From: Jeff Garzik Date: Thu, 10 Aug 2006 11:31:37 +0000 (-0400) Subject: Move libata to drivers/ata. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c6fd280766a050b13360d7c2d59a3d6bd3a27d9a;p=linux-beck.git Move libata to drivers/ata. --- diff --git a/drivers/Kconfig b/drivers/Kconfig index 8b11cebe65df..263e86ddc1a4 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -18,6 +18,8 @@ source "drivers/ide/Kconfig" source "drivers/scsi/Kconfig" +source "drivers/ata/Kconfig" + source "drivers/cdrom/Kconfig" source "drivers/md/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index fc2d744a4e4a..4ac14dab3079 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_PPC_PMAC) += macintosh/ obj-$(CONFIG_IDE) += ide/ obj-$(CONFIG_FC4) += fc4/ obj-$(CONFIG_SCSI) += scsi/ +obj-$(CONFIG_ATA) += ata/ obj-$(CONFIG_FUSION) += message/ obj-$(CONFIG_IEEE1394) += ieee1394/ obj-y += cdrom/ diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig new file mode 100644 index 000000000000..95d6b417af65 --- /dev/null +++ b/drivers/ata/Kconfig @@ -0,0 +1,140 @@ + +config ATA + tristate "ATA device support" + depends on SCSI + ---help--- + If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or + any other ATA device under Linux, say Y and make sure that you know + the name of your ATA host adapter (the card inside your computer + that "speaks" the ATA protocol, also called ATA controller), + because you will be asked for it. + +config SCSI_SATA_AHCI + tristate "AHCI SATA support" + depends on ATA && PCI + help + This option enables support for AHCI Serial ATA. + + If unsure, say N. + +config SCSI_SATA_SVW + tristate "ServerWorks Frodo / Apple K2 SATA support" + depends on ATA && PCI + help + This option enables support for Broadcom/Serverworks/Apple K2 + SATA support. + + If unsure, say N. + +config SCSI_ATA_PIIX + tristate "Intel PIIX/ICH SATA support" + depends on ATA && PCI + help + This option enables support for ICH5/6/7/8 Serial ATA. + If PATA support was enabled previously, this enables + support for select Intel PIIX/ICH PATA host controllers. + + If unsure, say N. + +config SCSI_SATA_MV + tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" + depends on ATA && PCI && EXPERIMENTAL + help + This option enables support for the Marvell Serial ATA family. + Currently supports 88SX[56]0[48][01] chips. + + If unsure, say N. + +config SCSI_SATA_NV + tristate "NVIDIA SATA support" + depends on ATA && PCI + help + This option enables support for NVIDIA Serial ATA. + + If unsure, say N. + +config SCSI_PDC_ADMA + tristate "Pacific Digital ADMA support" + depends on ATA && PCI + help + This option enables support for Pacific Digital ADMA controllers + + If unsure, say N. + +config SCSI_SATA_QSTOR + tristate "Pacific Digital SATA QStor support" + depends on ATA && PCI + help + This option enables support for Pacific Digital Serial ATA QStor. + + If unsure, say N. + +config SCSI_SATA_PROMISE + tristate "Promise SATA TX2/TX4 support" + depends on ATA && PCI + help + This option enables support for Promise Serial ATA TX2/TX4. + + If unsure, say N. + +config SCSI_SATA_SX4 + tristate "Promise SATA SX4 support" + depends on ATA && PCI && EXPERIMENTAL + help + This option enables support for Promise Serial ATA SX4. + + If unsure, say N. + +config SCSI_SATA_SIL + tristate "Silicon Image SATA support" + depends on ATA && PCI + help + This option enables support for Silicon Image Serial ATA. + + If unsure, say N. + +config SCSI_SATA_SIL24 + tristate "Silicon Image 3124/3132 SATA support" + depends on ATA && PCI + help + This option enables support for Silicon Image 3124/3132 Serial ATA. + + If unsure, say N. + +config SCSI_SATA_SIS + tristate "SiS 964/180 SATA support" + depends on ATA && PCI + help + This option enables support for SiS Serial ATA 964/180. + + If unsure, say N. + +config SCSI_SATA_ULI + tristate "ULi Electronics SATA support" + depends on ATA && PCI + help + This option enables support for ULi Electronics SATA. + + If unsure, say N. + +config SCSI_SATA_VIA + tristate "VIA SATA support" + depends on ATA && PCI + help + This option enables support for VIA Serial ATA. + + If unsure, say N. + +config SCSI_SATA_VITESSE + tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" + depends on ATA && PCI + help + This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. + + If unsure, say N. + +config SCSI_SATA_INTEL_COMBINED + bool + depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX) + default y + diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile new file mode 100644 index 000000000000..60bdb7b2b5ca --- /dev/null +++ b/drivers/ata/Makefile @@ -0,0 +1,19 @@ + +obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o +obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o +obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o +obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o +obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o +obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o +obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o +obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o +obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o +obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o +obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o +obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o +obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o +obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o +obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o + +libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o + diff --git a/drivers/scsi/ahci.c b/drivers/ata/ahci.c similarity index 100% rename from drivers/scsi/ahci.c rename to drivers/ata/ahci.c diff --git a/drivers/scsi/ata_piix.c b/drivers/ata/ata_piix.c similarity index 100% rename from drivers/scsi/ata_piix.c rename to drivers/ata/ata_piix.c diff --git a/drivers/scsi/libata-bmdma.c b/drivers/ata/libata-bmdma.c similarity index 100% rename from drivers/scsi/libata-bmdma.c rename to drivers/ata/libata-bmdma.c diff --git a/drivers/scsi/libata-core.c b/drivers/ata/libata-core.c similarity index 99% rename from drivers/scsi/libata-core.c rename to drivers/ata/libata-core.c index 3f963f206d4a..7d786fba4d82 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/ata/libata-core.c @@ -50,7 +50,6 @@ #include #include #include -#include "scsi_priv.h" #include #include #include diff --git a/drivers/scsi/libata-eh.c b/drivers/ata/libata-eh.c similarity index 99% rename from drivers/scsi/libata-eh.c rename to drivers/ata/libata-eh.c index 29f59345305d..2c476eee463f 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -39,7 +39,7 @@ #include #include #include -#include "scsi_transport_api.h" +#include "../scsi/scsi_transport_api.h" #include diff --git a/drivers/scsi/libata-scsi.c b/drivers/ata/libata-scsi.c similarity index 100% rename from drivers/scsi/libata-scsi.c rename to drivers/ata/libata-scsi.c diff --git a/drivers/scsi/libata.h b/drivers/ata/libata.h similarity index 100% rename from drivers/scsi/libata.h rename to drivers/ata/libata.h diff --git a/drivers/scsi/pdc_adma.c b/drivers/ata/pdc_adma.c similarity index 100% rename from drivers/scsi/pdc_adma.c rename to drivers/ata/pdc_adma.c diff --git a/drivers/scsi/sata_mv.c b/drivers/ata/sata_mv.c similarity index 100% rename from drivers/scsi/sata_mv.c rename to drivers/ata/sata_mv.c diff --git a/drivers/scsi/sata_nv.c b/drivers/ata/sata_nv.c similarity index 100% rename from drivers/scsi/sata_nv.c rename to drivers/ata/sata_nv.c diff --git a/drivers/scsi/sata_promise.c b/drivers/ata/sata_promise.c similarity index 100% rename from drivers/scsi/sata_promise.c rename to drivers/ata/sata_promise.c diff --git a/drivers/scsi/sata_promise.h b/drivers/ata/sata_promise.h similarity index 100% rename from drivers/scsi/sata_promise.h rename to drivers/ata/sata_promise.h diff --git a/drivers/scsi/sata_qstor.c b/drivers/ata/sata_qstor.c similarity index 100% rename from drivers/scsi/sata_qstor.c rename to drivers/ata/sata_qstor.c diff --git a/drivers/scsi/sata_sil.c b/drivers/ata/sata_sil.c similarity index 100% rename from drivers/scsi/sata_sil.c rename to drivers/ata/sata_sil.c diff --git a/drivers/scsi/sata_sil24.c b/drivers/ata/sata_sil24.c similarity index 100% rename from drivers/scsi/sata_sil24.c rename to drivers/ata/sata_sil24.c diff --git a/drivers/scsi/sata_sis.c b/drivers/ata/sata_sis.c similarity index 100% rename from drivers/scsi/sata_sis.c rename to drivers/ata/sata_sis.c diff --git a/drivers/scsi/sata_svw.c b/drivers/ata/sata_svw.c similarity index 100% rename from drivers/scsi/sata_svw.c rename to drivers/ata/sata_svw.c diff --git a/drivers/scsi/sata_sx4.c b/drivers/ata/sata_sx4.c similarity index 100% rename from drivers/scsi/sata_sx4.c rename to drivers/ata/sata_sx4.c diff --git a/drivers/scsi/sata_uli.c b/drivers/ata/sata_uli.c similarity index 100% rename from drivers/scsi/sata_uli.c rename to drivers/ata/sata_uli.c diff --git a/drivers/scsi/sata_via.c b/drivers/ata/sata_via.c similarity index 100% rename from drivers/scsi/sata_via.c rename to drivers/ata/sata_via.c diff --git a/drivers/scsi/sata_vsc.c b/drivers/ata/sata_vsc.c similarity index 100% rename from drivers/scsi/sata_vsc.c rename to drivers/ata/sata_vsc.c diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 96a81cd17617..2df4d15c9634 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -471,67 +471,6 @@ config SCSI_IN2000 source "drivers/scsi/megaraid/Kconfig.megaraid" -config SCSI_SATA - tristate "Serial ATA (SATA) support" - depends on SCSI - help - This driver family supports Serial ATA host controllers - and devices. - - If unsure, say N. - -config SCSI_SATA_AHCI - tristate "AHCI SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for AHCI Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SVW - tristate "ServerWorks Frodo / Apple K2 SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for Broadcom/Serverworks/Apple K2 - SATA support. - - If unsure, say N. - -config SCSI_ATA_PIIX - tristate "Intel PIIX/ICH SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for ICH5/6/7/8 Serial ATA. - If PATA support was enabled previously, this enables - support for select Intel PIIX/ICH PATA host controllers. - - If unsure, say N. - -config SCSI_SATA_MV - tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for the Marvell Serial ATA family. - Currently supports 88SX[56]0[48][01] chips. - - If unsure, say N. - -config SCSI_SATA_NV - tristate "NVIDIA SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for NVIDIA Serial ATA. - - If unsure, say N. - -config SCSI_PDC_ADMA - tristate "Pacific Digital ADMA support" - depends on SCSI_SATA && PCI - help - This option enables support for Pacific Digital ADMA controllers - - If unsure, say N. - config SCSI_HPTIOP tristate "HighPoint RocketRAID 3xxx Controller support" depends on SCSI && PCI @@ -542,83 +481,6 @@ config SCSI_HPTIOP To compile this driver as a module, choose M here; the module will be called hptiop. If unsure, say N. -config SCSI_SATA_QSTOR - tristate "Pacific Digital SATA QStor support" - depends on SCSI_SATA && PCI - help - This option enables support for Pacific Digital Serial ATA QStor. - - If unsure, say N. - -config SCSI_SATA_PROMISE - tristate "Promise SATA TX2/TX4 support" - depends on SCSI_SATA && PCI - help - This option enables support for Promise Serial ATA TX2/TX4. - - If unsure, say N. - -config SCSI_SATA_SX4 - tristate "Promise SATA SX4 support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Promise Serial ATA SX4. - - If unsure, say N. - -config SCSI_SATA_SIL - tristate "Silicon Image SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Silicon Image Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SIL24 - tristate "Silicon Image 3124/3132 SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Silicon Image 3124/3132 Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SIS - tristate "SiS 964/180 SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for SiS Serial ATA 964/180. - - If unsure, say N. - -config SCSI_SATA_ULI - tristate "ULi Electronics SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for ULi Electronics SATA. - - If unsure, say N. - -config SCSI_SATA_VIA - tristate "VIA SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for VIA Serial ATA. - - If unsure, say N. - -config SCSI_SATA_VITESSE - tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. - - If unsure, say N. - -config SCSI_SATA_INTEL_COMBINED - bool - depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX) - default y - config SCSI_BUSLOGIC tristate "BusLogic SCSI support" depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index ebd0cf00bf3e..b678f957cfe2 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -122,21 +122,6 @@ obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o obj-$(CONFIG_SCSI_NSP32) += nsp32.o obj-$(CONFIG_SCSI_IPR) += ipr.o obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/ -obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o -obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o -obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o -obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o -obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o -obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o -obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o -obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o -obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o -obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o -obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o -obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o -obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o -obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o -obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o obj-$(CONFIG_ARM) += arm/ @@ -166,7 +151,6 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \ CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m) zalon7xx-objs := zalon.o ncr53c8xx.o NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o -libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o # Files generated that shall be removed upon make clean