From: Kuninori Morimoto Date: Thu, 18 Apr 2013 06:41:50 +0000 (-0700) Subject: ARM: shmobile: r8a7778: add GPIO support X-Git-Tag: next-20130521~8^2~1^2~6 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c031e161bcc61756016427463220236c6da1a757;p=karo-tx-linux.git ARM: shmobile: r8a7778: add GPIO support This patch was tested on Bock-W board Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 4c32784fde62..a02efceb5e34 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -102,17 +103,50 @@ void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata) pdata, sizeof(*pdata)); } -/* PFC */ +/* PFC/GPIO */ static struct resource pfc_resources[] = { DEFINE_RES_MEM(0xfffc0000, 0x118), }; +#define R8A7778_GPIO(idx) \ +static struct resource r8a7778_gpio##idx##_resources[] = { \ + DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \ + DEFINE_RES_IRQ(gic_iid(0x87)), \ +}; \ + \ +static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = { \ + .gpio_base = 32 * (idx), \ + .irq_base = GPIO_IRQ_BASE(idx), \ + .number_of_pins = 32, \ + .pctl_name = "pfc-r8a7778", \ +} + +R8A7778_GPIO(0); +R8A7778_GPIO(1); +R8A7778_GPIO(2); +R8A7778_GPIO(3); +R8A7778_GPIO(4); + +#define r8a7778_register_gpio(idx) \ + platform_device_register_resndata( \ + &platform_bus, "gpio_rcar", idx, \ + r8a7778_gpio##idx##_resources, \ + ARRAY_SIZE(r8a7778_gpio##idx##_resources), \ + &r8a7778_gpio##idx##_platform_data, \ + sizeof(r8a7778_gpio##idx##_platform_data)) + void __init r8a7778_pinmux_init(void) { platform_device_register_simple( "pfc-r8a7778", -1, pfc_resources, ARRAY_SIZE(pfc_resources)); + + r8a7778_register_gpio(0); + r8a7778_register_gpio(1); + r8a7778_register_gpio(2); + r8a7778_register_gpio(3); + r8a7778_register_gpio(4); } /* SDHI */