From: Michal Kazior Date: Fri, 22 Aug 2014 12:23:30 +0000 (+0200) Subject: ath10k: fix legacy irq workaround X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c947a9e1c7b81f7d6a94f3bc3f16475d982e77ea;p=linux-beck.git ath10k: fix legacy irq workaround Wrong register was being set up. This could prevent firmware from booting in some rare cases when using legacy interrupts. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index bb1e4738add4..4a7a5fe60c65 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -2465,9 +2465,10 @@ static int ath10k_pci_wait_for_target_init(struct ath10k *ar) if (ar_pci->num_msi_intrs == 0) /* Fix potential race by repeating CORE_BASE writes */ - ath10k_pci_soc_write32(ar, PCIE_INTR_ENABLE_ADDRESS, - PCIE_INTR_FIRMWARE_MASK | - PCIE_INTR_CE_MASK_ALL); + ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + + PCIE_INTR_ENABLE_ADDRESS, + PCIE_INTR_FIRMWARE_MASK | + PCIE_INTR_CE_MASK_ALL); mdelay(10); } while (time_before(jiffies, timeout));