From: Peter Hurley Date: Sun, 28 Apr 2013 21:24:08 +0000 (+0200) Subject: firewire: ohci: Fix 'failed to read phy reg' on FW643 rev8 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=bd972688eb24;p=linux-beck.git firewire: ohci: Fix 'failed to read phy reg' on FW643 rev8 With the LSI FW643 rev 8 [1], the first commanded bus reset at the conclusion of ohci_enable() has been observed to fail with the following messages: [ 4.884015] firewire_ohci 0000:01:00.0: failed to read phy reg .... [ 5.684012] firewire_ohci 0000:01:00.0: failed to read phy reg With drivers/firewire/ohci.c instrumented, the error condition [2] indicates the PHY arbitration state machine has timed out prior to enabling PHY LCtrl. Furthermore, instrumenting ohci_enable() shows that LPS has been enabled within 1 ms. Test LPS latching every 1 ms rather than every 50ms. [1] lspci -v 01:00.0 FireWire (IEEE 1394): LSI Corporation FW643 [TrueFire] PCIe 1394b Controller (rev 08) (prog-if 10 [OHCI]) Subsystem: LSI Corporation FW643 [TrueFire] PCIe 1394b Controller Flags: bus master, fast devsel, latency 0, IRQ 92 Memory at fbeff000 (64-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 3 Capabilities: [4c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [170] Device Serial Number 08-14-43-82-00-00-41-fc Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci [2] instrumented WARNING in read_phy_reg() [ 4.576010] ------------[ cut here ]------------ [ 4.576035] WARNING: at ./drivers/firewire/ohci.c:570 read_phy_reg+0x93/0xe0 [firewire_ohci]() [ 4.576050] Hardware name: Precision WorkStation T5400 [ 4.576058] failed to read phy reg:1 (phy(5) @ config enhance:19) [ 4.576068] Modules linked in: hid_logitech_dj hid_generic(+) usbhid <...snip...> [ 4.576140] Pid: 61, comm: kworker/2:1 Not tainted 3.8.0-2+fwtest-xeon #2+fwtest [ 4.576149] Call Trace: [ 4.576160] [] warn_slowpath_common+0x7f/0xc0 [ 4.576168] [] warn_slowpath_fmt+0x46/0x50 [ 4.576178] [] read_phy_reg+0x93/0xe0 [firewire_ohci] [ 4.576188] [] ohci_read_phy_reg+0x39/0x60 [firewire_ohci] [ 4.576203] [] fw_send_phy_config+0xbf/0xe0 [firewire_core] [ 4.576214] [] br_work+0x46/0xb0 [firewire_core] [ 4.576225] [] process_one_work+0x13c/0x500 [ 4.576238] [] ? fw_card_initialize+0x180/0x180 [firewire_core] [ 4.576248] [] worker_thread+0x16d/0x470 [ 4.576257] [] ? busy_worker_rebind_fn+0x100/0x100 [ 4.576266] [] kthread+0xc0/0xd0 [ 4.576275] [] ? pcpu_dump_alloc_info+0x1cb/0x2c4 [ 4.576284] [] ? kthread_create_on_node+0x130/0x130 [ 4.576297] [] ret_from_fork+0x7c/0xb0 [ 4.576305] [] ? kthread_create_on_node+0x130/0x130 [ 4.576313] ---[ end trace cbc940994b300302 ]--- [Stefan R: Peter also reports a change of behavior with LSI FW323. Before the patch, there would often occur a lock transaction failure during firewire-core startup: [ 6.056022] firewire_core 0000:07:06.0: BM lock failed (timeout), making local node (ffc0) root This failure no longer happens after the patch, without an obvious reason for the failure or the fix.] [Stefan R: Added quirk flag, quirk table entry, and comment.] Reported-by: Tim Jordan Signed-off-by: Peter Hurley Signed-off-by: Stefan Richter --- diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index a309d89f4df7..77a64bf18029 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -284,6 +284,7 @@ static char ohci_driver_name[] = KBUILD_MODNAME; #define QUIRK_NO_MSI 16 #define QUIRK_TI_SLLZ059 32 #define QUIRK_IR_WAKE 64 +#define QUIRK_PHY_LCTRL_TIMEOUT 128 /* In case of multiple matches in ohci_quirks[], only the first one is used. */ static const struct { @@ -296,7 +297,10 @@ static const struct { QUIRK_BE_HEADERS}, {PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6, - QUIRK_NO_MSI}, + QUIRK_PHY_LCTRL_TIMEOUT | QUIRK_NO_MSI}, + + {PCI_VENDOR_ID_ATT, PCI_ANY_ID, PCI_ANY_ID, + QUIRK_PHY_LCTRL_TIMEOUT}, {PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_SB1394, PCI_ANY_ID, QUIRK_RESET_PACKET}, @@ -343,6 +347,7 @@ MODULE_PARM_DESC(quirks, "Chip quirks (default = 0" ", disable MSI = " __stringify(QUIRK_NO_MSI) ", TI SLLZ059 erratum = " __stringify(QUIRK_TI_SLLZ059) ", IR wake unreliable = " __stringify(QUIRK_IR_WAKE) + ", phy LCtrl timeout = " __stringify(QUIRK_PHY_LCTRL_TIMEOUT) ")"); #define OHCI_PARAM_DEBUG_AT_AR 1 @@ -2293,14 +2298,25 @@ static int ohci_enable(struct fw_card *card, * will lock up the machine. Wait 50msec to make sure we have * full link enabled. However, with some cards (well, at least * a JMicron PCIe card), we have to try again sometimes. + * + * TI TSB82AA2 + TSB81BA3(A) cards signal LPS enabled early but + * cannot actually use the phy at that time. These need tens of + * millisecods pause between LPS write and first phy access too. + * + * But do not wait for 50msec on Agere/LSI cards. Their phy + * arbitration state machine may time out during such a long wait. */ + reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS | OHCI1394_HCControl_postedWriteEnable); flush_writes(ohci); - for (lps = 0, i = 0; !lps && i < 3; i++) { + if (!(ohci->quirks & QUIRK_PHY_LCTRL_TIMEOUT)) msleep(50); + + for (lps = 0, i = 0; !lps && i < 150; i++) { + msleep(1); lps = reg_read(ohci, OHCI1394_HCControlSet) & OHCI1394_HCControl_LPS; }