From: Albert Lee Date: Tue, 4 Oct 2005 10:03:45 +0000 (-0400) Subject: libata: move atapi_send_cdb() and ata_dataout_task() X-Git-Tag: v2.6.18-rc1~1079^2~98^2~13^2~98 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c71c18576d0d8aa4db876c737c3c597c724cf02f;p=karo-tx-linux.git libata: move atapi_send_cdb() and ata_dataout_task() to be near ata_pio_*() functions --- diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 546336802579..ff291b365108 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2781,6 +2781,114 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) local_irq_restore(flags); } +/** + * atapi_send_cdb - Write CDB bytes to hardware + * @ap: Port to which ATAPI device is attached. + * @qc: Taskfile currently active + * + * When device has indicated its readiness to accept + * a CDB, this function is called. Send the CDB. + * + * LOCKING: + * caller. + */ + +static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + /* send SCSI cdb */ + DPRINTK("send cdb\n"); + assert(ap->cdb_len >= 12); + + ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); + ata_altstatus(ap); /* flush */ + + switch (qc->tf.protocol) { + case ATA_PROT_ATAPI: + ap->hsm_task_state = HSM_ST; + break; + case ATA_PROT_ATAPI_NODATA: + ap->hsm_task_state = HSM_ST_LAST; + break; + case ATA_PROT_ATAPI_DMA: + ap->hsm_task_state = HSM_ST_LAST; + /* initiate bmdma */ + ap->ops->bmdma_start(qc); + break; + } +} + +/** + * ata_dataout_task - Write first data block to hardware + * @_data: Port to which ATA/ATAPI device is attached. + * + * When device has indicated its readiness to accept + * the data, this function sends out the CDB or + * the first data block by PIO. + * After this, + * - If polling, ata_pio_task() handles the rest. + * - Otherwise, interrupt handler takes over. + * + * LOCKING: + * Kernel thread context (may sleep) + */ + +static void ata_dataout_task(void *_data) +{ + struct ata_port *ap = _data; + struct ata_queued_cmd *qc; + u8 status; + unsigned long flags; + + qc = ata_qc_from_tag(ap, ap->active_tag); + assert(qc != NULL); + assert(qc->flags & ATA_QCFLAG_ACTIVE); + + /* sleep-wait for BSY to clear */ + DPRINTK("busy wait\n"); + if (ata_busy_sleep(ap, ATA_TMOUT_DATAOUT_QUICK, ATA_TMOUT_DATAOUT)) + goto err_out; + + /* make sure DRQ is set */ + status = ata_chk_status(ap); + if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) + goto err_out; + + /* Send the CDB (atapi) or the first data block (ata pio out). + * During the state transition, interrupt handler shouldn't + * be invoked before the data transfer is complete and + * hsm_task_state is changed. Hence, the following locking. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + + if (qc->tf.protocol == ATA_PROT_PIO) { + /* PIO data out protocol. + * send first data block. + */ + + /* ata_pio_sector() might change the state to HSM_ST_LAST. + * so, the state is changed here before ata_pio_sector(). + */ + ap->hsm_task_state = HSM_ST; + ata_pio_sector(qc); + ata_altstatus(ap); /* flush */ + } else + /* send CDB */ + atapi_send_cdb(ap, qc); + + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + if (qc->tf.flags & ATA_TFLAG_POLLING) + queue_work(ata_wq, &ap->pio_task); + + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + return; + +err_out: + ata_pio_error(ap); +} + /** * __atapi_pio_bytes - Transfer data from/to the ATAPI device. * @qc: Command on going @@ -3784,42 +3892,6 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc) ata_altstatus(ap); /* dummy read */ } -/** - * atapi_send_cdb - Write CDB bytes to hardware - * @ap: Port to which ATAPI device is attached. - * @qc: Taskfile currently active - * - * When device has indicated its readiness to accept - * a CDB, this function is called. Send the CDB. - * - * LOCKING: - * caller. - */ - -static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) -{ - /* send SCSI cdb */ - DPRINTK("send cdb\n"); - assert(ap->cdb_len >= 12); - - ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); - ata_altstatus(ap); /* flush */ - - switch (qc->tf.protocol) { - case ATA_PROT_ATAPI: - ap->hsm_task_state = HSM_ST; - break; - case ATA_PROT_ATAPI_NODATA: - ap->hsm_task_state = HSM_ST_LAST; - break; - case ATA_PROT_ATAPI_DMA: - ap->hsm_task_state = HSM_ST_LAST; - /* initiate bmdma */ - ap->ops->bmdma_start(qc); - break; - } -} - /** * ata_host_intr - Handle host interrupt for given (port, task) * @ap: Port on which interrupt arrived (possibly...) @@ -4041,79 +4113,6 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) return IRQ_RETVAL(handled); } -/** - * ata_dataout_task - Write first data block to hardware - * @_data: Port to which ATA/ATAPI device is attached. - * - * When device has indicated its readiness to accept - * the data, this function sends out the CDB or - * the first data block by PIO. - * After this, - * - If polling, ata_pio_task() handles the rest. - * - Otherwise, interrupt handler takes over. - * - * LOCKING: - * Kernel thread context (may sleep) - */ - -static void ata_dataout_task(void *_data) -{ - struct ata_port *ap = _data; - struct ata_queued_cmd *qc; - u8 status; - unsigned long flags; - - qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); - assert(qc->flags & ATA_QCFLAG_ACTIVE); - - /* sleep-wait for BSY to clear */ - DPRINTK("busy wait\n"); - if (ata_busy_sleep(ap, ATA_TMOUT_DATAOUT_QUICK, ATA_TMOUT_DATAOUT)) - goto err_out; - - /* make sure DRQ is set */ - status = ata_chk_status(ap); - if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) - goto err_out; - - /* Send the CDB (atapi) or the first data block (ata pio out). - * During the state transition, interrupt handler shouldn't - * be invoked before the data transfer is complete and - * hsm_task_state is changed. Hence, the following locking. - */ - spin_lock_irqsave(&ap->host_set->lock, flags); - - if (qc->tf.protocol == ATA_PROT_PIO) { - /* PIO data out protocol. - * send first data block. - */ - - /* ata_pio_sector() might change the state to HSM_ST_LAST. - * so, the state is changed here before ata_pio_sector(). - */ - ap->hsm_task_state = HSM_ST; - ata_pio_sector(qc); - ata_altstatus(ap); /* flush */ - } else - /* send CDB */ - atapi_send_cdb(ap, qc); - - /* if polling, ata_pio_task() handles the rest. - * otherwise, interrupt handler takes over from here. - */ - if (qc->tf.flags & ATA_TFLAG_POLLING) - queue_work(ata_wq, &ap->pio_task); - - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - return; - -err_out: - ata_pio_error(ap); -} - - /** * ata_port_start - Set port up for dma. * @ap: Port to initialize