From: Juha Lumme Date: Wed, 26 Dec 2012 05:48:51 +0000 (+0900) Subject: mxs/spi: clear XFER_COUNT in ctrl0 field in DMA descriptor X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ba486a2a29b629413f89e0490edb02a8ccc3bb8f;p=linux-beck.git mxs/spi: clear XFER_COUNT in ctrl0 field in DMA descriptor On MX23 the XFER_COUNT part in ctrl0 field in DMA descriptor was improperly OR'd during the construction of DMA descriptor chain, instead of being freshly set. Because of that too many bytes were being expected from SPI during the last DMA cycle. This caused a timeout (SSP_TIMEOUT) to happen in the processing of the last DMA descriptor, and thus reads and writes were failing. This is a fix for the problem, by clearing XFER_COUNT bytes in ctrl0 before setting the new XFER_COUNT for DMA descriptor. Signed-off-by: Juha Lumme Acked-by: Marek Vasut Signed-off-by: Grant Likely --- diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index a3ede249d05d..e3d8b3197d22 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -241,6 +241,7 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs, INIT_COMPLETION(spi->c); ctrl0 = readl(ssp->base + HW_SSP_CTRL0); + ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT; ctrl0 |= BM_SSP_CTRL0_DATA_XFER | mxs_spi_cs_to_reg(cs); if (*first) @@ -256,8 +257,10 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs, if ((sg_count + 1 == sgs) && *last) ctrl0 |= BM_SSP_CTRL0_IGNORE_CRC; - if (ssp->devid == IMX23_SSP) + if (ssp->devid == IMX23_SSP) { + ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT; ctrl0 |= min; + } dma_xfer[sg_count].pio[0] = ctrl0; dma_xfer[sg_count].pio[3] = min;