From: Johannes Berg Date: Fri, 25 Nov 2011 19:11:43 +0000 (-0800) Subject: iwlagn: remove calibration knowledge X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c27bdc84d6310914cfdd59280c2e663588392d01;p=linux-beck.git iwlagn: remove calibration knowledge The init microcode knows very well which calibrations are required and sends us results for those that are. Consequently, we can just send all of those to the RT uCode again. The problem with having the driver know about this is that it is a uCode feature, not a hardware feature so the config is completely unsuitable. The only thing we need to check is whether the device needs crystal calibration or not, add a new parameter to the configuration for that. This makes new uCode work on 6000 series devices. Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index e12b48c2cff6..bc9bbbb2b494 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -147,16 +147,7 @@ static int iwl1000_hw_set_hw_params(struct iwl_priv *priv) iwl1000_set_ct_threshold(priv); /* Set initial sensitivity parameters */ - /* Set initial calibration set */ hw_params(priv).sens = &iwl1000_sensitivity; - hw_params(priv).calib_init_cfg = - BIT(IWL_CALIB_XTAL) | - BIT(IWL_CALIB_LO) | - BIT(IWL_CALIB_TX_IQ) | - BIT(IWL_CALIB_TX_IQ_PERD) | - BIT(IWL_CALIB_BASE_BAND); - if (priv->cfg->need_dc_calib) - hw_params(priv).calib_init_cfg |= BIT(IWL_CALIB_DC); return 0; } diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c index b3193571ed07..0c4688d95b65 100644 --- a/drivers/net/wireless/iwlwifi/iwl-2000.c +++ b/drivers/net/wireless/iwlwifi/iwl-2000.c @@ -143,17 +143,7 @@ static int iwl2000_hw_set_hw_params(struct iwl_priv *priv) iwl2000_set_ct_threshold(priv); /* Set initial sensitivity parameters */ - /* Set initial calibration set */ hw_params(priv).sens = &iwl2000_sensitivity; - hw_params(priv).calib_init_cfg = - BIT(IWL_CALIB_XTAL) | - BIT(IWL_CALIB_LO) | - BIT(IWL_CALIB_TX_IQ) | - BIT(IWL_CALIB_BASE_BAND); - if (priv->cfg->need_dc_calib) - hw_params(priv).calib_rt_cfg |= IWL_CALIB_CFG_DC_IDX; - if (priv->cfg->need_temp_offset_calib) - hw_params(priv).calib_init_cfg |= BIT(IWL_CALIB_TEMP_OFFSET); return 0; } @@ -258,7 +248,6 @@ static struct iwl_bt_params iwl2030_bt_params = { .eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \ .lib = &iwl2000_lib, \ .base_params = &iwl2000_base_params, \ - .need_dc_calib = true, \ .need_temp_offset_calib = true, \ .temp_offset_v2 = true, \ .led_mode = IWL_LED_RF_STATE, \ @@ -286,7 +275,6 @@ struct iwl_cfg iwl2000_2bgn_d_cfg = { .lib = &iwl2030_lib, \ .base_params = &iwl2030_base_params, \ .bt_params = &iwl2030_bt_params, \ - .need_dc_calib = true, \ .need_temp_offset_calib = true, \ .temp_offset_v2 = true, \ .led_mode = IWL_LED_RF_STATE, \ @@ -308,7 +296,6 @@ struct iwl_cfg iwl2030_2bgn_cfg = { .eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \ .lib = &iwl2000_lib, \ .base_params = &iwl2000_base_params, \ - .need_dc_calib = true, \ .need_temp_offset_calib = true, \ .temp_offset_v2 = true, \ .led_mode = IWL_LED_RF_STATE, \ @@ -338,7 +325,6 @@ struct iwl_cfg iwl105_bgn_d_cfg = { .lib = &iwl2030_lib, \ .base_params = &iwl2030_base_params, \ .bt_params = &iwl2030_bt_params, \ - .need_dc_calib = true, \ .need_temp_offset_calib = true, \ .temp_offset_v2 = true, \ .led_mode = IWL_LED_RF_STATE, \ diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index c511c98a89a8..3a3f83032382 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -186,14 +186,7 @@ static int iwl5000_hw_set_hw_params(struct iwl_priv *priv) iwl5000_set_ct_threshold(priv); /* Set initial sensitivity parameters */ - /* Set initial calibration set */ hw_params(priv).sens = &iwl5000_sensitivity; - hw_params(priv).calib_init_cfg = - BIT(IWL_CALIB_XTAL) | - BIT(IWL_CALIB_LO) | - BIT(IWL_CALIB_TX_IQ) | - BIT(IWL_CALIB_TX_IQ_PERD) | - BIT(IWL_CALIB_BASE_BAND); return 0; } @@ -222,14 +215,7 @@ static int iwl5150_hw_set_hw_params(struct iwl_priv *priv) iwl5150_set_ct_threshold(priv); /* Set initial sensitivity parameters */ - /* Set initial calibration set */ hw_params(priv).sens = &iwl5150_sensitivity; - hw_params(priv).calib_init_cfg = - BIT(IWL_CALIB_LO) | - BIT(IWL_CALIB_TX_IQ) | - BIT(IWL_CALIB_BASE_BAND); - if (priv->cfg->need_dc_calib) - hw_params(priv).calib_init_cfg |= BIT(IWL_CALIB_DC); return 0; } @@ -433,7 +419,7 @@ struct iwl_cfg iwl5350_agn_cfg = { .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION, \ .lib = &iwl5150_lib, \ .base_params = &iwl5000_base_params, \ - .need_dc_calib = true, \ + .no_xtal_calib = true, \ .led_mode = IWL_LED_BLINK, \ .internal_wimax_coex = true diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index ee3363fdf309..09f037824f81 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -164,17 +164,7 @@ static int iwl6000_hw_set_hw_params(struct iwl_priv *priv) iwl6000_set_ct_threshold(priv); /* Set initial sensitivity parameters */ - /* Set initial calibration set */ hw_params(priv).sens = &iwl6000_sensitivity; - hw_params(priv).calib_init_cfg = - BIT(IWL_CALIB_XTAL) | - BIT(IWL_CALIB_LO) | - BIT(IWL_CALIB_TX_IQ) | - BIT(IWL_CALIB_BASE_BAND); - if (priv->cfg->need_dc_calib) - hw_params(priv).calib_rt_cfg |= IWL_CALIB_CFG_DC_IDX; - if (priv->cfg->need_temp_offset_calib) - hw_params(priv).calib_init_cfg |= BIT(IWL_CALIB_TEMP_OFFSET); return 0; } @@ -364,7 +354,6 @@ static struct iwl_bt_params iwl6000_bt_params = { .eeprom_calib_ver = EEPROM_6005_TX_POWER_VERSION, \ .lib = &iwl6000_lib, \ .base_params = &iwl6000_g2_base_params, \ - .need_dc_calib = true, \ .need_temp_offset_calib = true, \ .led_mode = IWL_LED_RF_STATE @@ -406,7 +395,6 @@ struct iwl_cfg iwl6005_2agn_d_cfg = { .lib = &iwl6030_lib, \ .base_params = &iwl6000_g2_base_params, \ .bt_params = &iwl6000_bt_params, \ - .need_dc_calib = true, \ .need_temp_offset_calib = true, \ .led_mode = IWL_LED_RF_STATE, \ .adv_pm = true \ @@ -506,7 +494,6 @@ struct iwl_cfg iwl6000i_2bg_cfg = { .eeprom_ver = EEPROM_6050_EEPROM_VERSION, \ .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \ .base_params = &iwl6050_base_params, \ - .need_dc_calib = true, \ .led_mode = IWL_LED_BLINK, \ .internal_wimax_coex = true @@ -530,7 +517,6 @@ struct iwl_cfg iwl6050_2abg_cfg = { .eeprom_ver = EEPROM_6150_EEPROM_VERSION, \ .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, \ .base_params = &iwl6050_base_params, \ - .need_dc_calib = true, \ .led_mode = IWL_LED_BLINK, \ .internal_wimax_coex = true @@ -555,7 +541,6 @@ struct iwl_cfg iwl6000_3agn_cfg = { .lib = &iwl6000_lib, .base_params = &iwl6000_base_params, .ht_params = &iwl6000_ht_params, - .need_dc_calib = true, .led_mode = IWL_LED_BLINK, }; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c index 03bac48558b2..c7bcafabb3b3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c @@ -84,30 +84,28 @@ struct statistics_general_data { int iwl_send_calib_results(struct iwl_priv *priv) { - int ret = 0; - int i = 0; - struct iwl_host_cmd hcmd = { .id = REPLY_PHY_CALIBRATION_CMD, .flags = CMD_SYNC, }; + int i = 0; for (i = 0; i < IWL_CALIB_MAX; i++) { - if ((BIT(i) & hw_params(priv).calib_init_cfg) && - priv->calib_results[i].buf) { - hcmd.len[0] = priv->calib_results[i].buf_len; - hcmd.data[0] = priv->calib_results[i].buf; - hcmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY; - ret = iwl_trans_send_cmd(trans(priv), &hcmd); - if (ret) { - IWL_ERR(priv, "Error %d iteration %d\n", - ret, i); - break; - } + int ret; + + if (!priv->calib_results[i].buf) + continue; + hcmd.len[0] = priv->calib_results[i].buf_len; + hcmd.data[0] = priv->calib_results[i].buf; + hcmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY; + ret = iwl_trans_send_cmd(trans(priv), &hcmd); + if (ret) { + IWL_ERR(priv, "Error %d iteration %d\n", ret, i); + return ret; } } - return ret; + return 0; } int iwl_calib_set(struct iwl_calib_result *res, const u8 *buf, int len) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c index 9ec315b31d45..7043fdb13986 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c @@ -477,9 +477,11 @@ static int iwlagn_alive_notify(struct iwl_priv *priv) if (ret) return ret; - ret = iwlagn_set_Xtal_calib(priv); - if (ret) - return ret; + if (!priv->cfg->no_xtal_calib) { + ret = iwlagn_set_Xtal_calib(priv); + if (ret) + return ret; + } return iwl_send_calib_results(priv); } diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index fa47f75185df..f1d9d0c13e4c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -184,8 +184,9 @@ struct iwl_ht_params { * @ht_params: point to ht patameters * @bt_params: pointer to bt parameters * @pa_type: used by 6000 series only to identify the type of Power Amplifier - * @need_dc_calib: need to perform init dc calibration * @need_temp_offset_calib: need to perform temperature offset calibration + * @no_xtal_calib: some devices do not need crystal calibration data, + * don't send it to those * @scan_antennas: available antenna for scan operation * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off) * @adv_pm: advance power management @@ -222,8 +223,8 @@ struct iwl_cfg { struct iwl_ht_params *ht_params; struct iwl_bt_params *bt_params; enum iwl_pa_type pa_type; /* if used set to IWL_PA_SYSTEM */ - const bool need_dc_calib; /* if used set to true */ const bool need_temp_offset_calib; /* if used set to true */ + const bool no_xtal_calib; u8 scan_rx_antennas[IEEE80211_NUM_BANDS]; enum iwl_led_mode led_mode; const bool adv_pm; diff --git a/drivers/net/wireless/iwlwifi/iwl-shared.h b/drivers/net/wireless/iwlwifi/iwl-shared.h index 1f7a93c67c45..47be77a8a0a7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-shared.h +++ b/drivers/net/wireless/iwlwifi/iwl-shared.h @@ -174,7 +174,6 @@ struct iwl_mod_params { * @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit * relevant for 1000, 6000 and up * @wd_timeout: TX queues watchdog timeout - * @calib_init_cfg: setup initial calibrations for the hw * @calib_rt_cfg: setup runtime calibrations for the hw * @struct iwl_sensitivity_ranges: range of sensitivity values */ @@ -195,7 +194,6 @@ struct iwl_hw_params { u32 ct_kill_exit_threshold; unsigned int wd_timeout; - u32 calib_init_cfg; u32 calib_rt_cfg; const struct iwl_sensitivity_ranges *sens; };