From: nagalakshmi.nandigama@lsi.com Date: Thu, 1 Dec 2011 02:21:55 +0000 (+0530) Subject: [SCSI] mpt2sas: Support for greater than 2TB capacity WarpDrive X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ba96bd0b1d4a4e11f23671e1f375a5c8f46b0fe7;p=linux-beck.git [SCSI] mpt2sas: Support for greater than 2TB capacity WarpDrive The driver is modified to allow access to the greater than 2TB WarpDrive and properly handle direct-io mapping for WarpDrive volumes greater than 2TB. Signed-off-by: Nagalakshmi Nandigama Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index b3b03bb8ab50..88ead5ed2afc 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -374,6 +374,7 @@ struct _sas_device { * @percent_complete: resync percent complete * @direct_io_enabled: Whether direct io to PDs are allowed or not * @stripe_exponent: X where 2powX is the stripe sz in blocks + * @block_exponent: X where 2powX is the block sz in bytes * @max_lba: Maximum number of LBA in the volume * @stripe_sz: Stripe Size of the volume * @device_info: Device info of the volume member disk @@ -395,6 +396,7 @@ struct _raid_device { u8 percent_complete; u8 direct_io_enabled; u8 stripe_exponent; + u8 block_exponent; u64 max_lba; u32 stripe_sz; u32 device_info; diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index a9efc4551086..ba8171fe17ef 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -1780,11 +1780,9 @@ _scsih_init_warpdrive_properties(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t mpi_reply; u16 sz; u8 num_pds, count; - u64 mb = 1024 * 1024; - u64 tb_2 = 2 * mb * mb; - u64 capacity; - u32 stripe_sz; - u8 i, stripe_exp; + unsigned long stripe_sz, block_sz; + u8 stripe_exp, block_exp; + u64 dev_max_lba; if (!ioc->is_warpdrive) return; @@ -1848,51 +1846,57 @@ _scsih_init_warpdrive_properties(struct MPT2SAS_ADAPTER *ioc, vol_pg0->PhysDisk[count].PhysDiskNum); goto out_error; } + /* Disable direct I/O if member drive lba exceeds 4 bytes */ + dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA); + if (dev_max_lba >> 32) { + printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is " + "disabled for the drive with handle(0x%04x) member" + "handle (0x%04x) unsupported max lba 0x%016llx\n", + ioc->name, raid_device->handle, + le16_to_cpu(pd_pg0.DevHandle), + (unsigned long long)dev_max_lba); + goto out_error; + } + raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle); } /* * Assumption for WD: Direct I/O is not supported if the volume is - * not RAID0, if the stripe size is not 64KB, if the block size is - * not 512 and if the volume size is >2TB + * not RAID0 */ - if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0 || - le16_to_cpu(vol_pg0->BlockSize) != 512) { + if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) { printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " "for the drive with handle(0x%04x): type=%d, " "s_sz=%uK, blk_size=%u\n", ioc->name, raid_device->handle, raid_device->volume_type, - le32_to_cpu(vol_pg0->StripeSize)/2, + (le32_to_cpu(vol_pg0->StripeSize) * + le16_to_cpu(vol_pg0->BlockSize)) / 1024, le16_to_cpu(vol_pg0->BlockSize)); goto out_error; } - capacity = (u64) le16_to_cpu(vol_pg0->BlockSize) * - (le64_to_cpu(vol_pg0->MaxLBA) + 1); - - if (capacity > tb_2) { + stripe_sz = le32_to_cpu(vol_pg0->StripeSize); + stripe_exp = find_first_bit(&stripe_sz, 32); + if (stripe_exp == 32) { printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " - "for the drive with handle(0x%04x) since drive sz > 2TB\n", - ioc->name, raid_device->handle); + "for the drive with handle(0x%04x) invalid stripe sz %uK\n", + ioc->name, raid_device->handle, + (le32_to_cpu(vol_pg0->StripeSize) * + le16_to_cpu(vol_pg0->BlockSize)) / 1024); goto out_error; } - - stripe_sz = le32_to_cpu(vol_pg0->StripeSize); - stripe_exp = 0; - for (i = 0; i < 32; i++) { - if (stripe_sz & 1) - break; - stripe_exp++; - stripe_sz >>= 1; - } - if (i == 32) { + raid_device->stripe_exponent = stripe_exp; + block_sz = le16_to_cpu(vol_pg0->BlockSize); + block_exp = find_first_bit(&block_sz, 16); + if (block_exp == 16) { printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " - "for the drive with handle(0x%04x) invalid stripe sz %uK\n", + "for the drive with handle(0x%04x) invalid block sz %u\n", ioc->name, raid_device->handle, - le32_to_cpu(vol_pg0->StripeSize)/2); + le16_to_cpu(vol_pg0->BlockSize)); goto out_error; } - raid_device->stripe_exponent = stripe_exp; + raid_device->block_exponent = block_exp; raid_device->direct_io_enabled = 1; printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is Enabled for the drive" @@ -3808,8 +3812,9 @@ _scsih_setup_direct_io(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, { u32 v_lba, p_lba, stripe_off, stripe_unit, column, io_size; u32 stripe_sz, stripe_exp; - u8 num_pds, *cdb_ptr, *tmp_ptr, *lba_ptr1, *lba_ptr2; + u8 num_pds, *cdb_ptr, i; u8 cdb0 = scmd->cmnd[0]; + u64 v_llba; /* * Try Direct I/O to RAID memeber disks @@ -3820,15 +3825,11 @@ _scsih_setup_direct_io(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, if ((cdb0 < READ_16) || !(cdb_ptr[2] | cdb_ptr[3] | cdb_ptr[4] | cdb_ptr[5])) { - io_size = scsi_bufflen(scmd) >> 9; + io_size = scsi_bufflen(scmd) >> + raid_device->block_exponent; + i = (cdb0 < READ_16) ? 2 : 6; /* get virtual lba */ - lba_ptr1 = lba_ptr2 = (cdb0 < READ_16) ? &cdb_ptr[2] : - &cdb_ptr[6]; - tmp_ptr = (u8 *)&v_lba + 3; - *tmp_ptr-- = *lba_ptr1++; - *tmp_ptr-- = *lba_ptr1++; - *tmp_ptr-- = *lba_ptr1++; - *tmp_ptr = *lba_ptr1; + v_lba = be32_to_cpu(*(__be32 *)(&cdb_ptr[i])); if (((u64)v_lba + (u64)io_size - 1) <= (u32)raid_device->max_lba) { @@ -3847,11 +3848,39 @@ _scsih_setup_direct_io(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, mpi_request->DevHandle = cpu_to_le16(raid_device-> pd_handle[column]); - tmp_ptr = (u8 *)&p_lba + 3; - *lba_ptr2++ = *tmp_ptr--; - *lba_ptr2++ = *tmp_ptr--; - *lba_ptr2++ = *tmp_ptr--; - *lba_ptr2 = *tmp_ptr; + (*(__be32 *)(&cdb_ptr[i])) = + cpu_to_be32(p_lba); + /* + * WD: To indicate this I/O is directI/O + */ + _scsih_scsi_direct_io_set(ioc, smid, 1); + } + } + } else { + io_size = scsi_bufflen(scmd) >> + raid_device->block_exponent; + /* get virtual lba */ + v_llba = be64_to_cpu(*(__be64 *)(&cdb_ptr[2])); + + if ((v_llba + (u64)io_size - 1) <= + raid_device->max_lba) { + stripe_sz = raid_device->stripe_sz; + stripe_exp = raid_device->stripe_exponent; + stripe_off = (u32) (v_llba & (stripe_sz - 1)); + + /* Check whether IO falls within a stripe */ + if ((stripe_off + io_size) <= stripe_sz) { + num_pds = raid_device->num_pds; + p_lba = (u32)(v_llba >> stripe_exp); + stripe_unit = p_lba / num_pds; + column = p_lba % num_pds; + p_lba = (stripe_unit << stripe_exp) + + stripe_off; + mpi_request->DevHandle = + cpu_to_le16(raid_device-> + pd_handle[column]); + (*(__be64 *)(&cdb_ptr[2])) = + cpu_to_be64((u64)p_lba); /* * WD: To indicate this I/O is directI/O */