From: Zeng Zhaoming Date: Wed, 18 Jan 2012 05:58:07 +0000 (+0800) Subject: ASoC: sgtl5000: Fix wrong register name in restore X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=bb362e2e4f4874f3fd4cbc2497385b9bceb3a08a;p=linux-beck.git ASoC: sgtl5000: Fix wrong register name in restore Correct SGTL5000_CHIP_CLK_CTRL to SGTL5000_CHIP_REF_CTRL in sgtl5000_restore_regs(), and add comment to explain the restore order. Reported-by: Julia Lawall Signed-off-by: Zeng Zhaoming Acked-by: Dong Aisheng Signed-off-by: Mark Brown --- diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index f8863ebb4304..7f4ba819a9f6 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -987,12 +987,12 @@ static int sgtl5000_restore_regs(struct snd_soc_codec *codec) /* restore regular registers */ for (reg = 0; reg <= SGTL5000_CHIP_SHORT_CTRL; reg += 2) { - /* this regs depends on the others */ + /* These regs should restore in particular order */ if (reg == SGTL5000_CHIP_ANA_POWER || reg == SGTL5000_CHIP_CLK_CTRL || reg == SGTL5000_CHIP_LINREG_CTRL || reg == SGTL5000_CHIP_LINE_OUT_CTRL || - reg == SGTL5000_CHIP_CLK_CTRL) + reg == SGTL5000_CHIP_REF_CTRL) continue; snd_soc_write(codec, reg, cache[reg]); @@ -1003,8 +1003,17 @@ static int sgtl5000_restore_regs(struct snd_soc_codec *codec) snd_soc_write(codec, reg, cache[reg]); /* - * restore power and other regs according - * to set_power() and set_clock() + * restore these regs according to the power setting sequence in + * sgtl5000_set_power_regs() and clock setting sequence in + * sgtl5000_set_clock(). + * + * The order of restore is: + * 1. SGTL5000_CHIP_CLK_CTRL MCLK_FREQ bits (1:0) should be restore after + * SGTL5000_CHIP_ANA_POWER PLL bits set + * 2. SGTL5000_CHIP_LINREG_CTRL should be set before + * SGTL5000_CHIP_ANA_POWER LINREG_D restored + * 3. SGTL5000_CHIP_REF_CTRL controls Analog Ground Voltage, + * prefer to resotre it after SGTL5000_CHIP_ANA_POWER restored */ snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, cache[SGTL5000_CHIP_LINREG_CTRL]);