From: Dan Williams <dan.j.williams@intel.com>
Date: Fri, 7 Nov 2008 00:43:55 +0000 (-0700)
Subject: [ARM] xsc3: fix xsc3_l2_inv_range
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c7cf72dcadb;p=linux-beck.git

[ARM] xsc3: fix xsc3_l2_inv_range

When 'start' and 'end' are less than a cacheline apart and 'start' is
unaligned we are done after cleaning and invalidating the first
cacheline.  So check for (start < end) which will not walk off into
invalid address ranges when (start > end).

This issue was caught by drivers/dma/dmatest.

2.6.27 is susceptible.

Cc: <stable@kernel.org>
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Lothar WaÃ<9f>mann <LW@KARO-electronics.de>
Cc: Lennert Buytenhek <buytenh@marvell.com>
Cc: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---

diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
index 10b1bae1a258..464de893a988 100644
--- a/arch/arm/mm/cache-xsc3l2.c
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -98,7 +98,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
 	/*
 	 * Clean and invalidate partial last cache line.
 	 */
-	if (end & (CACHE_LINE_SIZE - 1)) {
+	if (start < end && (end & (CACHE_LINE_SIZE - 1))) {
 		xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1));
 		xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
 		end &= ~(CACHE_LINE_SIZE - 1);
@@ -107,7 +107,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
 	/*
 	 * Invalidate all full cache lines between 'start' and 'end'.
 	 */
-	while (start != end) {
+	while (start < end) {
 		xsc3_l2_inv_pa(start);
 		start += CACHE_LINE_SIZE;
 	}