From: Martin K Petersen <mkp@mkp.net>
Date: Sat, 15 Nov 2014 14:24:51 +0000 (+0000)
Subject: ixgbe: Look up MAC address in Open Firmware or IDPROM
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c762dff24c06;p=linux-beck.git

ixgbe: Look up MAC address in Open Firmware or IDPROM

Attempt to look up the MAC address in Open Firmware on systems that
support it. On SPARC resort to using the IDPROM if no OF address is
found.

Signed-off-by: Martin K Petersen <martin.petersen@oracle.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 73cd0fefad44..18ddffbb7e3f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -42,6 +42,7 @@
 #include <linux/slab.h>
 #include <net/checksum.h>
 #include <net/ip6_checksum.h>
+#include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/if.h>
 #include <linux/if_vlan.h>
@@ -50,6 +51,15 @@
 #include <linux/prefetch.h>
 #include <scsi/fc/fc_fcoe.h>
 
+#ifdef CONFIG_OF
+#include <linux/of_net.h>
+#endif
+
+#ifdef CONFIG_SPARC
+#include <asm/idprom.h>
+#include <asm/prom.h>
+#endif
+
 #include "ixgbe.h"
 #include "ixgbe_common.h"
 #include "ixgbe_dcb_82599.h"
@@ -8020,6 +8030,29 @@ int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
 	return is_wol_supported;
 }
 
+/**
+ * ixgbe_get_platform_mac_addr - Look up MAC address in Open Firmware / IDPROM
+ * @adapter: Pointer to adapter struct
+ */
+static void ixgbe_get_platform_mac_addr(struct ixgbe_adapter *adapter)
+{
+#ifdef CONFIG_OF
+	struct device_node *dp = pci_device_to_OF_node(adapter->pdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	const unsigned char *addr;
+
+	addr = of_get_mac_address(dp);
+	if (addr) {
+		ether_addr_copy(hw->mac.perm_addr, addr);
+		return;
+	}
+#endif /* CONFIG_OF */
+
+#ifdef CONFIG_SPARC
+	ether_addr_copy(hw->mac.perm_addr, idprom->id_ethaddr);
+#endif /* CONFIG_SPARC */
+}
+
 /**
  * ixgbe_probe - Device Initialization Routine
  * @pdev: PCI device information struct
@@ -8289,6 +8322,8 @@ skip_sriov:
 		goto err_sw_init;
 	}
 
+	ixgbe_get_platform_mac_addr(adapter);
+
 	memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len);
 
 	if (!is_valid_ether_addr(netdev->dev_addr)) {