From: Shimoda, Yoshihiro Date: Fri, 6 Apr 2012 00:59:14 +0000 (+0900) Subject: serial: sh-sci: modify sci_break_ctl() X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=bbb4ce50f3169b08764f9965fd5b9655646d545a;p=linux-beck.git serial: sh-sci: modify sci_break_ctl() SCIF modules which have SCSPTR can output the break signal. Now that we have a way of determining port features/capabilities, add trivial break control via SCSPTR support. Tested on sh7757lcr. Signed-off-by: Yoshihiro Shimoda Reviewed-by: Simon Horman Signed-off-by: Paul Mundt --- diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 3158e17b665c..3e471fc12991 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1564,10 +1564,32 @@ static void sci_enable_ms(struct uart_port *port) static void sci_break_ctl(struct uart_port *port, int break_state) { - /* - * Not supported by hardware. Most parts couple break and rx - * interrupts together, with break detection always enabled. - */ + struct sci_port *s = to_sci_port(port); + unsigned short scscr, scsptr; + + switch (s->cfg->regtype) { + case SCIx_SH4_SCIF_REGTYPE: + scsptr = serial_port_in(port, SCSPTR); + scscr = serial_port_in(port, SCSCR); + + if (break_state == -1) { + scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT; + scscr &= ~SCSCR_TE; + } else { + scsptr = (scsptr | SCSPTR_SPB2DT) & ~SCSPTR_SPB2IO; + scscr |= SCSCR_TE; + } + + serial_port_out(port, SCSPTR, scsptr); + serial_port_out(port, SCSCR, scscr); + break; + default: + /* + * Not supported by hardware. Most parts couple break and rx + * interrupts together, with break detection always enabled. + */ + break; + } } #ifdef CONFIG_SERIAL_SH_SCI_DMA diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 78779074f6e8..eb763adf9815 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -52,6 +52,8 @@ enum { /* SCSPTR, optional */ #define SCSPTR_RTSIO (1 << 7) #define SCSPTR_CTSIO (1 << 5) +#define SCSPTR_SPB2IO (1 << 1) +#define SCSPTR_SPB2DT (1 << 0) /* Offsets into the sci_port->irqs array */ enum {