From: Christoph Hellwig Date: Mon, 28 Mar 2011 00:07:54 +0000 (-0400) Subject: isci: remove mmio wrappers X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=bc99aa47108e9fd759071d4741c7abdf7b903579;p=linux-beck.git isci: remove mmio wrappers Remove a couple of layers around read/writel to make the driver readable. Signed-off-by: Christoph Hellwig Signed-off-by: Dan Williams --- diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 9266fbee79e7..774c4b3b0dfb 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -59,8 +59,7 @@ #include "scic_port.h" #include "scic_remote_device.h" #include "scic_sds_controller.h" -#include "scic_sds_controller_registers.h" -#include "scic_sds_pci.h" +#include "scu_registers.h" #include "scic_sds_phy.h" #include "scic_sds_port_configuration_agent.h" #include "scic_sds_port.h" @@ -355,7 +354,10 @@ static void scic_sds_controller_ram_initialization( * Therefore it no longer comes out of memory in the MDL. */ mde = &this_controller->memory_descriptors[SCU_MDE_COMPLETION_QUEUE]; this_controller->completion_queue = (u32 *)mde->virtual_address; - SMU_CQBAR_WRITE(this_controller, mde->physical_address); + writel(lower_32_bits(mde->physical_address), \ + &this_controller->smu_registers->completion_queue_lower); + writel(upper_32_bits(mde->physical_address), + &this_controller->smu_registers->completion_queue_upper); /* * Program the location of the Remote Node Context table @@ -363,13 +365,19 @@ static void scic_sds_controller_ram_initialization( mde = &this_controller->memory_descriptors[SCU_MDE_REMOTE_NODE_CONTEXT]; this_controller->remote_node_context_table = (union scu_remote_node_context *) mde->virtual_address; - SMU_RNCBAR_WRITE(this_controller, mde->physical_address); + writel(lower_32_bits(mde->physical_address), + &this_controller->smu_registers->remote_node_context_lower); + writel(upper_32_bits(mde->physical_address), + &this_controller->smu_registers->remote_node_context_upper); /* Program the location of the Task Context table into the SCU. */ mde = &this_controller->memory_descriptors[SCU_MDE_TASK_CONTEXT]; this_controller->task_context_table = (struct scu_task_context *) mde->virtual_address; - SMU_HTTBAR_WRITE(this_controller, mde->physical_address); + writel(lower_32_bits(mde->physical_address), + &this_controller->smu_registers->host_task_table_lower); + writel(upper_32_bits(mde->physical_address), + &this_controller->smu_registers->host_task_table_upper); mde = &this_controller->memory_descriptors[SCU_MDE_UF_BUFFER]; scic_sds_unsolicited_frame_control_construct( @@ -378,13 +386,17 @@ static void scic_sds_controller_ram_initialization( /* * Inform the silicon as to the location of the UF headers and - * address table. */ - SCU_UFHBAR_WRITE( - this_controller, - this_controller->uf_control.headers.physical_address); - SCU_PUFATHAR_WRITE( - this_controller, - this_controller->uf_control.address_table.physical_address); + * address table. + */ + writel(lower_32_bits(this_controller->uf_control.headers.physical_address), + &this_controller->scu_registers->sdma.uf_header_base_address_lower); + writel(upper_32_bits(this_controller->uf_control.headers.physical_address), + &this_controller->scu_registers->sdma.uf_header_base_address_upper); + + writel(lower_32_bits(this_controller->uf_control.address_table.physical_address), + &this_controller->scu_registers->sdma.uf_address_table_lower); + writel(upper_32_bits(this_controller->uf_control.address_table.physical_address), + &this_controller->scu_registers->sdma.uf_address_table_upper); } /** @@ -392,25 +404,26 @@ static void scic_sds_controller_ram_initialization( * @this_controller: * */ -static void scic_sds_controller_assign_task_entries( - struct scic_sds_controller *this_controller) +static void +scic_sds_controller_assign_task_entries(struct scic_sds_controller *controller) { u32 task_assignment; /* * Assign all the TCs to function 0 - * TODO: Do we actually need to read this register to write it back? */ - task_assignment = SMU_TCA_READ(this_controller, 0); + * TODO: Do we actually need to read this register to write it back? + */ task_assignment = - ( - task_assignment - | (SMU_TCA_GEN_VAL(STARTING, 0)) - | (SMU_TCA_GEN_VAL(ENDING, this_controller->task_context_entries - 1)) - | (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE)) - ); + readl(&controller->smu_registers->task_context_assignment[0]); + + task_assignment |= (SMU_TCA_GEN_VAL(STARTING, 0)) | + (SMU_TCA_GEN_VAL(ENDING, controller->task_context_entries - 1)) | + (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE)); + + writel(task_assignment, + &controller->smu_registers->task_context_assignment[0]); - SMU_TCA_WRITE(this_controller, 0, task_assignment); } /** @@ -433,7 +446,9 @@ static void scic_sds_controller_initialize_completion_queue( | SMU_CQC_EVENT_LIMIT_SET(this_controller->completion_event_entries - 1) ); - SMU_CQC_WRITE(this_controller, completion_queue_control_value); + writel(completion_queue_control_value, + &this_controller->smu_registers->completion_queue_control); + /* Set the completion queue get pointer and enable the queue */ completion_queue_get_value = ( @@ -443,7 +458,8 @@ static void scic_sds_controller_initialize_completion_queue( | (SMU_CQGR_GEN_BIT(EVENT_ENABLE)) ); - SMU_CQGR_WRITE(this_controller, completion_queue_get_value); + writel(completion_queue_get_value, + &this_controller->smu_registers->completion_queue_get); /* Set the completion queue put pointer */ completion_queue_put_value = ( @@ -451,7 +467,9 @@ static void scic_sds_controller_initialize_completion_queue( | (SMU_CQPR_GEN_VAL(EVENT_POINTER, 0)) ); - SMU_CQPR_WRITE(this_controller, completion_queue_put_value); + writel(completion_queue_put_value, + &this_controller->smu_registers->completion_queue_put); + /* Initialize the cycle bit of the completion queue entries */ for (index = 0; index < this_controller->completion_queue_entries; index++) { @@ -479,7 +497,8 @@ static void scic_sds_controller_initialize_unsolicited_frame_queue( frame_queue_control_value = SCU_UFQC_GEN_VAL(QUEUE_SIZE, this_controller->uf_control.address_table.count); - SCU_UFQC_WRITE(this_controller, frame_queue_control_value); + writel(frame_queue_control_value, + &this_controller->scu_registers->sdma.unsolicited_frame_queue_control); /* Setup the get pointer for the unsolicited frame queue */ frame_queue_get_value = ( @@ -487,12 +506,12 @@ static void scic_sds_controller_initialize_unsolicited_frame_queue( | SCU_UFQGP_GEN_BIT(ENABLE_BIT) ); - SCU_UFQGP_WRITE(this_controller, frame_queue_get_value); - + writel(frame_queue_get_value, + &this_controller->scu_registers->sdma.unsolicited_frame_get_pointer); /* Setup the put pointer for the unsolicited frame queue */ frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0); - - SCU_UFQPP_WRITE(this_controller, frame_queue_put_value); + writel(frame_queue_put_value, + &this_controller->scu_registers->sdma.unsolicited_frame_put_pointer); } /** @@ -505,12 +524,12 @@ static void scic_sds_controller_enable_port_task_scheduler( { u32 port_task_scheduler_value; - port_task_scheduler_value = SCU_PTSGCR_READ(this_controller); - + port_task_scheduler_value = + readl(&this_controller->scu_registers->peg0.ptsg.control); port_task_scheduler_value |= (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) | SCU_PTSGCR_GEN_BIT(PTSG_ENABLE)); - - SCU_PTSGCR_WRITE(this_controller, port_task_scheduler_value); + writel(port_task_scheduler_value, + &this_controller->scu_registers->peg0.ptsg.control); } /** @@ -531,35 +550,34 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s u32 phy_id; /* Clear DFX Status registers */ - scu_afe_register_write(scic, afe_dfx_master_control0, 0x0081000f); + writel(0x0081000f, &scic->scu_registers->afe.afe_dfx_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Configure bias currents to normal */ if (is_a0()) - scu_afe_register_write(scic, afe_bias_control, 0x00005500); + writel(0x00005500, &scic->scu_registers->afe.afe_bias_control); else - scu_afe_register_write(scic, afe_bias_control, 0x00005A00); + writel(0x00005A00, &scic->scu_registers->afe.afe_bias_control); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable PLL */ if (is_b0()) - scu_afe_register_write(scic, afe_pll_control0, 0x80040A08); + writel(0x80040A08, &scic->scu_registers->afe.afe_pll_control0); else - scu_afe_register_write(scic, afe_pll_control0, 0x80040908); + writel(0x80040908, &scic->scu_registers->afe.afe_pll_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Wait for the PLL to lock */ do { - afe_status = scu_afe_register_read( - scic, afe_common_block_status); + afe_status = readl(&scic->scu_registers->afe.afe_common_block_status); udelay(AFE_REGISTER_WRITE_DELAY); } while ((afe_status & 0x00001000) == 0); if (is_b0()) { /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ - scu_afe_register_write(scic, afe_pmsn_master_control0, 0x7bcc96ad); + writel(0x7bcc96ad, &scic->scu_registers->afe.afe_pmsn_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); } @@ -568,16 +586,16 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s if (is_b0()) { /* Configure transmitter SSC parameters */ - scu_afe_txreg_write(scic, phy_id, afe_tx_ssc_control, 0x00030000); + writel(0x00030000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); } else { /* * All defaults, except the Receive Word Alignament/Comma Detect * Enable....(0xe800) */ - scu_afe_txreg_write(scic, phy_id, afe_xcvr_control0, 0x00004512); + writel(0x00004512, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); - scu_afe_txreg_write(scic, phy_id, afe_xcvr_control1, 0x0050100F); + writel(0x0050100F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1); udelay(AFE_REGISTER_WRITE_DELAY); } @@ -585,61 +603,65 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) * & increase TX int & ext bias 20%....(0xe85c) */ if (is_a0()) - scu_afe_txreg_write(scic, phy_id, afe_channel_control, 0x000003D4); + writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); else if (is_a2()) - scu_afe_txreg_write(scic, phy_id, afe_channel_control, 0x000003F0); + writel(0x000003F0, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); else { /* Power down TX and RX (PWRDNTX and PWRDNRX) */ - scu_afe_txreg_write(scic, phy_id, afe_channel_control, 0x000003d7); + writel(0x000003d7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); udelay(AFE_REGISTER_WRITE_DELAY); /* * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) * & increase TX int & ext bias 20%....(0xe85c) */ - scu_afe_txreg_write(scic, phy_id, afe_channel_control, 0x000003d4); + writel(0x000003d4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); } udelay(AFE_REGISTER_WRITE_DELAY); if (is_a0() || is_a2()) { /* Enable TX equalization (0xe824) */ - scu_afe_txreg_write(scic, phy_id, afe_tx_control, 0x00040000); + writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); udelay(AFE_REGISTER_WRITE_DELAY); } /* * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On), * RDD=0x0(RX Detect Enabled) ....(0xe800) */ - scu_afe_txreg_write(scic, phy_id, afe_xcvr_control0, 0x00004100); + writel(0x00004100, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Leave DFE/FFE on */ if (is_a0()) - scu_afe_txreg_write(scic, phy_id, afe_rx_ssc_control0, 0x3F09983F); + writel(0x3F09983F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); else if (is_a2()) - scu_afe_txreg_write(scic, phy_id, afe_rx_ssc_control0, 0x3F11103F); + writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); else { - scu_afe_txreg_write(scic, phy_id, afe_rx_ssc_control0, 0x3F11103F); + writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable TX equalization (0xe824) */ - scu_afe_txreg_write(scic, phy_id, afe_tx_control, 0x00040000); + writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); } udelay(AFE_REGISTER_WRITE_DELAY); - scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, oem_phy->afe_tx_amp_control0); + writel(oem_phy->afe_tx_amp_control0, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0); udelay(AFE_REGISTER_WRITE_DELAY); - scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, oem_phy->afe_tx_amp_control1); + writel(oem_phy->afe_tx_amp_control1, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1); udelay(AFE_REGISTER_WRITE_DELAY); - scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, oem_phy->afe_tx_amp_control2); + writel(oem_phy->afe_tx_amp_control2, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2); udelay(AFE_REGISTER_WRITE_DELAY); - scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, oem_phy->afe_tx_amp_control3); + writel(oem_phy->afe_tx_amp_control3, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3); udelay(AFE_REGISTER_WRITE_DELAY); } /* Transfer control to the PEs */ - scu_afe_register_write(scic, afe_dfx_master_control0, 0x00010f00); + writel(0x00010f00, &scic->scu_registers->afe.afe_dfx_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); } @@ -1437,8 +1459,9 @@ static void scic_sds_controller_process_completions( | event_cycle | SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) | get_cycle | SMU_CQGR_GEN_VAL(POINTER, get_index); - SMU_CQGR_WRITE(this_controller, - this_controller->completion_queue_get); + writel(this_controller->completion_queue_get, + &this_controller->smu_registers->completion_queue_get); + } dev_dbg(scic_to_dev(this_controller), @@ -1456,15 +1479,15 @@ bool scic_sds_controller_isr(struct scic_sds_controller *scic) /* * we have a spurious interrupt it could be that we have already * emptied the completion queue from a previous interrupt */ - SMU_ISR_WRITE(scic, SMU_ISR_COMPLETION); + writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); /* * There is a race in the hardware that could cause us not to be notified * of an interrupt completion if we do not take this step. We will mask * then unmask the interrupts so if there is another interrupt pending * the clearing of the interrupt source we get the next interrupt message. */ - SMU_IMR_WRITE(scic, 0xFF000000); - SMU_IMR_WRITE(scic, 0x00000000); + writel(0xFF000000, &scic->smu_registers->interrupt_mask); + writel(0, &scic->smu_registers->interrupt_mask); } return false; @@ -1477,18 +1500,18 @@ void scic_sds_controller_completion_handler(struct scic_sds_controller *scic) scic_sds_controller_process_completions(scic); /* Clear the interrupt and enable all interrupts again */ - SMU_ISR_WRITE(scic, SMU_ISR_COMPLETION); + writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); /* Could we write the value of SMU_ISR_COMPLETION? */ - SMU_IMR_WRITE(scic, 0xFF000000); - SMU_IMR_WRITE(scic, 0x00000000); + writel(0xFF000000, &scic->smu_registers->interrupt_mask); + writel(0, &scic->smu_registers->interrupt_mask); } bool scic_sds_controller_error_isr(struct scic_sds_controller *scic) { u32 interrupt_status; - interrupt_status = SMU_ISR_READ(scic); - + interrupt_status = + readl(&scic->smu_registers->interrupt_status); interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); if (interrupt_status != 0) { @@ -1504,8 +1527,8 @@ bool scic_sds_controller_error_isr(struct scic_sds_controller *scic) * then unmask the error interrupts so if there was another interrupt * pending we will be notified. * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */ - SMU_IMR_WRITE(scic, 0x000000FF); - SMU_IMR_WRITE(scic, 0x00000000); + writel(0xff, &scic->smu_registers->interrupt_mask); + writel(0, &scic->smu_registers->interrupt_mask); return false; } @@ -1514,14 +1537,14 @@ void scic_sds_controller_error_handler(struct scic_sds_controller *scic) { u32 interrupt_status; - interrupt_status = SMU_ISR_READ(scic); + interrupt_status = + readl(&scic->smu_registers->interrupt_status); if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && scic_sds_controller_completion_queue_has_entries(scic)) { scic_sds_controller_process_completions(scic); - SMU_ISR_WRITE(scic, SMU_ISR_QUEUE_SUSPEND); - + writel(SMU_ISR_QUEUE_SUSPEND, &scic->smu_registers->interrupt_status); } else { dev_err(scic_to_dev(scic), "%s: status: %#x\n", __func__, interrupt_status); @@ -1535,7 +1558,7 @@ void scic_sds_controller_error_handler(struct scic_sds_controller *scic) /* If we dont process any completions I am not sure that we want to do this. * We are in the middle of a hardware fault and should probably be reset. */ - SMU_IMR_WRITE(scic, 0x00000000); + writel(0, &scic->smu_registers->interrupt_mask); } @@ -1648,7 +1671,7 @@ void scic_sds_controller_post_request( this_controller, request); - SMU_PCP_WRITE(this_controller, request); + writel(request, &this_controller->smu_registers->post_context_port); } /** @@ -1871,7 +1894,8 @@ void scic_sds_controller_release_frame( { if (scic_sds_unsolicited_frame_control_release_frame( &this_controller->uf_control, frame_index) == true) - SCU_UFQGP_WRITE(this_controller, this_controller->uf_control.get); + writel(this_controller->uf_control.get, + &this_controller->scu_registers->sdma.unsolicited_frame_get_pointer); } /** @@ -2478,14 +2502,14 @@ void scic_controller_enable_interrupts( struct scic_sds_controller *scic) { BUG_ON(scic->smu_registers == NULL); - SMU_IMR_WRITE(scic, 0x00000000); + writel(0, &scic->smu_registers->interrupt_mask); } void scic_controller_disable_interrupts( struct scic_sds_controller *scic) { BUG_ON(scic->smu_registers == NULL); - SMU_IMR_WRITE(scic, 0xffffffff); + writel(0xffffffff, &scic->smu_registers->interrupt_mask); } static enum sci_status scic_controller_set_mode( @@ -2543,16 +2567,16 @@ static void scic_sds_controller_reset_hardware( scic_controller_disable_interrupts(scic); /* Reset the SCU */ - SMU_SMUSRCR_WRITE(scic, 0xFFFFFFFF); + writel(0xFFFFFFFF, &scic->smu_registers->soft_reset_control); /* Delay for 1ms to before clearing the CQP and UFQPR. */ udelay(1000); /* The write to the CQGR clears the CQP */ - SMU_CQGR_WRITE(scic, 0x00000000); + writel(0x00000000, &scic->smu_registers->completion_queue_get); /* The write to the UFQGP clears the UFQPR */ - SCU_UFQGP_WRITE(scic, 0x00000000); + writel(0, &scic->scu_registers->sdma.unsolicited_frame_get_pointer); } enum sci_status scic_user_parameters_set( @@ -2778,11 +2802,10 @@ static enum sci_status scic_controller_set_interrupt_coalescence( return SCI_FAILURE_INVALID_PARAMETER_VALUE; } - SMU_ICC_WRITE( - scic_controller, - (SMU_ICC_GEN_VAL(NUMBER, coalesce_number) | - SMU_ICC_GEN_VAL(TIMER, timeout_encode)) - ); + writel(SMU_ICC_GEN_VAL(NUMBER, coalesce_number) | + SMU_ICC_GEN_VAL(TIMER, timeout_encode), + &scic_controller->smu_registers->interrupt_coalesce_control); + scic_controller->interrupt_coalesce_number = (u16)coalesce_number; scic_controller->interrupt_coalesce_timeout = coalesce_timeout / 100; @@ -2868,7 +2891,7 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct u32 terminate_loop; /* Take the hardware out of reset */ - SMU_SMUSRCR_WRITE(scic, 0x00000000); + writel(0, &scic->smu_registers->soft_reset_control); /* * / @todo Provide meaningfull error code for hardware failure @@ -2879,7 +2902,7 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct while (terminate_loop-- && (result != SCI_SUCCESS)) { /* Loop until the hardware reports success */ udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME); - status = SMU_SMUCSR_READ(scic); + status = readl(&scic->smu_registers->control_status); if ((status & SCU_RAM_INIT_COMPLETED) == SCU_RAM_INIT_COMPLETED) @@ -2896,7 +2919,9 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct /* * Determine what are the actaul device capacities that the * hardware will support */ - device_context_capacity = SMU_DCC_READ(scic); + device_context_capacity = + readl(&scic->smu_registers->device_context_capacity); + max_supported_ports = smu_dcc_get_max_ports(device_context_capacity); max_supported_devices = smu_dcc_get_max_remote_node_context(device_context_capacity); @@ -2910,9 +2935,7 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct struct scu_port_task_scheduler_group_registers *ptsg = &scic->scu_registers->peg0.ptsg; - scu_register_write(scic, - ptsg->protocol_engine[index], - index); + writel(index, &ptsg->protocol_engine[index]); } /* Record the smaller of the two capacity values */ @@ -2939,16 +2962,20 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct u32 dma_configuration; /* Configure the payload DMA */ - dma_configuration = SCU_PDMACR_READ(scic); + dma_configuration = + readl(&scic->scu_registers->sdma.pdma_configuration); dma_configuration |= SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); - SCU_PDMACR_WRITE(scic, dma_configuration); + writel(dma_configuration, + &scic->scu_registers->sdma.pdma_configuration); /* Configure the control DMA */ - dma_configuration = SCU_CDMACR_READ(scic); + dma_configuration = + readl(&scic->scu_registers->sdma.cdma_configuration); dma_configuration |= SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); - SCU_CDMACR_WRITE(scic, dma_configuration); + writel(dma_configuration, + &scic->scu_registers->sdma.cdma_configuration); } /* diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index fd78148d93d9..baf0b9ededec 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -57,6 +57,7 @@ #define _SCIC_SDS_CONTROLLER_H_ #include +#include /** * This file contains the structures, constants and prototypes used for the @@ -80,7 +81,6 @@ #include "scu_unsolicited_frame.h" #include "scic_sds_unsolicited_frame_control.h" #include "scic_sds_port_configuration_agent.h" -#include "scic_sds_pci.h" struct scic_sds_remote_device; struct scic_sds_request; @@ -427,38 +427,6 @@ extern const struct scic_sds_controller_state_handler #define scic_sds_controller_get_port_configuration_agent(controller) \ (&(controller)->port_agent) -/** - * smu_register_write() - - * - * This macro writes to the smu_register for this controller - */ -#define smu_register_write(controller, reg, value) \ - scic_sds_pci_write_smu_dword((controller), &(reg), (value)) - -/** - * smu_register_read() - - * - * This macro reads the smu_register for this controller - */ -#define smu_register_read(controller, reg) \ - scic_sds_pci_read_smu_dword((controller), &(reg)) - -/** - * scu_register_write() - - * - * This mcaro writes the scu_register for this controller - */ -#define scu_register_write(controller, reg, value) \ - scic_sds_pci_write_scu_dword((controller), &(reg), (value)) - -/** - * scu_register_read() - - * - * This macro reads the scu_register for this controller - */ -#define scu_register_read(controller, reg) \ - scic_sds_pci_read_scu_dword((controller), &(reg)) - /** * scic_sds_controller_get_protocol_engine_group() - * diff --git a/drivers/scsi/isci/core/scic_sds_controller_registers.h b/drivers/scsi/isci/core/scic_sds_controller_registers.h deleted file mode 100644 index b7bec92ee59c..000000000000 --- a/drivers/scsi/isci/core/scic_sds_controller_registers.h +++ /dev/null @@ -1,463 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_CONTROLLER_REGISTERS_H_ -#define _SCIC_SDS_CONTROLLER_REGISTERS_H_ - -/** - * This file contains macros used to perform the register reads/writes to the - * SCU hardware. - * - * - */ - -#include "scu_registers.h" -#include "scic_sds_controller.h" - -/** - * scic_sds_controller_smu_register_read() - - * - * SMU_REGISTER_ACCESS_MACROS - */ -#define scic_sds_controller_smu_register_read(controller, reg) \ - smu_register_read(\ - (controller), \ - (controller)->smu_registers->reg \ - ) - -#define scic_sds_controller_smu_register_write(controller, reg, value) \ - smu_register_write(\ - (controller), \ - (controller)->smu_registers->reg, \ - (value) \ - ) - -/** - * scu_afe_register_write() - - * - * AFE_REGISTER_ACCESS_MACROS - */ -#define scu_afe_register_write(controller, reg, value) \ - scu_register_write(\ - (controller), \ - (controller)->scu_registers->afe.reg, \ - (value) \ - ) - -#define scu_afe_txreg_write(controller, phy, reg, value) \ - scu_register_write(\ - (controller), \ - (controller)->scu_registers->afe.scu_afe_xcvr[phy].reg,\ - (value) \ - ) - -#define scu_afe_register_read(controller, reg) \ - scu_register_read(\ - (controller), \ - (controller)->scu_registers->afe.reg \ - ) - -/** - * scu_controller_viit_register_write() - - * - * VIIT_REGISTER_ACCESS_MACROS - */ -#define scu_controller_viit_register_write(controller, index, reg, value) \ - scu_register_write(\ - (controller), \ - (controller)->scu_registers->peg0.viit[index].reg, \ - value \ - ) - -/* - * ***************************************************************************** - * * SMU REGISTERS - * ***************************************************************************** */ - -/** - * SMU_PCP_WRITE() - - * - * struct smu_registers - */ -#define SMU_PCP_WRITE(controller, value) \ - scic_sds_controller_smu_register_write(\ - controller, post_context_port, value \ - ) - -#define SMU_TCR_READ(controller, value) \ - scic_sds_controller_smu_register_read(\ - controller, task_context_range \ - ) - -#define SMU_TCR_WRITE(controller, value) \ - scic_sds_controller_smu_register_write(\ - controller, task_context_range, value \ - ) - -#define SMU_HTTBAR_WRITE(controller, address) \ - { \ - scic_sds_controller_smu_register_write(\ - controller, \ - host_task_table_lower, \ - lower_32_bits(address) \ - ); \ - scic_sds_controller_smu_register_write(\ - controller, \ - host_task_table_upper, \ - upper_32_bits(address) \ - ); \ - } - -#define SMU_CQBAR_WRITE(controller, address) \ - { \ - scic_sds_controller_smu_register_write(\ - controller, \ - completion_queue_lower, \ - lower_32_bits(address) \ - ); \ - scic_sds_controller_smu_register_write(\ - controller, \ - completion_queue_upper, \ - upper_32_bits(address) \ - ); \ - } - -#define SMU_CQGR_WRITE(controller, value) \ - scic_sds_controller_smu_register_write(\ - controller, completion_queue_get, value \ - ) - -#define SMU_CQGR_READ(controller, value) \ - scic_sds_controller_smu_register_read(\ - controller, completion_queue_get \ - ) - -#define SMU_CQPR_WRITE(controller, value) \ - scic_sds_controller_smu_register_write(\ - controller, completion_queue_put, value \ - ) - -#define SMU_RNCBAR_WRITE(controller, address) \ - { \ - scic_sds_controller_smu_register_write(\ - controller, \ - remote_node_context_lower, \ - lower_32_bits(address) \ - ); \ - scic_sds_controller_smu_register_write(\ - controller, \ - remote_node_context_upper, \ - upper_32_bits(address) \ - ); \ - } - -#define SMU_AMR_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, address_modifier \ - ) - -#define SMU_IMR_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, interrupt_mask \ - ) - -#define SMU_IMR_WRITE(controller, mask) \ - scic_sds_controller_smu_register_write(\ - controller, interrupt_mask, mask \ - ) - -#define SMU_ISR_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, interrupt_status \ - ) - -#define SMU_ISR_WRITE(controller, status) \ - scic_sds_controller_smu_register_write(\ - controller, interrupt_status, status \ - ) - -#define SMU_ICC_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, interrupt_coalesce_control \ - ) - -#define SMU_ICC_WRITE(controller, value) \ - scic_sds_controller_smu_register_write(\ - controller, interrupt_coalesce_control, value \ - ) - -#define SMU_CQC_WRITE(controller, value) \ - scic_sds_controller_smu_register_write(\ - controller, completion_queue_control, value \ - ) - -#define SMU_SMUSRCR_WRITE(controller, value) \ - scic_sds_controller_smu_register_write(\ - controller, soft_reset_control, value \ - ) - -#define SMU_TCA_WRITE(controller, index, value) \ - scic_sds_controller_smu_register_write(\ - controller, task_context_assignment[index], value \ - ) - -#define SMU_TCA_READ(controller, index) \ - scic_sds_controller_smu_register_read(\ - controller, task_context_assignment[index] \ - ) - -#define SMU_DCC_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, device_context_capacity \ - ) - -#define SMU_DFC_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, device_function_capacity \ - ) - -#define SMU_SMUCSR_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, control_status \ - ) - -#define SMU_CQPR_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, completion_queue_put \ - ) - - -/** - * scic_sds_controller_scu_register_read() - - * - * SCU_REGISTER_ACCESS_MACROS - */ -#define scic_sds_controller_scu_register_read(controller, reg) \ - scu_register_read(\ - (controller), \ - (controller)->scu_registers->reg \ - ) - -#define scic_sds_controller_scu_register_write(controller, reg, value) \ - scu_register_write(\ - (controller), \ - (controller)->scu_registers->reg, \ - (value) \ - ) - - -/* - * **************************************************************************** - * * SCU SDMA REGISTERS - * **************************************************************************** */ - -/** - * scu_sdma_register_read() - - * - * SCU_SDMA_REGISTER_ACCESS_MACROS - */ -#define scu_sdma_register_read(controller, reg) \ - scu_register_read(\ - (controller), \ - (controller)->scu_registers->sdma.reg \ - ) - -#define scu_sdma_register_write(controller, reg, value) \ - scu_register_write(\ - (controller), \ - (controller)->scu_registers->sdma.reg, \ - (value) \ - ) - -/** - * SCU_PUFATHAR_WRITE() - - * - * struct scu_sdma_registers - */ -#define SCU_PUFATHAR_WRITE(controller, address) \ - { \ - scu_sdma_register_write(\ - controller, \ - uf_address_table_lower, \ - lower_32_bits(address) \ - ); \ - scu_sdma_register_write(\ - controller, \ - uf_address_table_upper, \ - upper_32_bits(address) \ - ); \ - } - -#define SCU_UFHBAR_WRITE(controller, address) \ - { \ - scu_sdma_register_write(\ - controller, \ - uf_header_base_address_lower, \ - lower_32_bits(address) \ - ); \ - scu_sdma_register_write(\ - controller, \ - uf_header_base_address_upper, \ - upper_32_bits(address) \ - ); \ - } - -#define SCU_UFQC_READ(controller) \ - scu_sdma_register_read(\ - controller, \ - unsolicited_frame_queue_control \ - ) - -#define SCU_UFQC_WRITE(controller, value) \ - scu_sdma_register_write(\ - controller, \ - unsolicited_frame_queue_control, \ - value \ - ) - -#define SCU_UFQPP_READ(controller) \ - scu_sdma_register_read(\ - controller, \ - unsolicited_frame_put_pointer \ - ) - -#define SCU_UFQPP_WRITE(controller, value) \ - scu_sdma_register_write(\ - controller, \ - unsolicited_frame_put_pointer, \ - value \ - ) - -#define SCU_UFQGP_WRITE(controller, value) \ - scu_sdma_register_write(\ - controller, \ - unsolicited_frame_get_pointer, \ - value \ - ) - -#define SCU_PDMACR_READ(controller) \ - scu_sdma_register_read(\ - controller, \ - pdma_configuration \ - ) - -#define SCU_PDMACR_WRITE(controller, value) \ - scu_sdma_register_write(\ - controller, \ - pdma_configuration, \ - value \ - ) - -#define SCU_CDMACR_READ(controller) \ - scu_sdma_register_read(\ - controller, \ - cdma_configuration \ - ) - -#define SCU_CDMACR_WRITE(controller, value) \ - scu_sdma_register_write(\ - controller, \ - cdma_configuration, \ - value \ - ) - -/* - * ***************************************************************************** - * * SCU Port Task Scheduler Group Registers - * ***************************************************************************** */ - -/** - * scu_ptsg_register_read() - - * - * SCU_PTSG_REGISTER_ACCESS_MACROS - */ -#define scu_ptsg_register_read(controller, reg) \ - scu_register_read(\ - (controller), \ - (controller)->scu_registers->peg0.ptsg.reg \ - ) - -#define scu_ptsg_register_write(controller, reg, value) \ - scu_register_write(\ - (controller), \ - (controller)->scu_registers->peg0.ptsg.reg, \ - (value) \ - ) - -/** - * SCU_PTSGCR_READ() - - * - * SCU_PTSG_REGISTERS - */ -#define SCU_PTSGCR_READ(controller) \ - scu_ptsg_register_read(\ - (controller), \ - control \ - ) - -#define SCU_PTSGCR_WRITE(controller, value) \ - scu_ptsg_register_write(\ - (controller), \ - control, \ - value \ - ) - -#define SCU_PTSGRTC_READ(controller) \ - scu_ptsg_register_read(\ - contoller, \ - real_time_clock \ - ) - -#endif /* _SCIC_SDS_CONTROLLER_REGISTERS_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_pci.h b/drivers/scsi/isci/core/scic_sds_pci.h deleted file mode 100644 index bf0cbcaac526..000000000000 --- a/drivers/scsi/isci/core/scic_sds_pci.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_PCI_H_ -#define _SCIC_SDS_PCI_H_ - -/** - * This file contains the prototypes/macros utilized in writing out PCI data - * for the SCI core. - * - * - */ - -#include - -struct scic_sds_controller; - -void scic_sds_pci_bar_initialization(struct scic_sds_controller *scic); - -/* for debug we separate scu and smu accesses and require a controller */ -static inline u32 scic_sds_pci_read_smu_dword(struct scic_sds_controller *scic, void __iomem *addr) -{ - return readl(addr); -} - -static inline void scic_sds_pci_write_smu_dword(struct scic_sds_controller *scic, void __iomem *addr, u32 value) -{ - writel(value, addr); -} - -static inline u32 scic_sds_pci_read_scu_dword(struct scic_sds_controller *scic, void __iomem *addr) -{ - return readl(addr); -} - -static inline void scic_sds_pci_write_scu_dword(struct scic_sds_controller *scic, void __iomem *addr, u32 value) -{ - writel(value, addr); -} - - -#endif /* _SCIC_SDS_PCI_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 532338eb302b..c26e5df18142 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -60,7 +60,6 @@ #include "scic_phy.h" #include "scic_sds_controller.h" #include "scic_sds_phy.h" -#include "scic_sds_phy_registers.h" #include "scic_sds_port.h" #include "scic_sds_remote_node_context.h" #include "sci_environment.h" @@ -98,12 +97,13 @@ static enum sci_status scic_sds_phy_transport_layer_initialization( this_phy->transport_layer_registers = transport_layer_registers; - SCU_STPTLDARNI_WRITE(this_phy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); + writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX, + &this_phy->transport_layer_registers->stp_rni); /* Hardware team recommends that we enable the STP prefetch for all transports */ - tl_control = SCU_TLCR_READ(this_phy); + tl_control = readl(&this_phy->transport_layer_registers->control); tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH); - SCU_TLCR_WRITE(this_phy, tl_control); + writel(tl_control, &this_phy->transport_layer_registers->control); return SCI_SUCCESS; } @@ -135,30 +135,36 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, /* Set our IDENTIFY frame data */ #define SCI_END_DEVICE 0x01 - SCU_SAS_TIID_WRITE(sci_phy, (SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) | - SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) | - SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | - SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | - SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE))); + writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | + SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE), + &sci_phy->link_layer_registers->transmit_identification); /* Write the device SAS Address */ - SCU_SAS_TIDNH_WRITE(sci_phy, 0xFEDCBA98); - SCU_SAS_TIDNL_WRITE(sci_phy, phy_idx); + writel(0xFEDCBA98, &sci_phy->link_layer_registers->sas_device_name_high); + writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low); /* Write the source SAS Address */ - SCU_SAS_TISSAH_WRITE(sci_phy, phy_oem->sas_address.high); - SCU_SAS_TISSAL_WRITE(sci_phy, phy_oem->sas_address.low); + writel(phy_oem->sas_address.high, + &sci_phy->link_layer_registers->source_sas_address_high); + writel(phy_oem->sas_address.low, + &sci_phy->link_layer_registers->source_sas_address_low); /* Clear and Set the PHY Identifier */ - SCU_SAS_TIPID_WRITE(sci_phy, 0x00000000); - SCU_SAS_TIPID_WRITE(sci_phy, SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx)); + writel(0, &sci_phy->link_layer_registers->identify_frame_phy_id); + writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), + &sci_phy->link_layer_registers->identify_frame_phy_id); /* Change the initial state of the phy configuration register */ - phy_configuration = SCU_SAS_PCFG_READ(sci_phy); + phy_configuration = + readl(&sci_phy->link_layer_registers->phy_configuration); /* Hold OOB state machine in reset */ phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - SCU_SAS_PCFG_WRITE(sci_phy, phy_configuration); + writel(phy_configuration, + &sci_phy->link_layer_registers->phy_configuration); /* Configure the SNW capabilities */ phy_capabilities.u.all = 0; @@ -188,13 +194,15 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, if ((parity_count % 2) != 0) phy_capabilities.u.bits.parity = 1; - SCU_SAS_PHYCAP_WRITE(sci_phy, phy_capabilities.u.all); + writel(phy_capabilities.u.all, + &sci_phy->link_layer_registers->phy_capabilities); /* Set the enable spinup period but disable the ability to send * notify enable spinup */ - SCU_SAS_ENSPINUP_WRITE(sci_phy, SCU_ENSPINUP_GEN_VAL(COUNT, - phy_user->notify_enable_spin_up_insertion_frequency)); + writel(SCU_ENSPINUP_GEN_VAL(COUNT, + phy_user->notify_enable_spin_up_insertion_frequency), + &sci_phy->link_layer_registers->notify_enable_spinup_control); /* Write the ALIGN Insertion Ferequency for connected phy and * inpendent of connected state @@ -205,10 +213,11 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, phy_user->align_insertion_frequency); - SCU_SAS_CLKSM_WRITE(sci_phy, clksm_value); + writel(clksm_value, &sci_phy->link_layer_registers->clock_skew_management); /* @todo Provide a way to write this register correctly */ - scu_link_layer_register_write(sci_phy, afe_lookup_table_control, 0x02108421); + writel(0x02108421, + &sci_phy->link_layer_registers->afe_lookup_table_control); llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, (u8)scic->user_parameters.sds1.no_outbound_task_timeout); @@ -225,8 +234,7 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, break; } llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); - - scu_link_layer_register_write(sci_phy, link_layer_control, llctl); + writel(llctl, &sci_phy->link_layer_registers->link_layer_control); if (is_a0() || is_a2()) { /* Program the max ARB time for the PHY to 700us so we inter-operate with @@ -234,16 +242,15 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, * many breaks. This time value will guarantee that the initiator PHY will * generate the break. */ - scu_link_layer_register_write(sci_phy, - maximum_arbitration_wait_timer_timeout, - SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME); + writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME, + &sci_phy->link_layer_registers->maximum_arbitration_wait_timer_timeout); } /* * Set the link layer hang detection to 500ms (0x1F4) from its default - * value of 128ms. Max value is 511 ms. */ - scu_link_layer_register_write(sci_phy, link_layer_hang_detection_timeout, - 0x1F4); + * value of 128ms. Max value is 511 ms. + */ + writel(0x1F4, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout); /* We can exit the initial state to the stopped state */ sci_base_state_machine_change_state(&sci_phy->parent.state_machine, @@ -367,15 +374,15 @@ void scic_sds_phy_setup_transport( { u32 tl_control; - SCU_STPTLDARNI_WRITE(this_phy, device_id); + writel(device_id, &this_phy->transport_layer_registers->stp_rni); /* * The read should guarantee that the first write gets posted * before the next write */ - tl_control = SCU_TLCR_READ(this_phy); + tl_control = readl(&this_phy->transport_layer_registers->control); tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); - SCU_TLCR_WRITE(this_phy, tl_control); + writel(tl_control, &this_phy->transport_layer_registers->control); } /** @@ -390,9 +397,12 @@ static void scic_sds_phy_suspend( { u32 scu_sas_pcfg_value; - scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); + scu_sas_pcfg_value = + readl(&this_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); - SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); + writel(scu_sas_pcfg_value, + &this_phy->link_layer_registers->phy_configuration); + scic_sds_phy_setup_transport(this_phy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); } @@ -408,11 +418,11 @@ void scic_sds_phy_resume( { u32 scu_sas_pcfg_value; - scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); - + scu_sas_pcfg_value = + readl(&this_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); - - SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); + writel(scu_sas_pcfg_value, + &this_phy->link_layer_registers->phy_configuration); } /** @@ -427,8 +437,8 @@ void scic_sds_phy_get_sas_address( struct scic_sds_phy *this_phy, struct sci_sas_address *sas_address) { - sas_address->high = SCU_SAS_TISSAH_READ(this_phy); - sas_address->low = SCU_SAS_TISSAL_READ(this_phy); + sas_address->high = readl(&this_phy->link_layer_registers->source_sas_address_high); + sas_address->low = readl(&this_phy->link_layer_registers->source_sas_address_low); } /** @@ -460,7 +470,10 @@ void scic_sds_phy_get_protocols( struct scic_sds_phy *this_phy, struct sci_sas_identify_address_frame_protocols *protocols) { - protocols->u.all = (u16)(SCU_SAS_TIID_READ(this_phy) & 0x0000FFFF); + protocols->u.all = + (u16)(readl(&this_phy-> + link_layer_registers->transmit_identification) & + 0x0000FFFF); } /** @@ -589,8 +602,8 @@ enum sci_status scic_sas_phy_get_properties( sizeof(struct sci_sas_identify_address_frame) ); - properties->received_capabilities.u.all - = SCU_SAS_RECPHYCAP_READ(sci_phy); + properties->received_capabilities.u.all = + readl(&sci_phy->link_layer_registers->receive_phycap); return SCI_SUCCESS; } @@ -639,9 +652,11 @@ static void scic_sds_phy_start_sas_link_training( { u32 phy_control; - phy_control = SCU_SAS_PCFG_READ(this_phy); + phy_control = + readl(&this_phy->link_layer_registers->phy_configuration); phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD); - SCU_SAS_PCFG_WRITE(this_phy, phy_control); + writel(phy_control, + &this_phy->link_layer_registers->phy_configuration); sci_base_state_machine_change_state( &this_phy->starting_substate_machine, @@ -1331,9 +1346,9 @@ static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_po { u32 enable_spinup; - enable_spinup = SCU_SAS_ENSPINUP_READ(sci_phy); + enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE); - SCU_SAS_ENSPINUP_WRITE(sci_phy, enable_spinup); + writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control); /* Change state to the final state this substate machine has run to completion */ sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, @@ -1357,16 +1372,19 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_p u32 scu_sas_pcfg_value; /* Release the spinup hold state and reset the OOB state machine */ - scu_sas_pcfg_value = SCU_SAS_PCFG_READ(sci_phy); + scu_sas_pcfg_value = + readl(&sci_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value &= ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - SCU_SAS_PCFG_WRITE(sci_phy, scu_sas_pcfg_value); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); /* Now restart the OOB operation */ scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); - SCU_SAS_PCFG_WRITE(sci_phy, scu_sas_pcfg_value); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); /* Change state to the final state this substate machine has run to completion */ sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, @@ -2120,18 +2138,20 @@ static void scu_link_layer_stop_protocol_engine( u32 enable_spinup_value; /* Suspend the protocol engine and place it in a sata spinup hold state */ - scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); + scu_sas_pcfg_value = + readl(&this_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value |= ( SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) | SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) ); - SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); + writel(scu_sas_pcfg_value, + &this_phy->link_layer_registers->phy_configuration); /* Disable the notify enable spinup primitives */ - enable_spinup_value = SCU_SAS_ENSPINUP_READ(this_phy); + enable_spinup_value = readl(&this_phy->link_layer_registers->notify_enable_spinup_control); enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE); - SCU_SAS_ENSPINUP_WRITE(this_phy, enable_spinup_value); + writel(enable_spinup_value, &this_phy->link_layer_registers->notify_enable_spinup_control); } /** @@ -2144,12 +2164,13 @@ static void scu_link_layer_start_oob( { u32 scu_sas_pcfg_value; - scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); + scu_sas_pcfg_value = + readl(&this_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); scu_sas_pcfg_value &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); - - SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); + writel(scu_sas_pcfg_value, + &this_phy->link_layer_registers->phy_configuration); } /** @@ -2168,15 +2189,18 @@ static void scu_link_layer_tx_hard_reset( /* * SAS Phys must wait for the HARD_RESET_TX event notification to transition * to the starting state. */ - phy_configuration_value = SCU_SAS_PCFG_READ(this_phy); + phy_configuration_value = + readl(&this_phy->link_layer_registers->phy_configuration); phy_configuration_value |= (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); - SCU_SAS_PCFG_WRITE(this_phy, phy_configuration_value); + writel(phy_configuration_value, + &this_phy->link_layer_registers->phy_configuration); /* Now take the OOB state machine out of reset */ phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - SCU_SAS_PCFG_WRITE(this_phy, phy_configuration_value); + writel(phy_configuration_value, + &this_phy->link_layer_registers->phy_configuration); } /* diff --git a/drivers/scsi/isci/core/scic_sds_phy_registers.h b/drivers/scsi/isci/core/scic_sds_phy_registers.h deleted file mode 100644 index ddbb2361510d..000000000000 --- a/drivers/scsi/isci/core/scic_sds_phy_registers.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_PHY_REGISTERS_H_ -#define _SCIC_SDS_PHY_REGISTERS_H_ - -/** - * This file contains the macros used by the phy object to read/write to the - * SCU link layer registers. - * - * - */ - -#include "scic_sds_controller.h" - -/* ************************************************************************** - * * SCU TRANSPORT LAYER REGISTER OPERATIONS - * ************************************************************************** */ - -/** - * Macro to read the transport layer register associated with this phy - * object. - */ -#define scu_transport_layer_read(phy, reg) \ - scu_register_read( \ - scic_sds_phy_get_controller(phy), \ - (phy)->transport_layer_registers->reg \ - ) - -/** - * Macro to write the transport layer register associated with this phy - * object. - */ -#define scu_transport_layer_write(phy, reg, value) \ - scu_register_write( \ - scic_sds_phy_get_controller(phy), \ - (phy)->transport_layer_registers->reg, \ - (value) \ - ) - -/* ************************************************************************** - * * Transport Layer registers controlled by the phy object - * ************************************************************************** */ - -/* This macro reads the Transport layer control register */ -#define SCU_TLCR_READ(phy) \ - scu_transport_layer_read(phy, control) - -/* This macro writes the Transport layer control register */ -#define SCU_TLCR_WRITE(phy, value) \ - scu_transport_layer_write(phy, control, value) - -/* This macro reads the Transport layer address translation register */ -#define SCU_TLADTR_READ(phy) \ - scu_transport_layer_read(phy, address_translation) - -/* This macro writes the Transport layer address translation register */ -#define SCU_TLADTR_WRITE(phy) \ - scu_transport_layer_write(phy, address_translation, value) - -/* This macro writes the STP Transport Layer Direct Attached RNi register */ -#define SCU_STPTLDARNI_WRITE(phy, index) \ - scu_transport_layer_write(phy, stp_rni, index) - -/* This macro reads the STP Transport Layer Direct Attached RNi register */ -#define SCU_STPTLDARNI_READ(phy) \ - scu_transport_layer_read(phy, stp_rni) - -/* - * ***************************************************************************** - * * SCU LINK LAYER REGISTER OPERATIONS - * ***************************************************************************** */ - -/** - * scu_link_layer_register_read() - - * - * THis macro requests the SCU register write for the specified link layer - * register. - */ -#define scu_link_layer_register_read(phy, reg) \ - scu_register_read(\ - scic_sds_phy_get_controller(phy), \ - (phy)->link_layer_registers->reg \ - ) - -/** - * scu_link_layer_register_write() - - * - * This macro requests the SCU register read for the specified link layer - * register. - */ -#define scu_link_layer_register_write(phy, reg, value) \ - scu_register_write(\ - scic_sds_phy_get_controller(phy), \ - (phy)->link_layer_registers->reg, \ - (value) \ - ) - -/* - * ***************************************************************************** - * * SCU LINK LAYER REGISTERS - * ***************************************************************************** */ - -/* / This macro reads from the SAS Identify Frame PHY Identifier register */ -#define SCU_SAS_TIPID_READ(phy) \ - scu_link_layer_register_read(phy, identify_frame_phy_id) - -/* / This macro writes to the SAS Identify Frame PHY Identifier register */ -#define SCU_SAS_TIPID_WRITE(phy, value) \ - scu_link_layer_register_write(phy, identify_frame_phy_id, value) - -/* / This macro reads from the SAS Identification register */ -#define SCU_SAS_TIID_READ(phy) \ - scu_link_layer_register_read(phy, transmit_identification) - -/* / This macro writes to the SAS Identification register */ -#define SCU_SAS_TIID_WRITE(phy, value) \ - scu_link_layer_register_write(phy, transmit_identification, value) - -/* / This macro reads the SAS Device Name High register */ -#define SCU_SAS_TIDNH_READ(phy) \ - scu_link_layer_register_read(phy, sas_device_name_high) - -/* / This macro writes the SAS Device Name High register */ -#define SCU_SAS_TIDNH_WRITE(phy, value) \ - scu_link_layer_register_write(phy, sas_device_name_high, value) - -/* / This macro reads the SAS Device Name Low register */ -#define SCU_SAS_TIDNL_READ(phy) \ - scu_link_layer_register_read(phy, sas_device_name_low) - -/* / This macro writes the SAS Device Name Low register */ -#define SCU_SAS_TIDNL_WRITE(phy, value) \ - scu_link_layer_register_write(phy, sas_device_name_low, value) - -/* / This macro reads the Source SAS Address High register */ -#define SCU_SAS_TISSAH_READ(phy) \ - scu_link_layer_register_read(phy, source_sas_address_high) - -/* / This macro writes the Source SAS Address High register */ -#define SCU_SAS_TISSAH_WRITE(phy, value) \ - scu_link_layer_register_write(phy, source_sas_address_high, value) - -/* / This macro reads the Source SAS Address Low register */ -#define SCU_SAS_TISSAL_READ(phy) \ - scu_link_layer_register_read(phy, source_sas_address_low) - -/* / This macro writes the Source SAS Address Low register */ -#define SCU_SAS_TISSAL_WRITE(phy, value) \ - scu_link_layer_register_write(phy, source_sas_address_low, value) - -/* / This macro reads the PHY Configuration register */ -#define SCU_SAS_PCFG_READ(phy) \ - scu_link_layer_register_read(phy, phy_configuration); - -/* / This macro writes the PHY Configuration register */ -#define SCU_SAS_PCFG_WRITE(phy, value) \ - scu_link_layer_register_write(phy, phy_configuration, value) - -/* / This macro reads the PHY Enable Spinup register */ -#define SCU_SAS_ENSPINUP_READ(phy) \ - scu_link_layer_register_read(phy, notify_enable_spinup_control) - -/* / This macro writes the PHY Enable Spinup register */ -#define SCU_SAS_ENSPINUP_WRITE(phy, value) \ - scu_link_layer_register_write(phy, notify_enable_spinup_control, value) - -/* This macro reads the CLKSM register */ -#define SCU_SAS_CLKSM_READ(phy) \ - scu_link_layer_register_read(phy, clock_skew_management) - -/* This macro writes the CLKSM register */ -#define SCU_SAS_CLKSM_WRITE(phy, value) \ - scu_link_layer_register_write(phy, clock_skew_management, value) - -/* / This macro reads the PHY Capacity register */ -#define SCU_SAS_PHYCAP_READ(phy) \ - scu_link_layer_register_read(phy, phy_capabilities) - -/* / This macro writes the PHY Capacity register */ -#define SCU_SAS_PHYCAP_WRITE(phy, value) \ - scu_link_layer_register_write(phy, phy_capabilities, value) - -/* / This macro reads the Recieved PHY Capacity register */ -#define SCU_SAS_RECPHYCAP_READ(phy) \ - scu_link_layer_register_read(phy, receive_phycap) - -/* / This macro reads the link layer control register */ -#define SCU_SAS_LLCTL_READ(phy) \ - scu_link_layer_register_read(phy, link_layer_control); - -/* / This macro writes the link layer control register */ -#define SCU_SAS_LLCTL_WRITE(phy, value) \ - scu_link_layer_register_write(phy, link_layer_control, value); - -#endif /* _SCIC_SDS_PHY_REGISTERS_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 88b892de5de4..8e3983ebc4dc 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -60,14 +60,12 @@ #include "scic_port.h" #include "scic_sds_controller.h" #include "scic_sds_phy.h" -#include "scic_sds_phy_registers.h" #include "scic_sds_port.h" -#include "scic_sds_port_registers.h" #include "scic_sds_remote_device.h" #include "scic_sds_remote_node_context.h" #include "scic_sds_request.h" #include "sci_environment.h" -#include "scic_sds_controller_registers.h" +#include "scu_registers.h" #define SCIC_SDS_PORT_MIN_TIMER_COUNT (SCI_MAX_PORTS) #define SCIC_SDS_PORT_MAX_TIMER_COUNT (SCI_MAX_PORTS) @@ -706,7 +704,8 @@ void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, sci_phy->max_negotiated_speed = SCI_SAS_NO_LINK_RATE; /* Re-assign the phy back to the LP as if it were a narrow port */ - SCU_PCSPExCR_WRITE(sci_port, sci_phy->phy_index, sci_phy->phy_index); + writel(sci_phy->phy_index, + &sci_port->port_pe_configuration_register[sci_phy->phy_index]); if (do_notify_user == true) isci_port_link_down(ihost, iphy, iport); @@ -969,25 +968,20 @@ static void scic_sds_port_update_viit_entry(struct scic_sds_port *this_port) scic_sds_port_get_sas_address(this_port, &sas_address); - scu_port_viit_register_write( - this_port, initiator_sas_address_hi, sas_address.high); - - scu_port_viit_register_write( - this_port, initiator_sas_address_lo, sas_address.low); + writel(sas_address.high, + &this_port->viit_registers->initiator_sas_address_hi); + writel(sas_address.low, + &this_port->viit_registers->initiator_sas_address_lo); /* This value get cleared just in case its not already cleared */ - scu_port_viit_register_write( - this_port, reserved, 0); + writel(0, &this_port->viit_registers->reserved); /* We are required to update the status register last */ - scu_port_viit_register_write( - this_port, status, ( - SCU_VIIT_ENTRY_ID_VIIT - | SCU_VIIT_IPPT_INITIATOR - | ((1 << this_port->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) - | SCU_VIIT_STATUS_ALL_VALID - ) - ); + writel(SCU_VIIT_ENTRY_ID_VIIT | + SCU_VIIT_IPPT_INITIATOR | + ((1 << this_port->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) | + SCU_VIIT_STATUS_ALL_VALID, + &this_port->viit_registers->status); } /** @@ -1059,10 +1053,12 @@ void scic_port_enable_broadcast_change_notification( for (index = 0; index < SCI_MAX_PHYS; index++) { phy = port->phy_table[index]; if (phy != NULL) { - register_value = SCU_SAS_LLCTL_READ(phy); + register_value = + readl(&phy->link_layer_registers->link_layer_control); /* clear the bit by writing 1. */ - SCU_SAS_LLCTL_WRITE(phy, register_value); + writel(register_value, + &phy->link_layer_registers->link_layer_control); } } } @@ -1618,16 +1614,14 @@ scic_sds_port_ready_substate_handler_table[SCIC_SDS_PORT_READY_MAX_SUBSTATES] = * * This method will susped the port task scheduler for this port object. none */ -static void scic_sds_port_suspend_port_task_scheduler( - struct scic_sds_port *this_port) +static void +scic_sds_port_suspend_port_task_scheduler(struct scic_sds_port *port) { u32 pts_control_value; - pts_control_value = scu_port_task_scheduler_read(this_port, control); - + pts_control_value = readl(&port->port_task_scheduler_registers->control); pts_control_value |= SCU_PTSxCR_GEN_BIT(SUSPEND); - - scu_port_task_scheduler_write(this_port, control, pts_control_value); + writel(pts_control_value, &port->port_task_scheduler_registers->control); } /** @@ -1688,16 +1682,14 @@ static void scic_sds_port_abort_dummy_request(struct scic_sds_port *sci_port) * * This method will resume the port task scheduler for this port object. none */ -static void scic_sds_port_resume_port_task_scheduler( - struct scic_sds_port *this_port) +static void +scic_sds_port_resume_port_task_scheduler(struct scic_sds_port *port) { u32 pts_control_value; - pts_control_value = scu_port_task_scheduler_read(this_port, control); - + pts_control_value = readl(&port->port_task_scheduler_registers->control); pts_control_value &= ~SCU_PTSxCR_GEN_BIT(SUSPEND); - - scu_port_task_scheduler_write(this_port, control, pts_control_value); + writel(pts_control_value, &port->port_task_scheduler_registers->control); } /* @@ -1763,10 +1755,11 @@ static void scic_sds_port_ready_substate_operational_enter( isci_port_ready(ihost, iport); for (index = 0; index < SCI_MAX_PHYS; index++) { - if (sci_port->phy_table[index] != NULL) - scic_sds_port_write_phy_assignment( - sci_port, - sci_port->phy_table[index]); + if (sci_port->phy_table[index]) { + writel(sci_port->physical_port_index, + &sci_port->port_pe_configuration_register[ + sci_port->phy_table[index]->phy_index]); + } } scic_sds_port_update_viit_entry(sci_port); @@ -2308,16 +2301,14 @@ scic_sds_port_state_handler_table[SCI_BASE_PORT_MAX_STATES] = * This method will enable the SCU Port Task Scheduler for this port object but * will leave the port task scheduler in a suspended state. none */ -static void scic_sds_port_enable_port_task_scheduler( - struct scic_sds_port *this_port) +static void +scic_sds_port_enable_port_task_scheduler(struct scic_sds_port *port) { u32 pts_control_value; - pts_control_value = scu_port_task_scheduler_read(this_port, control); - + pts_control_value = readl(&port->port_task_scheduler_registers->control); pts_control_value |= SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND); - - scu_port_task_scheduler_write(this_port, control, pts_control_value); + writel(pts_control_value, &port->port_task_scheduler_registers->control); } /** @@ -2327,17 +2318,15 @@ static void scic_sds_port_enable_port_task_scheduler( * This method will disable the SCU port task scheduler for this port object. * none */ -static void scic_sds_port_disable_port_task_scheduler( - struct scic_sds_port *this_port) +static void +scic_sds_port_disable_port_task_scheduler(struct scic_sds_port *port) { u32 pts_control_value; - pts_control_value = scu_port_task_scheduler_read(this_port, control); - - pts_control_value &= ~(SCU_PTSxCR_GEN_BIT(ENABLE) - | SCU_PTSxCR_GEN_BIT(SUSPEND)); - - scu_port_task_scheduler_write(this_port, control, pts_control_value); + pts_control_value = readl(&port->port_task_scheduler_registers->control); + pts_control_value &= + ~(SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND)); + writel(pts_control_value, &port->port_task_scheduler_registers->control); } static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) @@ -2359,7 +2348,7 @@ static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) /* ensure hardware has seen the post rnc command and give it * ample time to act before sending the suspend */ - SMU_ISR_READ(scic); /* flush */ + readl(&scic->smu_registers->interrupt_status); /* flush */ udelay(10); command = SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX | @@ -2384,7 +2373,7 @@ static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci * controller and give it ample time to act before posting the rnc * invalidate */ - SMU_ISR_READ(scic); /* flush */ + readl(&scic->smu_registers->interrupt_status); /* flush */ udelay(10); command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE | diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index a5aa9e102242..4cd6bbb0b570 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -289,29 +289,6 @@ static inline void scic_sds_port_decrement_request_count(struct scic_sds_port *s sci_port->started_request_count--; } -/** - * scic_sds_port_write_phy_assignment() - - * - * Helper macro to write the phys port assignment - */ -#define scic_sds_port_write_phy_assignment(port, phy) \ - SCU_PCSPExCR_WRITE(\ - (port), \ - (phy)->phy_index, \ - (port)->physical_port_index \ - ) - -/** - * scic_sds_port_read_phy_assignment() - - * - * Helper macro to read the phys port assignment - */ -#define scic_sds_port_read_phy_assignment(port, phy) \ - SCU_PCSPExCR_READ(\ - (port), \ - (phy)->phy_index \ - ) - #define scic_sds_port_active_phy(port, phy) \ (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0) diff --git a/drivers/scsi/isci/core/scic_sds_port_registers.h b/drivers/scsi/isci/core/scic_sds_port_registers.h index dbe82d864eac..01e24e52990c 100644 --- a/drivers/scsi/isci/core/scic_sds_port_registers.h +++ b/drivers/scsi/isci/core/scic_sds_port_registers.h @@ -63,85 +63,4 @@ * */ -/** - * scu_port_task_scheduler_read() - - * - * Macro to read the port task scheduler register associated with this port - * object - */ -#define scu_port_task_scheduler_read(port, reg) \ - scu_register_read(\ - scic_sds_port_get_controller(port), \ - (port)->port_task_scheduler_registers->reg \ - ) - -/** - * scu_port_task_scheduler_write() - - * - * Macro to write the port task scheduler register associated with this port - * object - */ -#define scu_port_task_scheduler_write(port, reg, value) \ - scu_register_write(\ - scic_sds_port_get_controller(port), \ - (port)->port_task_scheduler_registers->reg, \ - (value) \ - ) - -#define scu_port_viit_register_write(port, reg, value) \ - scu_register_write(\ - scic_sds_port_get_controller(port), \ - (port)->viit_registers->reg, \ - (value) \ - ) - -/* - * **************************************************************************** - * * Port Task Scheduler registers controlled by the port object - * **************************************************************************** */ - -/** - * SCU_PTSxCR_READ() - - * - * Macro to read the port task scheduler control register - */ -#define SCU_PTSxCR_READ(port) \ - scu_port_task_scheduler_read(port, control) - -/** - * SCU_PTSxCR_WRITE() - - * - * Macro to write the port task scheduler control regsister - */ -#define SCU_PTSxCR_WRITE(port, value) \ - scu_port_task_scheduler_write(port, control, value) - -/* - * **************************************************************************** - * * Port PE Configuration registers - * **************************************************************************** */ - -/** - * SCU_PCSPExCR_WRITE() - - * - * Macro to write the PE Port Configuration Register - */ -#define SCU_PCSPExCR_WRITE(port, phy_id, value) \ - scu_register_write(\ - scic_sds_port_get_controller(port), \ - (port)->port_pe_configuration_register[phy_id], \ - (value) \ - ) - -/** - * SCU_PCSPExCR_READ() - - * - * Macro to read the PE Port Configuration Regsiter - */ -#define SCU_PCSPExCR_READ(port, phy_id) \ - scu_register_read(\ - scic_sds_port_get_controller(port), \ - (port)->port_pe_configuration_register[phy_id] \ - ) - #endif /* _SCIC_SDS_PORT_REGISTERS_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 45b8571726f7..d0cbb97b63a7 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -62,8 +62,7 @@ #include "scic_io_request.h" #include "scic_remote_device.h" #include "scic_sds_controller.h" -#include "scic_sds_controller_registers.h" -#include "scic_sds_pci.h" +#include "scu_registers.h" #include "scic_sds_port.h" #include "scic_sds_remote_device.h" #include "scic_sds_request.h" @@ -862,20 +861,16 @@ u32 scic_io_request_get_number_of_bytes_transferred( { u32 ret_val = 0; - if (SMU_AMR_READ(scic_sds_request->owning_controller) == 0) { + if (readl(&scic_sds_request->owning_controller->smu_registers->address_modifier) == 0) { /* * get the bytes of data from the Address == BAR1 + 20002Ch + (256*TCi) where * BAR1 is the scu_registers * 0x20002C = 0x200000 + 0x2c * = start of task context SRAM + offset of (type.ssp.data_offset) * TCi is the io_tag of struct scic_sds_request */ - ret_val = scic_sds_pci_read_scu_dword( - scic_sds_request->owning_controller, - ( - (u8 *)scic_sds_request->owning_controller->scu_registers + + ret_val = readl((u8 *)scic_sds_request->owning_controller->scu_registers + (SCU_TASK_CONTEXT_SRAM + SCI_FIELD_OFFSET(struct scu_task_context, type.ssp.data_offset)) + ((sizeof(struct scu_task_context)) * scic_sds_io_tag_get_index(scic_sds_request->io_tag)) - ) ); } diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c index 66be58b002d9..31a3516ddebe 100644 --- a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c +++ b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c @@ -315,10 +315,7 @@ enum sci_status scic_sds_unsolicited_frame_control_get_buffer( * @frame_index: This parameter specifies the frame index to attempt to release. * * This method returns an indication to the caller as to whether the - * unsolicited frame get pointer should be updated. true This value indicates - * the unsolicited frame get pointer should be updated (i.e. write - * SCU_UFQGP_WRITE). false This value indicates the get pointer should not be - * updated. + * unsolicited frame get pointer should be updated. */ bool scic_sds_unsolicited_frame_control_release_frame( struct scic_sds_unsolicited_frame_control *uf_control,