From: Stephen Boyd Date: Fri, 12 Jun 2015 22:48:06 +0000 (-0700) Subject: regulator: Add docbook for soft start X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c751ad0dd640f4ce9269acd7a54de5ba8092e99e;p=linux-beck.git regulator: Add docbook for soft start The docbook for these members is missing. Add them. Warning(include/linux/regulator/machine.h:147): No description found for parameter 'soft_start' Warning(include/linux/regulator/driver.h:197): No description found for parameter 'set_soft_start' Reported-by: kbuild test robot Signed-off-by: Stephen Boyd Signed-off-by: Mark Brown --- diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index e0635d0894aa..9398d31f9531 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -111,6 +111,7 @@ struct regulator_linear_range { * to stabilise after being set to a new value, in microseconds. * The function provides the from and to voltage selector, the * function should return the worst case. + * @set_soft_start: Enable soft start for the regulator. * * @set_suspend_voltage: Set the voltage for the regulator when the system * is suspended. diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 7f7d0a3fe1e1..1258275d3751 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -87,6 +87,7 @@ struct regulator_state { * applied. * @apply_uV: Apply the voltage constraint when initialising. * @ramp_disable: Disable ramp delay when initialising or when setting voltage. + * @soft_start: Enable soft start so that voltage ramps slowly. * @pull_down: Enable pull down when regulator is disabled. * * @input_uV: Input voltage for regulator when supplied by another regulator.