From: Kevin Hilman <khilman@ti.com>
Date: Thu, 21 Apr 2011 15:44:45 +0000 (-0700)
Subject: gpio/omap: remove MPUIO handling from _clear_gpio_irqbank()
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=bdba15db4d81940776ab96ea9f558b7388b0f7fe;p=linux-beck.git

gpio/omap: remove MPUIO handling from _clear_gpio_irqbank()

Remove the OMAP1 #ifdef and MPUIO special case for _clear_gpio_irqbank()

The MPUIOs do not need a register access to ack/clear the IRQ status,
since reading the IRQ status clears it.  In addition, the MPUIO
irq_chip has an empty ack method, so _clear_gpio_irqbank() is never
used for MPUIOs.

Signed-off-by: Kevin Hilman <khilman@ti.com>
---

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 2ca814294c5e..7135810a77bc 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -657,12 +657,6 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	void __iomem *reg = bank->base;
 
 	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		/* MPUIO irqstatus is reset by reading the status register,
-		 * so do nothing here */
-		return;
-#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_STATUS;