From: Kelvin Cheung Date: Fri, 10 Oct 2014 03:40:02 +0000 (+0800) Subject: MIPS: Loongson1B: Add a clockevent/clocksource using PWM Timer X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c5d58e9e79dd8d687454915fc4e845434f973175;p=linux-beck.git MIPS: Loongson1B: Add a clockevent/clocksource using PWM Timer This patch add a clockevent/clocksource using PWM Timer for Loongson1B, which is based on earlier work by Tang, Haifeng. Signed-off-by: Kelvin Cheung Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8025/ Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/loongson1/Kconfig b/arch/mips/loongson1/Kconfig index 4ed9744fe051..a2b796eaf3c3 100644 --- a/arch/mips/loongson1/Kconfig +++ b/arch/mips/loongson1/Kconfig @@ -5,8 +5,8 @@ choice config LOONGSON1_LS1B bool "Loongson LS1B board" - select CEVT_R4K - select CSRC_R4K + select CEVT_R4K if !MIPS_EXTERNAL_TIMER + select CSRC_R4K if !MIPS_EXTERNAL_TIMER select SYS_HAS_CPU_LOONGSON1B select DMA_NONCOHERENT select BOOT_ELF32 @@ -21,4 +21,41 @@ config LOONGSON1_LS1B endchoice +menuconfig CEVT_CSRC_LS1X + bool "Use PWM Timer for clockevent/clocksource" + select MIPS_EXTERNAL_TIMER + depends on CPU_LOONGSON1 + help + This option changes the default clockevent/clocksource to PWM Timer, + and is required by Loongson1 CPUFreq support. + + If unsure, say N. + +choice + prompt "Select clockevent/clocksource" + depends on CEVT_CSRC_LS1X + default TIMER_USE_PWM0 + +config TIMER_USE_PWM0 + bool "Use PWM Timer 0" + help + Use PWM Timer 0 as the default clockevent/clocksourcer. + +config TIMER_USE_PWM1 + bool "Use PWM Timer 1" + help + Use PWM Timer 1 as the default clockevent/clocksourcer. + +config TIMER_USE_PWM2 + bool "Use PWM Timer 2" + help + Use PWM Timer 2 as the default clockevent/clocksourcer. + +config TIMER_USE_PWM3 + bool "Use PWM Timer 3" + help + Use PWM Timer 3 as the default clockevent/clocksourcer. + +endchoice + endif # MACH_LOONGSON1 diff --git a/arch/mips/loongson1/common/Makefile b/arch/mips/loongson1/common/Makefile index b2797709ef5b..723b4ce3b8f0 100644 --- a/arch/mips/loongson1/common/Makefile +++ b/arch/mips/loongson1/common/Makefile @@ -2,4 +2,4 @@ # Makefile for common code of loongson1 based machines. # -obj-y += clock.o irq.o platform.o prom.o reset.o setup.o +obj-y += time.o irq.o platform.o prom.o reset.o setup.o diff --git a/arch/mips/loongson1/common/clock.c b/arch/mips/loongson1/common/clock.c deleted file mode 100644 index b4437f19c3d9..000000000000 --- a/arch/mips/loongson1/common/clock.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (c) 2011 Zhang, Keguang - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include - -void __init plat_time_init(void) -{ - struct clk *clk; - - /* Initialize LS1X clocks */ - ls1x_clk_init(); - - /* setup mips r4k timer */ - clk = clk_get(NULL, "cpu"); - if (IS_ERR(clk)) - panic("unable to get cpu clock, err=%ld", PTR_ERR(clk)); - - mips_hpt_frequency = clk_get_rate(clk) / 2; -} diff --git a/arch/mips/loongson1/common/time.c b/arch/mips/loongson1/common/time.c new file mode 100644 index 000000000000..df0f850d6a5f --- /dev/null +++ b/arch/mips/loongson1/common/time.c @@ -0,0 +1,226 @@ +/* + * Copyright (c) 2014 Zhang, Keguang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include + +#include +#include + +#ifdef CONFIG_CEVT_CSRC_LS1X + +#if defined(CONFIG_TIMER_USE_PWM1) +#define LS1X_TIMER_BASE LS1X_PWM1_BASE +#define LS1X_TIMER_IRQ LS1X_PWM1_IRQ + +#elif defined(CONFIG_TIMER_USE_PWM2) +#define LS1X_TIMER_BASE LS1X_PWM2_BASE +#define LS1X_TIMER_IRQ LS1X_PWM2_IRQ + +#elif defined(CONFIG_TIMER_USE_PWM3) +#define LS1X_TIMER_BASE LS1X_PWM3_BASE +#define LS1X_TIMER_IRQ LS1X_PWM3_IRQ + +#else +#define LS1X_TIMER_BASE LS1X_PWM0_BASE +#define LS1X_TIMER_IRQ LS1X_PWM0_IRQ +#endif + +DEFINE_RAW_SPINLOCK(ls1x_timer_lock); + +static void __iomem *timer_base; +static uint32_t ls1x_jiffies_per_tick; + +static inline void ls1x_pwmtimer_set_period(uint32_t period) +{ + __raw_writel(period, timer_base + PWM_HRC); + __raw_writel(period, timer_base + PWM_LRC); +} + +static inline void ls1x_pwmtimer_restart(void) +{ + __raw_writel(0x0, timer_base + PWM_CNT); + __raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL); +} + +void __init ls1x_pwmtimer_init(void) +{ + timer_base = ioremap(LS1X_TIMER_BASE, 0xf); + if (!timer_base) + panic("Failed to remap timer registers"); + + ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ); + + ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick); + ls1x_pwmtimer_restart(); +} + +static cycle_t ls1x_clocksource_read(struct clocksource *cs) +{ + unsigned long flags; + int count; + u32 jifs; + static int old_count; + static u32 old_jifs; + + raw_spin_lock_irqsave(&ls1x_timer_lock, flags); + /* + * Although our caller may have the read side of xtime_lock, + * this is now a seqlock, and we are cheating in this routine + * by having side effects on state that we cannot undo if + * there is a collision on the seqlock and our caller has to + * retry. (Namely, old_jifs and old_count.) So we must treat + * jiffies as volatile despite the lock. We read jiffies + * before latching the timer count to guarantee that although + * the jiffies value might be older than the count (that is, + * the counter may underflow between the last point where + * jiffies was incremented and the point where we latch the + * count), it cannot be newer. + */ + jifs = jiffies; + /* read the count */ + count = __raw_readl(timer_base + PWM_CNT); + + /* + * It's possible for count to appear to go the wrong way for this + * reason: + * + * The timer counter underflows, but we haven't handled the resulting + * interrupt and incremented jiffies yet. + * + * Previous attempts to handle these cases intelligently were buggy, so + * we just do the simple thing now. + */ + if (count < old_count && jifs == old_jifs) + count = old_count; + + old_count = count; + old_jifs = jifs; + + raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags); + + return (cycle_t) (jifs * ls1x_jiffies_per_tick) + count; +} + +static struct clocksource ls1x_clocksource = { + .name = "ls1x-pwmtimer", + .read = ls1x_clocksource_read, + .mask = CLOCKSOURCE_MASK(24), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static irqreturn_t ls1x_clockevent_isr(int irq, void *devid) +{ + struct clock_event_device *cd = devid; + + ls1x_pwmtimer_restart(); + cd->event_handler(cd); + + return IRQ_HANDLED; +} + +static void ls1x_clockevent_set_mode(enum clock_event_mode mode, + struct clock_event_device *cd) +{ + raw_spin_lock(&ls1x_timer_lock); + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick); + ls1x_pwmtimer_restart(); + case CLOCK_EVT_MODE_RESUME: + __raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL); + break; + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_SHUTDOWN: + __raw_writel(__raw_readl(timer_base + PWM_CTRL) & ~CNT_EN, + timer_base + PWM_CTRL); + break; + default: + break; + } + raw_spin_unlock(&ls1x_timer_lock); +} + +static int ls1x_clockevent_set_next(unsigned long evt, + struct clock_event_device *cd) +{ + raw_spin_lock(&ls1x_timer_lock); + ls1x_pwmtimer_set_period(evt); + ls1x_pwmtimer_restart(); + raw_spin_unlock(&ls1x_timer_lock); + + return 0; +} + +static struct clock_event_device ls1x_clockevent = { + .name = "ls1x-pwmtimer", + .features = CLOCK_EVT_FEAT_PERIODIC, + .rating = 300, + .irq = LS1X_TIMER_IRQ, + .set_next_event = ls1x_clockevent_set_next, + .set_mode = ls1x_clockevent_set_mode, +}; + +static struct irqaction ls1x_pwmtimer_irqaction = { + .name = "ls1x-pwmtimer", + .handler = ls1x_clockevent_isr, + .dev_id = &ls1x_clockevent, + .flags = IRQF_PERCPU | IRQF_TIMER, +}; + +static void __init ls1x_time_init(void) +{ + struct clock_event_device *cd = &ls1x_clockevent; + int ret; + + if (!mips_hpt_frequency) + panic("Invalid timer clock rate"); + + ls1x_pwmtimer_init(); + + clockevent_set_clock(cd, mips_hpt_frequency); + cd->max_delta_ns = clockevent_delta2ns(0xffffff, cd); + cd->min_delta_ns = clockevent_delta2ns(0x000300, cd); + cd->cpumask = cpumask_of(smp_processor_id()); + clockevents_register_device(cd); + + ls1x_clocksource.rating = 200 + mips_hpt_frequency / 10000000; + ret = clocksource_register_hz(&ls1x_clocksource, mips_hpt_frequency); + if (ret) + panic(KERN_ERR "Failed to register clocksource: %d\n", ret); + + setup_irq(LS1X_TIMER_IRQ, &ls1x_pwmtimer_irqaction); +} +#endif /* CONFIG_CEVT_CSRC_LS1X */ + +void __init plat_time_init(void) +{ + struct clk *clk = NULL; + + /* initialize LS1X clocks */ + ls1x_clk_init(); + +#ifdef CONFIG_CEVT_CSRC_LS1X + /* setup LS1X PWM timer */ + clk = clk_get(NULL, "ls1x_pwmtimer"); + if (IS_ERR(clk)) + panic("unable to get timer clock, err=%ld", PTR_ERR(clk)); + + mips_hpt_frequency = clk_get_rate(clk); + ls1x_time_init(); +#else + /* setup mips r4k timer */ + clk = clk_get(NULL, "cpu_clk"); + if (IS_ERR(clk)) + panic("unable to get cpu clock, err=%ld", PTR_ERR(clk)); + + mips_hpt_frequency = clk_get_rate(clk) / 2; +#endif /* CONFIG_CEVT_CSRC_LS1X */ +}