From: Jesse Barnes Date: Fri, 10 Sep 2010 17:57:18 +0000 (-0700) Subject: drm/i915: enable PCH PLL, FDI training and transcoder even for eDP X-Git-Tag: v2.6.37-rc1~92^2~28^2~153 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=c98e9dcf9023e72837c1c01251f370e2358a0de6;p=karo-tx-linux.git drm/i915: enable PCH PLL, FDI training and transcoder even for eDP eDP panels require these to be set up prior to panel power sequencing, or they'll fail to power on due to an "asset not ready" check. And of course, eDP panels attached to anything other than DP_A need them enabled regardless, since they'll be driven from the CPU through FDI out to the PCH. Signed-off-by: Jesse Barnes Signed-off-by: Chris Wilson --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 98276b8454fc..ff549199c700 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1889,34 +1889,32 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) } } - if (!HAS_eDP) { - /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ - temp = I915_READ(fdi_rx_reg); - /* - * make the BPC in FDI Rx be consistent with that in - * pipeconf reg. - */ - temp &= ~(0x7 << 16); - temp |= (pipe_bpc << 11); - temp &= ~(7 << 19); - temp |= (intel_crtc->fdi_lanes - 1) << 19; - I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE); - I915_READ(fdi_rx_reg); - udelay(200); + /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ + temp = I915_READ(fdi_rx_reg); + /* + * make the BPC in FDI Rx be consistent with that in + * pipeconf reg. + */ + temp &= ~(0x7 << 16); + temp |= (pipe_bpc << 11); + temp &= ~(7 << 19); + temp |= (intel_crtc->fdi_lanes - 1) << 19; + I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE); + I915_READ(fdi_rx_reg); + udelay(200); - /* Switch from Rawclk to PCDclk */ - temp = I915_READ(fdi_rx_reg); - I915_WRITE(fdi_rx_reg, temp | FDI_SEL_PCDCLK); - I915_READ(fdi_rx_reg); - udelay(200); + /* Switch from Rawclk to PCDclk */ + temp = I915_READ(fdi_rx_reg); + I915_WRITE(fdi_rx_reg, temp | FDI_SEL_PCDCLK); + I915_READ(fdi_rx_reg); + udelay(200); - /* Enable CPU FDI TX PLL, always on for Ironlake */ - temp = I915_READ(fdi_tx_reg); - if ((temp & FDI_TX_PLL_ENABLE) == 0) { - I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE); - I915_READ(fdi_tx_reg); - udelay(100); - } + /* Enable CPU FDI TX PLL, always on for Ironlake */ + temp = I915_READ(fdi_tx_reg); + if ((temp & FDI_TX_PLL_ENABLE) == 0) { + I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE); + I915_READ(fdi_tx_reg); + udelay(100); } /* Enable panel fitting for LVDS */ @@ -1951,115 +1949,113 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); } - if (!HAS_eDP) { - /* For PCH output, training FDI link */ - if (IS_GEN6(dev)) - gen6_fdi_link_train(crtc); - else - ironlake_fdi_link_train(crtc); + /* For PCH output, training FDI link */ + if (IS_GEN6(dev)) + gen6_fdi_link_train(crtc); + else + ironlake_fdi_link_train(crtc); - /* enable PCH DPLL */ - temp = I915_READ(pch_dpll_reg); - if ((temp & DPLL_VCO_ENABLE) == 0) { - I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE); - I915_READ(pch_dpll_reg); - } - udelay(200); + /* enable PCH DPLL */ + temp = I915_READ(pch_dpll_reg); + if ((temp & DPLL_VCO_ENABLE) == 0) { + I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE); + I915_READ(pch_dpll_reg); + } + udelay(200); - if (HAS_PCH_CPT(dev)) { - /* Be sure PCH DPLL SEL is set */ - temp = I915_READ(PCH_DPLL_SEL); - if (trans_dpll_sel == 0 && - (temp & TRANSA_DPLL_ENABLE) == 0) - temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL); - else if (trans_dpll_sel == 1 && - (temp & TRANSB_DPLL_ENABLE) == 0) - temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); - I915_WRITE(PCH_DPLL_SEL, temp); - I915_READ(PCH_DPLL_SEL); - } - /* set transcoder timing */ - I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg)); - I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg)); - I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg)); + if (HAS_PCH_CPT(dev)) { + /* Be sure PCH DPLL SEL is set */ + temp = I915_READ(PCH_DPLL_SEL); + if (trans_dpll_sel == 0 && + (temp & TRANSA_DPLL_ENABLE) == 0) + temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL); + else if (trans_dpll_sel == 1 && + (temp & TRANSB_DPLL_ENABLE) == 0) + temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); + I915_WRITE(PCH_DPLL_SEL, temp); + I915_READ(PCH_DPLL_SEL); + } + /* set transcoder timing */ + I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg)); + I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg)); + I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg)); - I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg)); - I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg)); - I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg)); + I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg)); + I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg)); + I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg)); - /* enable normal train */ - temp = I915_READ(fdi_tx_reg); - temp &= ~FDI_LINK_TRAIN_NONE; - I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE | - FDI_TX_ENHANCE_FRAME_ENABLE); - I915_READ(fdi_tx_reg); + /* enable normal train */ + temp = I915_READ(fdi_tx_reg); + temp &= ~FDI_LINK_TRAIN_NONE; + I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE | + FDI_TX_ENHANCE_FRAME_ENABLE); + I915_READ(fdi_tx_reg); - temp = I915_READ(fdi_rx_reg); - if (HAS_PCH_CPT(dev)) { - temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; - temp |= FDI_LINK_TRAIN_NORMAL_CPT; - } else { - temp &= ~FDI_LINK_TRAIN_NONE; - temp |= FDI_LINK_TRAIN_NONE; - } - I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE); - I915_READ(fdi_rx_reg); + temp = I915_READ(fdi_rx_reg); + if (HAS_PCH_CPT(dev)) { + temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; + temp |= FDI_LINK_TRAIN_NORMAL_CPT; + } else { + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_NONE; + } + I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE); + I915_READ(fdi_rx_reg); - /* wait one idle pattern time */ - udelay(100); + /* wait one idle pattern time */ + udelay(100); - /* For PCH DP, enable TRANS_DP_CTL */ - if (HAS_PCH_CPT(dev) && - intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { - int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B; - int reg; - - reg = I915_READ(trans_dp_ctl); - reg &= ~(TRANS_DP_PORT_SEL_MASK | - TRANS_DP_SYNC_MASK); - reg |= (TRANS_DP_OUTPUT_ENABLE | - TRANS_DP_ENH_FRAMING); - - if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) - reg |= TRANS_DP_HSYNC_ACTIVE_HIGH; - if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC) - reg |= TRANS_DP_VSYNC_ACTIVE_HIGH; - - switch (intel_trans_dp_port_sel(crtc)) { - case PCH_DP_B: - reg |= TRANS_DP_PORT_SEL_B; - break; - case PCH_DP_C: - reg |= TRANS_DP_PORT_SEL_C; - break; - case PCH_DP_D: - reg |= TRANS_DP_PORT_SEL_D; - break; - default: - DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n"); - reg |= TRANS_DP_PORT_SEL_B; - break; - } + /* For PCH DP, enable TRANS_DP_CTL */ + if (HAS_PCH_CPT(dev) && + intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { + int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B; + int reg; - I915_WRITE(trans_dp_ctl, reg); - POSTING_READ(trans_dp_ctl); + reg = I915_READ(trans_dp_ctl); + reg &= ~(TRANS_DP_PORT_SEL_MASK | + TRANS_DP_SYNC_MASK); + reg |= (TRANS_DP_OUTPUT_ENABLE | + TRANS_DP_ENH_FRAMING); + + if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) + reg |= TRANS_DP_HSYNC_ACTIVE_HIGH; + if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC) + reg |= TRANS_DP_VSYNC_ACTIVE_HIGH; + + switch (intel_trans_dp_port_sel(crtc)) { + case PCH_DP_B: + reg |= TRANS_DP_PORT_SEL_B; + break; + case PCH_DP_C: + reg |= TRANS_DP_PORT_SEL_C; + break; + case PCH_DP_D: + reg |= TRANS_DP_PORT_SEL_D; + break; + default: + DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n"); + reg |= TRANS_DP_PORT_SEL_B; + break; } - /* enable PCH transcoder */ - temp = I915_READ(transconf_reg); - /* - * make the BPC in transcoder be consistent with - * that in pipeconf reg. - */ - temp &= ~PIPE_BPC_MASK; - temp |= pipe_bpc; - I915_WRITE(transconf_reg, temp | TRANS_ENABLE); - I915_READ(transconf_reg); - - if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 100)) - DRM_ERROR("failed to enable transcoder\n"); + I915_WRITE(trans_dp_ctl, reg); + POSTING_READ(trans_dp_ctl); } + /* enable PCH transcoder */ + temp = I915_READ(transconf_reg); + /* + * make the BPC in transcoder be consistent with + * that in pipeconf reg. + */ + temp &= ~PIPE_BPC_MASK; + temp |= pipe_bpc; + I915_WRITE(transconf_reg, temp | TRANS_ENABLE); + I915_READ(transconf_reg); + + if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 100)) + DRM_ERROR("failed to enable transcoder\n"); + intel_crtc_load_lut(crtc); intel_update_fbc(crtc, &crtc->mode);