From: Zang Roy-r61911 Date: Tue, 13 Jun 2006 07:07:15 +0000 (+0800) Subject: [POWERPC] Add general support for mpc7448hpc2 (Taiga) platform X-Git-Tag: v2.6.18-rc1~358^2~8 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c5d56332fd6c;p=karo-tx-linux.git [POWERPC] Add general support for mpc7448hpc2 (Taiga) platform Add support for Freescale mpc7448 (Taiga) board support Signed-off-by: Roy Zang Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index baec4e3ff832..0b5e225c2d51 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -336,7 +336,7 @@ config PPC_ISERIES config EMBEDDED6xx bool "Embedded 6xx/7xx/7xxx-based board" - depends on PPC32 && BROKEN + depends on PPC32 && (BROKEN||BROKEN_ON_SMP) config APUS bool "Amiga-APUS" @@ -436,7 +436,8 @@ config U3_DART default n config MPIC - depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP + depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP \ + || MPC7448HPC2 bool default y @@ -821,7 +822,8 @@ config MCA bool config PCI - bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) + bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) \ + || MPC7448HPC2 default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS default PCI_QSPAN if !4xx && !CPM2 && 8xx diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 6e67b5b49ba1..3a9b78d03542 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -302,6 +302,17 @@ void __init find_legacy_serial_ports(void) of_node_put(isa); } + /* First fill our array with tsi-bridge ports */ + for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16550")) != NULL;) { + struct device_node *tsi = of_get_parent(np); + if (tsi && !strcmp(tsi->type, "tsi-bridge")) { + index = add_legacy_soc_port(np, np); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + } + of_node_put(tsi); + } + #ifdef CONFIG_PCI /* Next, try to locate PCI ports */ for (np = NULL; (np = of_find_all_nodes(np));) { diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 292863694562..5cf46dc57895 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -14,3 +14,4 @@ obj-$(CONFIG_PPC_PSERIES) += pseries/ obj-$(CONFIG_PPC_ISERIES) += iseries/ obj-$(CONFIG_PPC_MAPLE) += maple/ obj-$(CONFIG_PPC_CELL) += cell/ +obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/ diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 4fdbc9ae876b..ba07a9a7c039 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -74,6 +74,16 @@ config SANDPOINT Select SANDPOINT if configuring for a Motorola Sandpoint X3 (any flavor). +config MPC7448HPC2 + bool "Freescale MPC7448HPC2(Taiga)" + select TSI108_BRIDGE + select DEFAULT_UIMAGE + select PPC_UDBG_16550 + select MPIC + help + Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga) + platform + config RADSTONE_PPC7D bool "Radstone Technology PPC7D board" select PPC_I8259 @@ -221,6 +231,11 @@ config MV64X60 select PPC_INDIRECT_PCI default y +config TSI108_BRIDGE + bool + depends on MPC7448HPC2 + default y + menu "Set bridge options" depends on MV64X60 diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile new file mode 100644 index 000000000000..fa499fe59291 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/Makefile @@ -0,0 +1,4 @@ +# +# Makefile for the 6xx/7xx/7xxxx linux kernel. +# +obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c new file mode 100644 index 000000000000..d7a4fc7ca238 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -0,0 +1,335 @@ +/* + * mpc7448_hpc2.c + * + * Board setup routines for the Freescale Taiga platform + * + * Author: Jacob Pan + * jacob.pan@freescale.com + * Author: Xianghua Xiao + * x.xiao@freescale.com + * Maintainer: Roy Zang + * Add Flat Device Tree support fot mpc7448hpc2 board + * + * Copyright 2004-2006 Freescale Semiconductor, Inc. + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "mpc7448_hpc2.h" +#include +#include + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) do { printk(fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + +#ifndef CONFIG_PCI +isa_io_base = MPC7448_HPC2_ISA_IO_BASE; +isa_mem_base = MPC7448_HPC2_ISA_MEM_BASE; +pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET; +#endif + +extern int tsi108_setup_pci(struct device_node *dev); +extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); +extern void tsi108_pci_int_init(void); +extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused); + +/* + * Define all of the IRQ senses and polarities. Taken from the + * mpc7448hpc manual. + * Note: Likely, this table and the following function should be + * obtained and derived from the OF Device Tree. + */ + +static u_char mpc7448_hpc2_pic_initsenses[] __initdata = { + /* External on-board sources */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */ + /* Internal Tsi108/109 interrupt sources */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */ +}; + +int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +/* + * find pci slot by devfn in interrupt map of OF tree + */ +u8 find_slot_by_devfn(unsigned int *interrupt_map, unsigned int devfn) +{ + int i; + unsigned int tmp; + for (i = 0; i < 4; i++){ + tmp = interrupt_map[i*4*7]; + if ((tmp >> 11) == (devfn >> 3)) + return i; + } + return i; +} + +/* + * Scans the interrupt map for pci device + */ +void mpc7448_hpc2_fixup_irq(struct pci_dev *dev) +{ + struct pci_controller *hose; + struct device_node *node; + unsigned int *interrupt; + int busnr; + int len; + u8 slot; + u8 pin; + + /* Lookup the hose */ + busnr = dev->bus->number; + hose = pci_bus_to_hose(busnr); + if (!hose) + printk(KERN_ERR "No pci hose found\n"); + + /* Check it has an OF node associated */ + node = (struct device_node *) hose->arch_data; + if (!node) + printk(KERN_ERR "No pci node found\n"); + + interrupt = (unsigned int *) get_property(node, "interrupt-map", &len); + slot = find_slot_by_devfn(interrupt, dev->devfn); + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (pin == 0 || pin > 4) + pin = 1; + pin--; + dev->irq = interrupt[slot*4*7 + pin*7 + 5]; + DBG("TSI_PCI: dev->irq = 0x%x\n", dev->irq); +} +/* temporary pci irq map fixup*/ + +void __init mpc7448_hpc2_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + for_each_pci_dev(dev) { + mpc7448_hpc2_fixup_irq(dev); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } +} + +static void __init mpc7448_hpc2_setup_arch(void) +{ + struct device_node *cpu; + struct device_node *np; + if (ppc_md.progress) + ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0); + + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu != 0) { + unsigned int *fp; + + fp = (int *)get_property(cpu, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(cpu); + } + tsi108_csr_vir_base = get_vir_csrbase(); + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + +#ifdef CONFIG_BLK_DEV_INITRD + ROOT_DEV = Root_RAM0; +#endif + + /* setup PCI host bridge */ +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + tsi108_setup_pci(np); + + ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device; + if (ppc_md.progress) + ppc_md.progress("tsi108: resources set", 0x100); +#endif + + printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n"); + printk(KERN_INFO + "Jointly ported by Freescale and Tundra Semiconductor\n"); + printk(KERN_INFO + "Enabling L2 cache then enabling the HID0 prefetch engine.\n"); +} + +/* + * Interrupt setup and service. Interrrupts on the mpc7448_hpc2 come + * from the four external INT pins, PCI interrupts are routed via + * PCI interrupt control registers, it generates internal IRQ23 + * + * Interrupt routing on the Taiga Board: + * TSI108:PB_INT[0] -> CPU0:INT# + * TSI108:PB_INT[1] -> CPU0:MCP# + * TSI108:PB_INT[2] -> N/C + * TSI108:PB_INT[3] -> N/C + */ +static void __init mpc7448_hpc2_init_IRQ(void) +{ + struct mpic *mpic; + phys_addr_t mpic_paddr = 0; + struct device_node *tsi_pic; + + tsi_pic = of_find_node_by_type(NULL, "open-pic"); + if (tsi_pic) { + unsigned int size; + void *prop = get_property(tsi_pic, "reg", &size); + mpic_paddr = of_translate_address(tsi_pic, prop); + } + + if (mpic_paddr == 0) { + printk("%s: No tsi108 PIC found !\n", __FUNCTION__); + return; + } + + DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__, + (u32) mpic_paddr); + + mpic = mpic_alloc(mpic_paddr, + MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | + MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108), + 0, /* num_sources used */ + TSI108_IRQ_BASE, + 0, /* num_sources used */ + NR_IRQS - 4 /* XXXX */, + mpc7448_hpc2_pic_initsenses, + sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC"); + + BUG_ON(mpic == NULL); /* XXXX */ + + mpic_init(mpic); + mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic); + tsi108_pci_int_init(); + + /* Configure MPIC outputs to CPU0 */ + tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); +} + +void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: Freescale Semiconductor\n"); + seq_printf(m, "machine\t\t: MPC7448hpc2\n"); +} + +void mpc7448_hpc2_restart(char *cmd) +{ + local_irq_disable(); + + /* Set exception prefix high - to the firmware */ + _nmask_and_or_msr(0, MSR_IP); + + for (;;) ; /* Spin until reset happens */ +} + +void mpc7448_hpc2_power_off(void) +{ + local_irq_disable(); + for (;;) ; /* No way to shut power off with software */ +} + +void mpc7448_hpc2_halt(void) +{ + mpc7448_hpc2_power_off(); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mpc7448_hpc2_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "mpc74xx")) + return 0; + return 1; +} + +static int mpc7448_machine_check_exception(struct pt_regs *regs) +{ + extern void tsi108_clear_pci_cfg_error(void); + const struct exception_table_entry *entry; + + /* Are we prepared to handle this fault */ + if ((entry = search_exception_tables(regs->nip)) != NULL) { + tsi108_clear_pci_cfg_error(); + regs->msr |= MSR_RI; + regs->nip = entry->fixup; + return 1; + } + return 0; + +} +define_machine(mpc7448_hpc2){ + .name = "MPC7448 HPC2", + .probe = mpc7448_hpc2_probe, + .setup_arch = mpc7448_hpc2_setup_arch, + .init_IRQ = mpc7448_hpc2_init_IRQ, + .show_cpuinfo = mpc7448_hpc2_show_cpuinfo, + .get_irq = mpic_get_irq, + .pcibios_fixup = mpc7448_hpc2_pcibios_fixup, + .restart = mpc7448_hpc2_restart, + .calibrate_decr = generic_calibrate_decr, + .machine_check_exception= mpc7448_machine_check_exception, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h new file mode 100644 index 000000000000..a543a5242e34 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h @@ -0,0 +1,26 @@ +/* + * mpc7448_hpc2.h + * + * Definitions for Freescale MPC7448_HPC2 platform + * + * Author: Jacob Pan + * jacob.pan@freescale.com + * Maintainer: Roy Zang + * + * 2006 (c) Freescale Semiconductor, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __PPC_PLATFORMS_MPC7448_HPC2_H +#define __PPC_PLATFORMS_MPC7448_HPC2_H + +#include + +/* Base Addresses for the PCI bus + */ +#define MPC7448_HPC2_PCI_MEM_OFFSET (0x00000000) +#define MPC7448_HPC2_ISA_IO_BASE (0x00000000) +#define MPC7448_HPC2_ISA_MEM_BASE (0x00000000) +#endif /* __PPC_PLATFORMS_MPC7448_HPC2_H */