From: Laurent Pinchart Date: Fri, 19 Apr 2013 11:29:48 +0000 (+0200) Subject: ARM: shmobile: mackerel: Register pinctrl mapping for SCIF X-Git-Tag: next-20130527~8^2^13~86 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c18bfcfedfc65866c697e598fe5a32dd5af1809f;p=karo-tx-linux.git ARM: shmobile: mackerel: Register pinctrl mapping for SCIF Replace the GPIO-based SCIF pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 07eeb55b3df8..bd3666bc36e2 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1346,6 +1346,12 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = { "lcd_data24", "lcd"), PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372", "lcd_sync", "lcd"), + /* SCIFA0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372", + "scifa0_data", "scifa0"), + /* SCIFA2 (GT-720F GPS module) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh7372", + "scifa2_data", "scifa2"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", "sdhi0_data4", "sdhi0"), @@ -1414,10 +1420,6 @@ static void __init mackerel_init(void) ARRAY_SIZE(mackerel_pinctrl_map)); sh7372_pinmux_init(); - /* enable SCIFA0 */ - gpio_request(GPIO_FN_SCIFA0_TXD, NULL); - gpio_request(GPIO_FN_SCIFA0_RXD, NULL); - /* enable SMSC911X */ gpio_request(GPIO_FN_CS5A, NULL); gpio_request(GPIO_FN_IRQ6_39, NULL); @@ -1470,10 +1472,6 @@ static void __init mackerel_init(void) /* SDHI0 PORT172 card-detect IRQ26 */ gpio_request(GPIO_FN_IRQ26_172, NULL); - /* enable GPS module (GT-720F) */ - gpio_request(GPIO_FN_SCIFA2_TXD1, NULL); - gpio_request(GPIO_FN_SCIFA2_RXD1, NULL); - /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */ srcr4 = __raw_readl(SRCR4); __raw_writel(srcr4 | (1 << 13), SRCR4);