From: Paul Bolle Date: Tue, 11 Feb 2014 12:38:47 +0000 (+0100) Subject: Kconfig: Remove useless "default N" lines X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c7dcec7dd463907c451048b04f30d1870fe5cacc;p=linux-beck.git Kconfig: Remove useless "default N" lines A number of Kconfig entries default to (uppercase) "N". It was clearly intended to use "default n". But since (lowercase) "n" is the default anyway, these lines might as well be removed. Signed-off-by: Paul Bolle Signed-off-by: Jiri Kosina --- diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 9063ae6553cc..3d7f1137a21b 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -356,7 +356,6 @@ config ARC_CURR_IN_REG config ARC_MISALIGN_ACCESS bool "Emulate unaligned memory access (userspace only)" - default N select SYSCTL_ARCH_UNALIGN_NO_WARN select SYSCTL_ARCH_UNALIGN_ALLOW help diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index 6792503aaf79..15a9ed1d579c 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -11,7 +11,6 @@ config ETRAX_ETHERNET config ETRAX_NO_PHY bool "PHY not present" depends on ETRAX_ETHERNET - default N help This option disables all MDIO communication with an ethernet transceiver connected to the MII interface. This option shall @@ -116,7 +115,6 @@ config ETRAX_AXISFLASHMAP config ETRAX_AXISFLASHMAP_MTD0WHOLE bool "MTD0 is whole boot flash device" depends on ETRAX_AXISFLASHMAP - default N help When this option is not set, mtd0 refers to the first partition on the boot flash device. When set, mtd0 refers to the whole diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig index e42b331edbc6..462a5b1d8651 100644 --- a/drivers/misc/mic/Kconfig +++ b/drivers/misc/mic/Kconfig @@ -4,7 +4,6 @@ config INTEL_MIC_HOST tristate "Intel MIC Host Driver" depends on 64BIT && PCI && X86 select VHOST_RING - default N help This enables Host Driver support for the Intel Many Integrated Core (MIC) family of PCIe form factor coprocessor devices that @@ -25,7 +24,6 @@ config INTEL_MIC_CARD tristate "Intel MIC Card Driver" depends on 64BIT && X86 select VIRTIO - default N help This enables card driver support for the Intel Many Integrated Core (MIC) device family. The card driver communicates shutdown/ diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index 1e9ab6dfc90d..22cf17dcb7da 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -2,7 +2,6 @@ menu "Android" config ANDROID bool "Android Drivers" - default N ---help--- Enable support for various drivers needed on the Android platform @@ -60,7 +59,6 @@ config ANDROID_TIMED_GPIO config ANDROID_LOW_MEMORY_KILLER bool "Android Low Memory Killer" - default N ---help--- Registers processes to be killed when memory is low diff --git a/drivers/staging/bcm/Kconfig b/drivers/staging/bcm/Kconfig index 83c9752504d4..8acf4b24a7c9 100644 --- a/drivers/staging/bcm/Kconfig +++ b/drivers/staging/bcm/Kconfig @@ -1,7 +1,6 @@ config BCM_WIMAX tristate "Beceem BCS200/BCS220-3 and BCSM250 wimax support" depends on USB && NET - default N help This is an experimental driver for the Beceem WIMAX chipset used by Sprint 4G. diff --git a/drivers/staging/frontier/Kconfig b/drivers/staging/frontier/Kconfig index 7121853bd397..4da290b2f5bd 100644 --- a/drivers/staging/frontier/Kconfig +++ b/drivers/staging/frontier/Kconfig @@ -1,6 +1,5 @@ config TRANZPORT tristate "Frontier Tranzport and Alphatrack support" depends on USB - default N ---help--- Enable support for the Frontier Tranzport and Alphatrack devices. diff --git a/drivers/staging/media/go7007/Kconfig b/drivers/staging/media/go7007/Kconfig index 04bd0fba7b1f..95a3af644a92 100644 --- a/drivers/staging/media/go7007/Kconfig +++ b/drivers/staging/media/go7007/Kconfig @@ -13,7 +13,6 @@ config VIDEO_GO7007 select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT - default N ---help--- This is a video4linux driver for the WIS GO7007 MPEG encoder chip. @@ -24,7 +23,6 @@ config VIDEO_GO7007 config VIDEO_GO7007_USB tristate "WIS GO7007 USB support" depends on VIDEO_GO7007 && USB - default N ---help--- This is a video4linux driver for the WIS GO7007 MPEG encoder chip over USB. @@ -46,7 +44,6 @@ config VIDEO_GO7007_LOADER config VIDEO_GO7007_USB_S2250_BOARD tristate "Sensoray 2250/2251 support" depends on VIDEO_GO7007_USB && USB - default N ---help--- This is a video4linux driver for the Sensoray 2250/2251 device. diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig index 3162aabbeb07..ff8d41ebca36 100644 --- a/drivers/staging/rtl8187se/Kconfig +++ b/drivers/staging/rtl8187se/Kconfig @@ -6,6 +6,5 @@ config R8187SE select WEXT_PRIV select EEPROM_93CX6 select CRYPTO - default N ---help--- If built as a module, it will be called r8187se.ko. diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig index c9c548f17494..70fecfabc0c7 100644 --- a/drivers/staging/rtl8188eu/Kconfig +++ b/drivers/staging/rtl8188eu/Kconfig @@ -3,7 +3,6 @@ config R8188EU depends on WLAN && USB select WIRELESS_EXT select WEXT_PRIV - default N ---help--- This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N. If built as a module, it will be called r8188eu. diff --git a/drivers/staging/rtl8192e/rtl8192e/Kconfig b/drivers/staging/rtl8192e/rtl8192e/Kconfig index 50e0d91a409a..ad82bc348a75 100644 --- a/drivers/staging/rtl8192e/rtl8192e/Kconfig +++ b/drivers/staging/rtl8192e/rtl8192e/Kconfig @@ -5,5 +5,4 @@ config RTL8192E select WIRELESS_EXT select WEXT_PRIV select CRYPTO - default N ---help--- diff --git a/drivers/staging/rtl8192u/Kconfig b/drivers/staging/rtl8192u/Kconfig index 3f055091b35f..3ee9d0d00fb6 100644 --- a/drivers/staging/rtl8192u/Kconfig +++ b/drivers/staging/rtl8192u/Kconfig @@ -5,5 +5,4 @@ config RTL8192U select WIRELESS_EXT select WEXT_PRIV select CRYPTO - default N ---help--- diff --git a/drivers/staging/rtl8712/Kconfig b/drivers/staging/rtl8712/Kconfig index 6a43312380e0..f160eee52f09 100644 --- a/drivers/staging/rtl8712/Kconfig +++ b/drivers/staging/rtl8712/Kconfig @@ -4,7 +4,6 @@ config R8712U select WIRELESS_EXT select WEXT_PRIV select FW_LOADER - default N ---help--- This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130. If built as a module, it will be called r8712u. @@ -12,7 +11,6 @@ config R8712U config R8712_TX_AGGR bool "Realtek RTL8712U Transmit Aggregation code" depends on R8712U && BROKEN - default N ---help--- This option provides transmit aggregation for the Realtek RTL8712 USB device. diff --git a/drivers/staging/usbip/Kconfig b/drivers/staging/usbip/Kconfig index 886000980474..bd99e9e47e50 100644 --- a/drivers/staging/usbip/Kconfig +++ b/drivers/staging/usbip/Kconfig @@ -1,7 +1,6 @@ config USBIP_CORE tristate "USB/IP support" depends on USB && NET - default N ---help--- This enables pushing USB packets over IP to allow remote machines direct access to USB devices. It provides the @@ -18,7 +17,6 @@ config USBIP_CORE config USBIP_VHCI_HCD tristate "VHCI hcd" depends on USBIP_CORE - default N ---help--- This enables the USB/IP virtual host controller driver, which is run on the remote machine. @@ -29,7 +27,6 @@ config USBIP_VHCI_HCD config USBIP_HOST tristate "Host driver" depends on USBIP_CORE - default N ---help--- This enables the USB/IP host driver, which is run on the machine that is sharing the USB devices. @@ -40,6 +37,5 @@ config USBIP_HOST config USBIP_DEBUG bool "Debug messages for USB/IP" depends on USBIP_CORE - default N ---help--- This enables the debug messages from the USB/IP drivers. diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index fed7f68d025d..cb8e99156f5a 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -10,7 +10,6 @@ config USB_DEBUG config USB_ANNOUNCE_NEW_DEVICES bool "USB announce new devices" - default N help Say Y here if you want the USB core to always announce the idVendor, idProduct, Manufacturer, Product, and SerialNumber diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a9707da7da0b..c8b4161613cf 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -314,7 +314,6 @@ config USB_ISP1760_HCD config USB_ISP1362_HCD tristate "ISP1362 HCD support" - default N ---help--- Supports the Philips ISP1362 chip as a host controller @@ -326,7 +325,6 @@ config USB_ISP1362_HCD config USB_FUSBH200_HCD tristate "FUSBH200 HCD support" depends on USB - default N ---help--- Faraday FUSBH200 is designed to meet USB2.0 EHCI specification with minor modification. @@ -337,7 +335,6 @@ config USB_FUSBH200_HCD config USB_FOTG210_HCD tristate "FOTG210 HCD support" depends on USB - default N ---help--- Faraday FOTG210 is an OTG controller which can be configured as an USB2.0 host. It is designed to meet USB2.0 EHCI specification