From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 4 Jan 2017 00:34:48 +0000 (-0800)
Subject: net: systemport: Utilize skb_put_padto()
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=bb7da333d0a9f3bddc08f84187b7579a3f68fd24;p=linux-beck.git

net: systemport: Utilize skb_put_padto()

Since we need to pad our packets, utilize skb_put_padto() which
increases skb->len by how much we need to pad, allowing us to eliminate
the test on skb->len right below.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 25d1eb4933d0..e67908b5edfe 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -1028,13 +1028,12 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
 	 * (including FCS and tag) because the length verification is done after
 	 * the Broadcom tag is stripped off the ingress packet.
 	 */
-	if (skb_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN)) {
+	if (skb_put_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN)) {
 		ret = NETDEV_TX_OK;
 		goto out;
 	}
 
-	skb_len = skb->len < ETH_ZLEN + ENET_BRCM_TAG_LEN ?
-			ETH_ZLEN + ENET_BRCM_TAG_LEN : skb->len;
+	skb_len = skb->len;
 
 	mapping = dma_map_single(kdev, skb->data, skb_len, DMA_TO_DEVICE);
 	if (dma_mapping_error(kdev, mapping)) {