From: Don Brace Date: Wed, 27 Apr 2016 22:14:17 +0000 (-0500) Subject: hpsa: correct handling of HBA device removal X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ba74fdc411b84064d7abe4b10d0708f6dad03eb2;p=linux-beck.git hpsa: correct handling of HBA device removal Need to report HBA device removal faster than the event handler polling interval. Stop I/O to the removed disk and wait for all I/O operations to flush before removing the device. Reviewed-by: Scott Teel Reviewed-by: Kevin Barnett Signed-off-by: Don Brace Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 4f8e3285baa9..034624f1ca64 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -294,6 +294,9 @@ static void hpsa_disable_rld_caching(struct ctlr_info *h); static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h, struct ReportExtendedLUNdata *buf, int bufsize); static int hpsa_luns_changed(struct ctlr_info *h); +static bool hpsa_cmd_dev_match(struct ctlr_info *h, struct CommandList *c, + struct hpsa_scsi_dev_t *dev, + unsigned char *scsi3addr); static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) { @@ -1745,6 +1748,51 @@ static int hpsa_add_device(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) return rc; } +static int hpsa_find_outstanding_commands_for_dev(struct ctlr_info *h, + struct hpsa_scsi_dev_t *dev) +{ + int i; + int count = 0; + + for (i = 0; i < h->nr_cmds; i++) { + struct CommandList *c = h->cmd_pool + i; + int refcount = atomic_inc_return(&c->refcount); + + if (refcount > 1 && hpsa_cmd_dev_match(h, c, dev, + dev->scsi3addr)) { + unsigned long flags; + + spin_lock_irqsave(&h->lock, flags); /* Implied MB */ + if (!hpsa_is_cmd_idle(c)) + ++count; + spin_unlock_irqrestore(&h->lock, flags); + } + + cmd_free(h, c); + } + + return count; +} + +static void hpsa_wait_for_outstanding_commands_for_dev(struct ctlr_info *h, + struct hpsa_scsi_dev_t *device) +{ + int cmds = 0; + int waits = 0; + + while (1) { + cmds = hpsa_find_outstanding_commands_for_dev(h, device); + if (cmds == 0) + break; + if (++waits > 20) + break; + dev_warn(&h->pdev->dev, + "%s: removing device with %d outstanding commands!\n", + __func__, cmds); + msleep(1000); + } +} + static void hpsa_remove_device(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) { @@ -1768,8 +1816,13 @@ static void hpsa_remove_device(struct ctlr_info *h, hpsa_show_dev_msg(KERN_WARNING, h, device, "didn't find device for removal."); } - } else /* HBA */ + } else { /* HBA */ + + device->removed = 1; + hpsa_wait_for_outstanding_commands_for_dev(h, device); + hpsa_remove_sas_device(device); + } } static void adjust_hpsa_scsi_table(struct ctlr_info *h, @@ -2171,7 +2224,8 @@ static void hpsa_unmap_sg_chain_block(struct ctlr_info *h, static int handle_ioaccel_mode2_error(struct ctlr_info *h, struct CommandList *c, struct scsi_cmnd *cmd, - struct io_accel2_cmd *c2) + struct io_accel2_cmd *c2, + struct hpsa_scsi_dev_t *dev) { int data_len; int retry = 0; @@ -2235,8 +2289,27 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h, case IOACCEL2_STATUS_SR_NO_PATH_TO_DEVICE: case IOACCEL2_STATUS_SR_INVALID_DEVICE: case IOACCEL2_STATUS_SR_IOACCEL_DISABLED: - /* We will get an event from ctlr to trigger rescan */ - retry = 1; + /* + * Did an HBA disk disappear? We will eventually + * get a state change event from the controller but + * in the meantime, we need to tell the OS that the + * HBA disk is no longer there and stop I/O + * from going down. This allows the potential re-insert + * of the disk to get the same device node. + */ + if (dev->physical_device && dev->expose_device) { + cmd->result = DID_NO_CONNECT << 16; + dev->removed = 1; + h->drv_req_rescan = 1; + dev_warn(&h->pdev->dev, + "%s: device is gone!\n", __func__); + } else + /* + * Retry by sending down the RAID path. + * We will get an event from ctlr to + * trigger rescan regardless. + */ + retry = 1; break; default: retry = 1; @@ -2368,7 +2441,7 @@ static void process_ioaccel2_completion(struct ctlr_info *h, return hpsa_retry_cmd(h, c); } - if (handle_ioaccel_mode2_error(h, c, cmd, c2)) + if (handle_ioaccel_mode2_error(h, c, cmd, c2, dev)) return hpsa_retry_cmd(h, c); return hpsa_cmd_free_and_done(h, c, cmd); @@ -5263,6 +5336,12 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) dev = cmd->device->hostdata; if (!dev) { + cmd->result = NOT_READY << 16; /* host byte */ + cmd->scsi_done(cmd); + return 0; + } + + if (dev->removed) { cmd->result = DID_NO_CONNECT << 16; cmd->scsi_done(cmd); return 0; diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index d06bb7417e36..a1487e67f7a1 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -63,6 +63,7 @@ struct hpsa_scsi_dev_t { unsigned char scsi3addr[8]; /* as presented to the HW */ u8 physical_device : 1; u8 expose_device; + u8 removed : 1; /* device is marked for death */ #define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0" unsigned char device_id[16]; /* from inquiry pg. 0x83 */ u64 sas_address;