From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon, 9 Jan 2012 12:14:56 +0000 (+0100)
Subject: usb: gadget: dummy_hcd: initialize max_streams early
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c688419141ad6134d7973fcf182e3719e98d7491;p=mv-sheeva.git

usb: gadget: dummy_hcd: initialize max_streams early

While playing with uasp I noticed that it does not work with dummy_hcd.
The problem is that uasp requires a stream capable endpoint which it is
requesting at bind time like every other gadget. dummy_hcd however
initializes the max_stream value after connect once it knows if it runs
at SS or not.
I don't think that it is might be wrong to initialize the stream
capability even at HS speed. The gadget may not use this descriptor at
HS speed so it should not cause any damage.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---

diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index db815c2da7e..5a21bf5c765 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -800,17 +800,10 @@ static int dummy_set_selfpowered (struct usb_gadget *_gadget, int value)
 
 static void dummy_udc_udpate_ep0(struct dummy *dum)
 {
-	u32 i;
-
-	if (dum->gadget.speed == USB_SPEED_SUPER) {
-		for (i = 0; i < DUMMY_ENDPOINTS; i++)
-			dum->ep[i].ep.max_streams = 0x10;
+	if (dum->gadget.speed == USB_SPEED_SUPER)
 		dum->ep[0].ep.maxpacket = 9;
-	} else {
-		for (i = 0; i < DUMMY_ENDPOINTS; i++)
-			dum->ep[i].ep.max_streams = 0;
+	else
 		dum->ep[0].ep.maxpacket = 64;
-	}
 }
 
 static int dummy_pullup (struct usb_gadget *_gadget, int value)
@@ -954,6 +947,7 @@ static void init_dummy_udc_hw(struct dummy *dum)
 		ep->halted = ep->wedged = ep->already_seen =
 				ep->setup_stage = 0;
 		ep->ep.maxpacket = ~0;
+		ep->ep.max_streams = 16;
 		ep->last_io = jiffies;
 		ep->gadget = &dum->gadget;
 		ep->desc = NULL;