From: Florian Vaussard <florian.vaussard@epfl.ch>
Date: Fri, 7 Mar 2014 19:22:17 +0000 (+0100)
Subject: ARM: dts: omap3-tobi: Use include file omap-gpmc-smsc9221
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c3fba2d05b4d87aae6380e81b118a6b82bfcfa5a;p=linux-beck.git

ARM: dts: omap3-tobi: Use include file omap-gpmc-smsc9221

Use the timings provided by omap-gpmc-smsc9221. This does not change
the timings, but it avoids code duplication.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---

diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
index 7375cda0f5c9..e7f2ac76c226 100644
--- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -19,18 +19,6 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
-
-	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
 };
 
 &omap3_pmx_core {
@@ -42,39 +30,15 @@
 	};
 };
 
+#include "omap-gpmc-smsc9221.dtsi"
+
 &gpmc {
 	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
 
-	ethernet@5,0 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
+	ethernet@gpmc {
 		reg = <5 0 0xff>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <42>;
-		gpmc,cs-wr-off-ns = <36>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <12>;
-		gpmc,adv-wr-off-ns = <12>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <42>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <36>;
-		gpmc,rd-cycle-ns = <60>;
-		gpmc,wr-cycle-ns = <54>;
-		gpmc,access-ns = <36>;
-		gpmc,page-burst-access-ns = <0>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <18>;
-		gpmc,wr-access-ns = <42>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
 		interrupt-parent = <&gpio6>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
-		reg-io-width = <4>;
 	};
 };