From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Date: Wed, 21 Oct 2015 04:57:44 +0000 (-0700)
Subject: ARM: dts: qcom: msm8974-honami: Define pinctrl state for blsp_uart2
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c2e1445c2a25ccc28054200ef3921decbfae4bf9;p=linux-beck.git

ARM: dts: qcom: msm8974-honami: Define pinctrl state for blsp_uart2

Make sure the blsp1_uart2 pins are in the correct state for the uart.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <agross@codeaurora.org>
---

diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 016f9ad9392a..6f7e4ef4ccf7 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -23,6 +23,29 @@
 &soc {
 	serial@f991e000 {
 		status = "ok";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&blsp1_uart2_pin_a>;
+	};
+
+	pinctrl@fd510000 {
+		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
+			rx {
+				pins = "gpio5";
+				function = "blsp_uart2";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			tx {
+				pins = "gpio4";
+				function = "blsp_uart2";
+
+				drive-strength = <4>;
+				bias-disable;
+			};
+		};
 	};
 };