From: Holger Schurig Date: Wed, 2 Dec 2009 14:25:56 +0000 (+0100) Subject: libertas: use priv->mesh_tlv instead of priv->mesh_fw_ver X-Git-Tag: v2.6.34-rc1~233^2~705^2~22 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c24ef46e6b1597e54f185e0b48eb9073ef155a8c;p=karo-tx-linux.git libertas: use priv->mesh_tlv instead of priv->mesh_fw_ver Both variables contained the same information (no mesh, old mesh, new mesh). So we can get rid of one variable. Also move the mesh-version test from cmd.c into mesh.c. Signed-off-by: Holger Schurig Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index b9b371bfa30f..dd69191f24eb 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -143,19 +143,6 @@ int lbs_update_hw_spec(struct lbs_private *priv) lbs_deb_cmd("GET_HW_SPEC: hardware interface 0x%x, hardware spec 0x%04x\n", cmd.hwifversion, cmd.version); - /* Determine mesh_fw_ver from fwrelease and fwcapinfo */ - /* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */ - /* 5.110.22 have mesh command with 0xa3 command id */ - /* 10.0.0.p0 FW brings in mesh config command with different id */ - /* Check FW version MSB and initialize mesh_fw_ver */ - if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5) - priv->mesh_fw_ver = MESH_FW_OLD; - else if ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) && - (priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK)) - priv->mesh_fw_ver = MESH_FW_NEW; - else - priv->mesh_fw_ver = MESH_NONE; - /* Clamp region code to 8-bit since FW spec indicates that it should * only ever be 8-bit, even though the field size is 16-bit. Some firmware * returns non-zero high 8 bits here. diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h index 6b6ea9f7bf5b..ea3f10ef4e00 100644 --- a/drivers/net/wireless/libertas/defs.h +++ b/drivers/net/wireless/libertas/defs.h @@ -397,13 +397,6 @@ enum KEY_INFO_WPA { KEY_INFO_WPA_ENABLED = 0x04 }; -/** mesh_fw_ver */ -enum _mesh_fw_ver { - MESH_NONE = 0, /* MESH is not supported */ - MESH_FW_OLD, /* MESH is supported in FW V5 */ - MESH_FW_NEW, /* MESH is supported in FW V10 and newer */ -}; - /* Default values for fwt commands. */ #define FWT_DEFAULT_METRIC 0 #define FWT_DEFAULT_DIR 1 diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h index 6a8d2b291d8c..505b8feaa8b4 100644 --- a/drivers/net/wireless/libertas/dev.h +++ b/drivers/net/wireless/libertas/dev.h @@ -42,7 +42,6 @@ struct lbs_private { u32 mesh_connect_status; struct lbs_mesh_stats mstats; int mesh_open; - int mesh_fw_ver; int mesh_autostart_enabled; uint16_t mesh_tlv; u8 mesh_ssid[IEEE80211_MAX_SSID_LEN + 1]; diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c index 2f91c9b808af..1d94f7d4efc8 100644 --- a/drivers/net/wireless/libertas/mesh.c +++ b/drivers/net/wireless/libertas/mesh.c @@ -196,7 +196,12 @@ int lbs_init_mesh(struct lbs_private *priv) lbs_deb_enter(LBS_DEB_MESH); - if (priv->mesh_fw_ver == MESH_FW_OLD) { + /* Determine mesh_fw_ver from fwrelease and fwcapinfo */ + /* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */ + /* 5.110.22 have mesh command with 0xa3 command id */ + /* 10.0.0.p0 FW brings in mesh config command with different id */ + /* Check FW version MSB and initialize mesh_fw_ver */ + if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5) { /* Enable mesh, if supported, and work out which TLV it uses. 0x100 + 291 is an unofficial value used in 5.110.20.pXX 0x100 + 37 is the official value used in 5.110.21.pXX @@ -218,7 +223,9 @@ int lbs_init_mesh(struct lbs_private *priv) priv->channel)) priv->mesh_tlv = 0; } - } else if (priv->mesh_fw_ver == MESH_FW_NEW) { + } else + if ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) && + (priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK)) { /* 10.0.0.pXX new firmwares should succeed with TLV * 0x100+37; Do not invoke command with old TLV. */ @@ -227,6 +234,8 @@ int lbs_init_mesh(struct lbs_private *priv) priv->channel)) priv->mesh_tlv = 0; } + + if (priv->mesh_tlv) { lbs_add_mesh(priv); @@ -416,10 +425,10 @@ struct net_device *lbs_mesh_set_dev(struct lbs_private *priv, struct net_device *dev, struct rxpd *rxpd) { if (priv->mesh_dev) { - if (priv->mesh_fw_ver == MESH_FW_OLD) { + if (priv->mesh_tlv == TLV_TYPE_OLD_MESH_ID) { if (rxpd->rx_control & RxPD_MESH_FRAME) dev = priv->mesh_dev; - } else if (priv->mesh_fw_ver == MESH_FW_NEW) { + } else if (priv->mesh_tlv == TLV_TYPE_MESH_ID) { if (rxpd->u.bss.bss_num == MESH_IFACE_ID) dev = priv->mesh_dev; } @@ -432,9 +441,9 @@ void lbs_mesh_set_txpd(struct lbs_private *priv, struct net_device *dev, struct txpd *txpd) { if (dev == priv->mesh_dev) { - if (priv->mesh_fw_ver == MESH_FW_OLD) + if (priv->mesh_tlv == TLV_TYPE_OLD_MESH_ID) txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME); - else if (priv->mesh_fw_ver == MESH_FW_NEW) + else if (priv->mesh_tlv == TLV_TYPE_MESH_ID) txpd->u.bss.bss_num = MESH_IFACE_ID; } } @@ -538,7 +547,7 @@ static int __lbs_mesh_config_send(struct lbs_private *priv, * Command id is 0xac for v10 FW along with mesh interface * id in bits 14-13-12. */ - if (priv->mesh_fw_ver == MESH_FW_NEW) + if (priv->mesh_tlv == TLV_TYPE_MESH_ID) command = CMD_MESH_CONFIG | (MESH_IFACE_ID << MESH_IFACE_BIT_OFFSET);