From: H Hartley Sweeten Date: Mon, 14 Jul 2014 19:24:04 +0000 (-0700) Subject: staging: comedi: ni_mio_common: tidy up the gpct counter subdevice init X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c607b3317e562bfe322c98c38e0c9e7852366b35;p=linux-beck.git staging: comedi: ni_mio_common: tidy up the gpct counter subdevice init For aesthetics, add some whitespace to the subdevice init and tidy it up a bit. Unfortunately we can't get rid of the '#ifdef PCIDMA' here yet due to other ifdefery in this file. For now just add the correct test so that the async command support is not hooked up unless we have an IRQ and DMA. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c index 4932b4db83ad..6545f11fe669 100644 --- a/drivers/staging/comedi/drivers/ni_mio_common.c +++ b/drivers/staging/comedi/drivers/ni_mio_common.c @@ -5490,7 +5490,6 @@ static int ni_E_init(struct comedi_device *dev, const struct ni_board_struct *board = comedi_board(dev); struct ni_private *devpriv = dev->private; struct comedi_subdevice *s; - enum ni_gpct_variant counter_variant; int ret; int i; @@ -5735,44 +5734,47 @@ static int ni_E_init(struct comedi_device *dev, s->insn_config = ni_rtsi_insn_config; ni_rtsi_init(dev); - if (devpriv->is_m_series) - counter_variant = ni_gpct_variant_m_series; - else - counter_variant = ni_gpct_variant_e_series; + /* allocate and initialize the gpct counter device */ devpriv->counter_dev = ni_gpct_device_construct(dev, - &ni_gpct_write_register, - &ni_gpct_read_register, - counter_variant, - NUM_GPCT); + ni_gpct_write_register, + ni_gpct_read_register, + (devpriv->is_m_series) + ? ni_gpct_variant_m_series + : ni_gpct_variant_e_series, + NUM_GPCT); if (!devpriv->counter_dev) return -ENOMEM; - /* General purpose counters */ + /* Counter (gpct) subdevices */ for (i = 0; i < NUM_GPCT; ++i) { + struct ni_gpct *gpct = &devpriv->counter_dev->counters[i]; + + /* setup and initialize the counter */ + gpct->chip_index = 0; + gpct->counter_index = i; + ni_tio_init_counter(gpct); + s = &dev->subdevices[NI_GPCT_SUBDEV(i)]; - s->type = COMEDI_SUBD_COUNTER; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL; - s->n_chan = 3; - if (devpriv->is_m_series) - s->maxdata = 0xffffffff; - else - s->maxdata = 0xffffff; - s->insn_read = ni_tio_insn_read; - s->insn_write = ni_tio_insn_read; - s->insn_config = ni_tio_insn_config; + s->type = COMEDI_SUBD_COUNTER; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL; + s->n_chan = 3; + s->maxdata = (devpriv->is_m_series) ? 0xffffffff + : 0x00ffffff; + s->insn_read = ni_tio_insn_read; + s->insn_write = ni_tio_insn_read; + s->insn_config = ni_tio_insn_config; #ifdef PCIDMA - s->subdev_flags |= SDF_CMD_READ /* | SDF_CMD_WRITE */; - s->do_cmd = &ni_gpct_cmd; - s->len_chanlist = 1; - s->do_cmdtest = ni_tio_cmdtest; - s->cancel = &ni_gpct_cancel; - s->async_dma_dir = DMA_BIDIRECTIONAL; -#endif - s->private = &devpriv->counter_dev->counters[i]; + if (dev->irq && devpriv->mite) { + s->subdev_flags |= SDF_CMD_READ /* | SDF_CMD_WRITE */; + s->len_chanlist = 1; + s->do_cmdtest = ni_tio_cmdtest; + s->do_cmd = ni_gpct_cmd; + s->cancel = ni_gpct_cancel; - devpriv->counter_dev->counters[i].chip_index = 0; - devpriv->counter_dev->counters[i].counter_index = i; - ni_tio_init_counter(&devpriv->counter_dev->counters[i]); + s->async_dma_dir = DMA_BIDIRECTIONAL; + } +#endif + s->private = gpct; } /* Frequency output */