From: Mike Rapoport Date: Wed, 10 Feb 2016 16:34:02 +0000 (+0200) Subject: staging: sm750fb: programModeRegisters: rename local vairables X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c436e6ba7eefdd0a75903283fec726888fd6ef5d;p=linux-beck.git staging: sm750fb: programModeRegisters: rename local vairables Remove HungarianCamelCase notation. Signed-off-by: Mike Rapoport Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c index d0e3935654ff..e7fc2391c856 100644 --- a/drivers/staging/sm750fb/ddk750_mode.c +++ b/drivers/staging/sm750fb/ddk750_mode.c @@ -79,7 +79,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll) { int ret = 0; int cnt = 0; - unsigned int ulTmpValue, ulReg; + unsigned int tmp, reg; if (pll->clockType == SECONDARY_PLL) { /* programe secondary pixel clock */ @@ -101,26 +101,27 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll) | FIELD_VALUE(0, CRT_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1)); - ulTmpValue = FIELD_VALUE(0, CRT_DISPLAY_CTRL, VSYNC_PHASE, pModeParam->vertical_sync_polarity) | + tmp = FIELD_VALUE(0, CRT_DISPLAY_CTRL, VSYNC_PHASE, + pModeParam->vertical_sync_polarity) | FIELD_VALUE(0, CRT_DISPLAY_CTRL, HSYNC_PHASE, pModeParam->horizontal_sync_polarity) | FIELD_SET(0, CRT_DISPLAY_CTRL, TIMING, ENABLE) | FIELD_SET(0, CRT_DISPLAY_CTRL, PLANE, ENABLE); if (getChipType() == SM750LE) { - displayControlAdjust_SM750LE(pModeParam, ulTmpValue); + displayControlAdjust_SM750LE(pModeParam, tmp); } else { - ulReg = PEEK32(CRT_DISPLAY_CTRL) + reg = PEEK32(CRT_DISPLAY_CTRL) & FIELD_CLEAR(CRT_DISPLAY_CTRL, VSYNC_PHASE) & FIELD_CLEAR(CRT_DISPLAY_CTRL, HSYNC_PHASE) & FIELD_CLEAR(CRT_DISPLAY_CTRL, TIMING) & FIELD_CLEAR(CRT_DISPLAY_CTRL, PLANE); - POKE32(CRT_DISPLAY_CTRL, ulTmpValue | ulReg); + POKE32(CRT_DISPLAY_CTRL, tmp | reg); } } else if (pll->clockType == PRIMARY_PLL) { - unsigned int ulReservedBits; + unsigned int reserved; POKE32(PANEL_PLL_CTRL, formatPllReg(pll)); @@ -140,18 +141,20 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll) FIELD_VALUE(0, PANEL_VERTICAL_SYNC, HEIGHT, pModeParam->vertical_sync_height) | FIELD_VALUE(0, PANEL_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1)); - ulTmpValue = FIELD_VALUE(0, PANEL_DISPLAY_CTRL, VSYNC_PHASE, pModeParam->vertical_sync_polarity) | + tmp = FIELD_VALUE(0, PANEL_DISPLAY_CTRL, VSYNC_PHASE, + pModeParam->vertical_sync_polarity) | FIELD_VALUE(0, PANEL_DISPLAY_CTRL, HSYNC_PHASE, pModeParam->horizontal_sync_polarity) | FIELD_VALUE(0, PANEL_DISPLAY_CTRL, CLOCK_PHASE, pModeParam->clock_phase_polarity) | FIELD_SET(0, PANEL_DISPLAY_CTRL, TIMING, ENABLE) | FIELD_SET(0, PANEL_DISPLAY_CTRL, PLANE, ENABLE); - ulReservedBits = FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_1_MASK, ENABLE) | + reserved = FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_1_MASK, + ENABLE) | FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_2_MASK, ENABLE) | FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_3_MASK, ENABLE) | FIELD_SET(0, PANEL_DISPLAY_CTRL, VSYNC, ACTIVE_LOW); - ulReg = (PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) + reg = (PEEK32(PANEL_DISPLAY_CTRL) & ~reserved) & FIELD_CLEAR(PANEL_DISPLAY_CTRL, CLOCK_PHASE) & FIELD_CLEAR(PANEL_DISPLAY_CTRL, VSYNC_PHASE) & FIELD_CLEAR(PANEL_DISPLAY_CTRL, HSYNC_PHASE) @@ -167,13 +170,14 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll) * next vertical sync to turn on/off the plane. */ - POKE32(PANEL_DISPLAY_CTRL, ulTmpValue | ulReg); + POKE32(PANEL_DISPLAY_CTRL, tmp | reg); - while ((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) != (ulTmpValue | ulReg)) { + while ((PEEK32(PANEL_DISPLAY_CTRL) & ~reserved) != + (tmp | reg)) { cnt++; if (cnt > 1000) break; - POKE32(PANEL_DISPLAY_CTRL, ulTmpValue | ulReg); + POKE32(PANEL_DISPLAY_CTRL, tmp | reg); } } else { ret = -1;