From: Troy Kisky Date: Tue, 17 Dec 2013 01:12:54 +0000 (-0700) Subject: ARM: dts: imx6qdl-sabrelite: move spi-nor CS to pinctrl_ecspi1 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c40f58aa7bbc13ac8134a2a4fbdbae9fbdc159e0;p=linux-beck.git ARM: dts: imx6qdl-sabrelite: move spi-nor CS to pinctrl_ecspi1 This patch moves pin EIM_D19 (CS) from pinctrl_hog to pinctrl_ecspi1. It also explicitly sets the pad to 0x000b1. Before this patch, it has the value 0x100b1 if using mainline u-boot. So this patch also removes hysteresis since the pad is always an output. Signed-off-by: Troy Kisky Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index b4646c46f02d..895d4d6810c4 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -114,7 +114,6 @@ imx6q-sabrelite { pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000 @@ -135,6 +134,7 @@ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */ >; };