From: Santosh Shilimkar Date: Thu, 26 Sep 2013 01:18:13 +0000 (-0400) Subject: clk: keystone: add Keystone PLL clock driver X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=b9e0d40c0d83805bc6feb86d602e73f2cdcb17f9;p=linux-beck.git clk: keystone: add Keystone PLL clock driver Add the driver for the PLL IPs found on Keystone 2 devices. The PLL IP typically has a multiplier, a divider and a post-divider. The PLL IPs like ARMPLL, DDRPLL and PAPLL are controlled by the memory mapped register where as the Main PLL is controlled by a PLL controller and memory map registers. Signed-off-by: Santosh Shilimkar Signed-off-by: Mike Turquette --- diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt new file mode 100644 index 000000000000..12bd72605a31 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt @@ -0,0 +1,84 @@ +Status: Unstable - ABI compatibility may be broken in the future + +Binding for keystone PLLs. The main PLL IP typically has a multiplier, +a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL +and PAPLL are controlled by the memory mapped register where as the Main +PLL is controlled by a PLL controller registers along with memory mapped +registers. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- #clock-cells : from common clock binding; shall be set to 0. +- compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock" +- clocks : parent clock phandle +- reg - pll control0 and pll multipler registers +- reg-names : control and multiplier. The multiplier is applicable only for + main pll clock +- fixed-postdiv : fixed post divider value + +Example: + mainpllclk: mainpllclk@2310110 { + #clock-cells = <0>; + compatible = "ti,keystone,main-pll-clock"; + clocks = <&refclkmain>; + reg = <0x02620350 4>, <0x02310110 4>; + reg-names = "control", "multiplier"; + fixed-postdiv = <2>; + }; + + papllclk: papllclk@2620358 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-clock"; + clocks = <&refclkmain>; + clock-output-names = "pa-pll-clk"; + reg = <0x02620358 4>; + reg-names = "control"; + fixed-postdiv = <6>; + }; + +Required properties: +- #clock-cells : from common clock binding; shall be set to 0. +- compatible : shall be "ti,keystone,pll-mux-clock" +- clocks : link phandles of parent clocks +- reg - pll mux register +- bit-shift : number of bits to shift the bit-mask +- bit-mask : arbitrary bitmask for programming the mux + +Optional properties: +- clock-output-names : From common clock binding. + +Example: + mainmuxclk: mainmuxclk@2310108 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-mux-clock"; + clocks = <&mainpllclk>, <&refclkmain>; + reg = <0x02310108 4>; + bit-shift = <23>; + bit-mask = <1>; + clock-output-names = "mainmuxclk"; + }; + +Required properties: +- #clock-cells : from common clock binding; shall be set to 0. +- compatible : shall be "ti,keystone,pll-divider-clock" +- clocks : parent clock phandle +- reg - pll mux register +- bit-shift : number of bits to shift the bit-mask +- bit-mask : arbitrary bitmask for programming the divider + +Optional properties: +- clock-output-names : From common clock binding. + +Example: + gemtraceclk: gemtraceclk@2310120 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-divider-clock"; + clocks = <&mainmuxclk>; + reg = <0x02310120 4>; + bit-shift = <0>; + bit-mask = <8>; + clock-output-names = "gemtraceclk"; + }; diff --git a/drivers/clk/keystone/pll.c b/drivers/clk/keystone/pll.c new file mode 100644 index 000000000000..47a1bd9f1726 --- /dev/null +++ b/drivers/clk/keystone/pll.c @@ -0,0 +1,305 @@ +/* + * PLL clock driver for Keystone devices + * + * Copyright (C) 2013 Texas Instruments Inc. + * Murali Karicheri + * Santosh Shilimkar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define PLLM_LOW_MASK 0x3f +#define PLLM_HIGH_MASK 0x7ffc0 +#define MAIN_PLLM_HIGH_MASK 0x7f000 +#define PLLM_HIGH_SHIFT 6 +#define PLLD_MASK 0x3f + +/** + * struct clk_pll_data - pll data structure + * @has_pllctrl: If set to non zero, lower 6 bits of multiplier is in pllm + * register of pll controller, else it is in the pll_ctrl0((bit 11-6) + * @phy_pllm: Physical address of PLLM in pll controller. Used when + * has_pllctrl is non zero. + * @phy_pll_ctl0: Physical address of PLL ctrl0. This could be that of + * Main PLL or any other PLLs in the device such as ARM PLL, DDR PLL + * or PA PLL available on keystone2. These PLLs are controlled by + * this register. Main PLL is controlled by a PLL controller. + * @pllm: PLL register map address + * @pll_ctl0: PLL controller map address + * @pllm_lower_mask: multiplier lower mask + * @pllm_upper_mask: multiplier upper mask + * @pllm_upper_shift: multiplier upper shift + * @plld_mask: divider mask + * @postdiv: Post divider + */ +struct clk_pll_data { + bool has_pllctrl; + u32 phy_pllm; + u32 phy_pll_ctl0; + void __iomem *pllm; + void __iomem *pll_ctl0; + u32 pllm_lower_mask; + u32 pllm_upper_mask; + u32 pllm_upper_shift; + u32 plld_mask; + u32 postdiv; +}; + +/** + * struct clk_pll - Main pll clock + * @hw: clk_hw for the pll + * @pll_data: PLL driver specific data + */ +struct clk_pll { + struct clk_hw hw; + struct clk_pll_data *pll_data; +}; + +#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw) + +static unsigned long clk_pllclk_recalc(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + struct clk_pll_data *pll_data = pll->pll_data; + unsigned long rate = parent_rate; + u32 mult = 0, prediv, postdiv, val; + + /* + * get bits 0-5 of multiplier from pllctrl PLLM register + * if has_pllctrl is non zero + */ + if (pll_data->has_pllctrl) { + val = readl(pll_data->pllm); + mult = (val & pll_data->pllm_lower_mask); + } + + /* bit6-12 of PLLM is in Main PLL control register */ + val = readl(pll_data->pll_ctl0); + mult |= ((val & pll_data->pllm_upper_mask) + >> pll_data->pllm_upper_shift); + prediv = (val & pll_data->plld_mask); + postdiv = pll_data->postdiv; + + rate /= (prediv + 1); + rate = (rate * (mult + 1)); + rate /= postdiv; + + return rate; +} + +static const struct clk_ops clk_pll_ops = { + .recalc_rate = clk_pllclk_recalc, +}; + +static struct clk *clk_register_pll(struct device *dev, + const char *name, + const char *parent_name, + struct clk_pll_data *pll_data) +{ + struct clk_init_data init; + struct clk_pll *pll; + struct clk *clk; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &clk_pll_ops; + init.flags = 0; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + + pll->pll_data = pll_data; + pll->hw.init = &init; + + clk = clk_register(NULL, &pll->hw); + if (IS_ERR(clk)) + goto out; + + return clk; +out: + kfree(pll); + return NULL; +} + +/** + * _of_clk_init - PLL initialisation via DT + * @node: device tree node for this clock + * @pllctrl: If true, lower 6 bits of multiplier is in pllm register of + * pll controller, else it is in the control regsiter0(bit 11-6) + */ +static void __init _of_pll_clk_init(struct device_node *node, bool pllctrl) +{ + struct clk_pll_data *pll_data; + const char *parent_name; + struct clk *clk; + int i; + + pll_data = kzalloc(sizeof(*pll_data), GFP_KERNEL); + if (!pll_data) { + pr_err("%s: Out of memory\n", __func__); + return; + } + + parent_name = of_clk_get_parent_name(node, 0); + if (of_property_read_u32(node, "fixed-postdiv", &pll_data->postdiv)) + goto out; + + i = of_property_match_string(node, "reg-names", "control"); + pll_data->pll_ctl0 = of_iomap(node, i); + if (!pll_data->pll_ctl0) { + pr_err("%s: ioremap failed\n", __func__); + goto out; + } + + pll_data->pllm_lower_mask = PLLM_LOW_MASK; + pll_data->pllm_upper_shift = PLLM_HIGH_SHIFT; + pll_data->plld_mask = PLLD_MASK; + pll_data->has_pllctrl = pllctrl; + if (!pll_data->has_pllctrl) { + pll_data->pllm_upper_mask = PLLM_HIGH_MASK; + } else { + pll_data->pllm_upper_mask = MAIN_PLLM_HIGH_MASK; + i = of_property_match_string(node, "reg-names", "multiplier"); + pll_data->pllm = of_iomap(node, i); + if (!pll_data->pllm) { + iounmap(pll_data->pll_ctl0); + goto out; + } + } + + clk = clk_register_pll(NULL, node->name, parent_name, pll_data); + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + return; + } + +out: + pr_err("%s: error initializing pll %s\n", __func__, node->name); + kfree(pll_data); +} + +/** + * of_keystone_pll_clk_init - PLL initialisation DT wrapper + * @node: device tree node for this clock + */ +static void __init of_keystone_pll_clk_init(struct device_node *node) +{ + _of_pll_clk_init(node, false); +} +CLK_OF_DECLARE(keystone_pll_clock, "ti,keystone,pll-clock", + of_keystone_pll_clk_init); + +/** + * of_keystone_pll_main_clk_init - Main PLL initialisation DT wrapper + * @node: device tree node for this clock + */ +static void __init of_keystone_main_pll_clk_init(struct device_node *node) +{ + _of_pll_clk_init(node, true); +} +CLK_OF_DECLARE(keystone_main_pll_clock, "ti,keystone,main-pll-clock", + of_keystone_main_pll_clk_init); + +/** + * of_pll_div_clk_init - PLL divider setup function + * @node: device tree node for this clock + */ +static void __init of_pll_div_clk_init(struct device_node *node) +{ + const char *parent_name; + void __iomem *reg; + u32 shift, mask; + struct clk *clk; + const char *clk_name = node->name; + + of_property_read_string(node, "clock-output-names", &clk_name); + reg = of_iomap(node, 0); + if (!reg) { + pr_err("%s: ioremap failed\n", __func__); + return; + } + + parent_name = of_clk_get_parent_name(node, 0); + if (!parent_name) { + pr_err("%s: missing parent clock\n", __func__); + return; + } + + if (of_property_read_u32(node, "bit-shift", &shift)) { + pr_err("%s: missing 'shift' property\n", __func__); + return; + } + + if (of_property_read_u32(node, "bit-mask", &mask)) { + pr_err("%s: missing 'bit-mask' property\n", __func__); + return; + } + + clk = clk_register_divider(NULL, clk_name, parent_name, 0, reg, shift, + mask, 0, NULL); + if (clk) + of_clk_add_provider(node, of_clk_src_simple_get, clk); + else + pr_err("%s: error registering divider %s\n", __func__, clk_name); +} +CLK_OF_DECLARE(pll_divider_clock, "ti,keystone,pll-divider-clock", of_pll_div_clk_init); + +/** + * of_pll_mux_clk_init - PLL mux setup function + * @node: device tree node for this clock + */ +static void __init of_pll_mux_clk_init(struct device_node *node) +{ + void __iomem *reg; + u32 shift, mask; + struct clk *clk; + const char *parents[2]; + const char *clk_name = node->name; + + of_property_read_string(node, "clock-output-names", &clk_name); + reg = of_iomap(node, 0); + if (!reg) { + pr_err("%s: ioremap failed\n", __func__); + return; + } + + parents[0] = of_clk_get_parent_name(node, 0); + parents[1] = of_clk_get_parent_name(node, 1); + if (!parents[0] || !parents[1]) { + pr_err("%s: missing parent clocks\n", __func__); + return; + } + + if (of_property_read_u32(node, "bit-shift", &shift)) { + pr_err("%s: missing 'shift' property\n", __func__); + return; + } + + if (of_property_read_u32(node, "bit-mask", &mask)) { + pr_err("%s: missing 'bit-mask' property\n", __func__); + return; + } + + clk = clk_register_mux(NULL, clk_name, (const char **)&parents, + ARRAY_SIZE(parents) , 0, reg, shift, mask, + 0, NULL); + if (clk) + of_clk_add_provider(node, of_clk_src_simple_get, clk); + else + pr_err("%s: error registering mux %s\n", __func__, clk_name); +} +CLK_OF_DECLARE(pll_mux_clock, "ti,keystone,pll-mux-clock", of_pll_mux_clk_init);