From: Shanyu Zhao Date: Wed, 14 Apr 2010 22:35:14 +0000 (-0700) Subject: iwlwifi: set correct AC to swq_id for aggregation X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c2845d010b0e58a17cd2301e657b614962331550;p=mv-sheeva.git iwlwifi: set correct AC to swq_id for aggregation When starting an aggregation session, the swq_id is generated in function iwl_virtual_agg_queue_num() where the first parameter is supposed to be the Access Class, but it used the tx fifo ID instead. This means the AC value stored in swq_id is incorrect. To test this, look at the tx_queue file in debugfs while transmitting Best Effort flow (ac=2), it shows: hwq 10: read=0 write=0 stop=0 swq_id=0xa9 (ac 1/hwq 10) After this fix, it will show: hwq 10: read=0 write=0 stop=0 swq_id=0xaa (ac 2/hwq 10) Signed-off-by: Shanyu Zhao Signed-off-by: Reinette Chatre --- diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c index 11661fa28f2..95e263f1d11 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c @@ -83,6 +83,15 @@ static inline int get_fifo_from_ac(u8 ac) return ac_to_fifo[ac]; } +static inline int get_ac_from_tid(u16 tid) +{ + if (likely(tid < ARRAY_SIZE(tid_to_ac))) + return tid_to_ac[tid]; + + /* no support for TIDs 8-15 yet */ + return -EINVAL; +} + static inline int get_fifo_from_tid(u16 tid) { if (likely(tid < ARRAY_SIZE(tid_to_ac))) @@ -991,7 +1000,7 @@ int iwlagn_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn) tid_data = &priv->stations[sta_id].tid[tid]; *ssn = SEQ_TO_SN(tid_data->seq_number); tid_data->agg.txq_id = txq_id; - priv->txq[txq_id].swq_id = iwl_virtual_agg_queue_num(tx_fifo, txq_id); + priv->txq[txq_id].swq_id = iwl_virtual_agg_queue_num(get_ac_from_tid(tid), txq_id); spin_unlock_irqrestore(&priv->sta_lock, flags); ret = priv->cfg->ops->lib->txq_agg_enable(priv, txq_id, tx_fifo,