From: Gabe Black Date: Tue, 6 Oct 2009 15:45:19 +0000 (-0500) Subject: PCI: populate subsystem vendor and device IDs for PCI bridges X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=bc577d2bb98cc44371287fce3e892d26ad4050a8;p=mv-sheeva.git PCI: populate subsystem vendor and device IDs for PCI bridges Change to populate the subsystem vendor and subsytem device IDs for PCI-PCI bridges that implement the PCI Subsystem Vendor ID capability. Previously bridges left subsystem vendor IDs unpopulated. Signed-off-by: Gabe Black Signed-off-by: Jesse Barnes --- diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 118463befef..4842b09b7f3 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -730,6 +730,7 @@ int pci_setup_device(struct pci_dev *dev) u32 class; u8 hdr_type; struct pci_slot *slot; + int pos = 0; if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type)) return -EIO; @@ -822,6 +823,11 @@ int pci_setup_device(struct pci_dev *dev) dev->transparent = ((dev->class & 0xff) == 1); pci_read_bases(dev, 2, PCI_ROM_ADDRESS1); set_pcie_hotplug_bridge(dev); + pos = pci_find_capability(dev, PCI_CAP_ID_SSVID); + if (pos) { + pci_read_config_word(dev, pos + PCI_SSVID_VENDOR_ID, &dev->subsystem_vendor); + pci_read_config_word(dev, pos + PCI_SSVID_DEVICE_ID, &dev->subsystem_device); + } break; case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */ diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index d798770f08c..9f2ad0aa3c3 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -365,6 +365,11 @@ #define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */ #define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */ +/* PCI Bridge Subsystem ID registers */ + +#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */ +#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem device id register */ + /* PCI Express capability registers */ #define PCI_EXP_FLAGS 2 /* Capabilities register */