_state - /* Get VGIC VCTRL base into r2 */ - ldr r2, [vcpu, #VCPU_KVM] - ldr r2, [r2, #KVM_VGIC_VCTRL] - cmp r2, #0 - beq 2f - - /* Compute the address of struct vgic_cpu */ - add r11, vcpu, #VCPU_VGIC_CPU - - /* We only restore a minimal set of registers */ - ldr r3, [r11, #VGIC_V2_CPU_HCR] - ldr r4, [r11, #VGIC_V2_CPU_VMCR] - ldr r8, [r11, #VGIC_V2_CPU_APR] -ARM_BE8(rev r3, r3 ) -ARM_BE8(rev r4, r4 ) -ARM_BE8(rev r8, r8 ) - - str r3, [r2, #GICH_HCR] - str r4, [r2, #GICH_VMCR] - str r8, [r2, #GICH_APR] - - /* Restore list registers */ - add r2, r2, #GICH_LR0 - add r3, r11, #VGIC_V2_CPU_LR - ldr r4, [r11, #VGIC_CPU_NR_LR] -1: ldr r6, [r3], #4 -ARM_BE8(rev r6, r6 ) - str r6, [r2], #4 - subs r4, r4, #1 - bne 1b -2: -.endm - -#define CNTHCTL_PL1PCTEN (1 << 0) -#define CNTHCTL_PL1PCEN (1 << 1) - -/* - * Save the timer state onto the VCPU and allow physical timer/counter access - * for the host. - * - * Assumes vcpu pointer in vcpu reg - * Clobbers r2-r5 - */ -.macro save_timer_state - ldr r4, [vcpu, #VCPU_KVM] - ldr r2, [r4, #KVM_TIMER_ENABLED] - cmp r2, #0 - beq 1f - - mrc p15, 0, r2, c14, c3, 1 @ CNTV_CTL - str r2, [vcpu, #VCPU_TIMER_CNTV_CTL] - - isb - - mrrc p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL - ldr r4, =VCPU_TIMER_CNTV_CVAL - add r5, vcpu, r4 - strd r2, r3, [r5] - - @ Ensure host CNTVCT == CNTPCT - mov r2, #0 - mcrr p15, 4, r2, r2, c14 @ CNTVOFF - -1: - mov r2, #0 @ Clear ENABLE - mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL - - @ Allow physical timer/counter access for the host - mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL - orr r2, r2, #(CNTHCTL_PL1PCEN | CNTHCTL_PL1PCTEN) - mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL -.endm - -/* - * Load the timer state from the VCPU and deny physical timer/counter access - * for the host. - * - * Assumes vcpu pointer in vcpu reg - * Clobbers r2-r5 - */ -.macro restore_timer_state - @ Disallow physical timer access for the guest - @ Physical counter access is allowed - mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL - orr r2, r2, #CNTHCTL_PL1PCTEN - bic r2, r2, #CNTHCTL_PL1PCEN - mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL - - ldr r4, [vcpu, #VCPU_KVM] - ldr r2, [r4, #KVM_TIMER_ENABLED] - cmp r2, #0 - beq 1f - - ldr r2, [r4, #KVM_TIMER_CNTVOFF] - ldr r3, [r4, #(KVM_TIMER_CNTVOFF + 4)] - mcrr p15, 4, rr_lo_hi(r2, r3), c14 @ CNTVOFF - - ldr r4, =VCPU_TIMER_CNTV_CVAL - add r5, vcpu, r4 - ldrd r2, r3, [r5] - mcrr p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL - isb - - ldr r2, [vcpu, #VCPU_TIMER_CNTV_CTL] - and r2, r2, #3 - mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL -1: -.endm - -.equ vmentry, 0 -.equ vmexit, 1 - -/* Configures the HSTR (Hyp System Trap Register) on entry/return - * (hardware reset value is 0) */ -.macro set_hstr operation - mrc p15, 4, r2, c1, c1, 3 - ldr r3, =HSTR_T(15) - .if \operation == vmentry - orr r2, r2, r3 @ Trap CR{15} - .else - bic r2, r2, r3 @ Don't trap any CRx accesses - .endif - mcr p15, 4, r2, c1, c1, 3 -.endm - -/* Configures the HCPTR (Hyp Coprocessor Trap Register) on entry/return - * (hardware reset value is 0). Keep previous value in r2. - * An ISB is emited on vmexit/vmtrap, but executed on vmexit only if - * VFP wasn't already enabled (always executed on vmtrap). - * If a label is specified with vmexit, it is branched to if VFP wasn't - * enabled. - */ -.macro set_hcptr operation, mask, label = none - mrc p15, 4, r2, c1, c1, 2 - ldr r3, =\mask - .if \operation == vmentry - orr r3, r2, r3 @ Trap coproc-accesses defined in mask - .else - bic r3, r2, r3 @ Don't trap defined coproc-accesses - .endif - mcr p15, 4, r3, c1, c1, 2 - .if \operation != vmentry - .if \operation == vmexit - tst r2, #(HCPTR_TCP(10) | HCPTR_TCP(11)) - beq 1f - .endif - isb - .if \label != none - b \label - .endif -1: - .endif -.endm - -/* Configures the HDCR (Hyp Debug Configuration Register) on entry/return - * (hardware reset value is 0) */ -.macro set_hdcr operation - mrc p15, 4, r2, c1, c1, 1 - ldr r3, =(HDCR_TPM|HDCR_TPMCR) - .if \operation == vmentry - orr r2, r2, r3 @ Trap some perfmon accesses - .else - bic r2, r2, r3 @ Don't trap any perfmon accesses - .endif - mcr p15, 4, r2, c1, c1, 1 -.endm - -/* Enable/Disable: stage-2 trans., trap interrupts, trap wfi, trap smc */ -.macro configure_hyp_role operation - .if \operation == vmentry - ldr r2, [vcpu, #VCPU_HCR] - ldr r3, [vcpu, #VCPU_IRQ_LINES] - orr r2, r2, r3 - .else - mov r2, #0 - .endif - mcr p15, 4, r2, c1, c1, 0 @ HCR -.endm - -.macro load_vcpu - mrc p15, 4, vcpu, c13, c0, 2 @ HTPIDR -.endm