From: Ron Mercer Date: Mon, 2 Mar 2009 08:07:30 +0000 (+0000) Subject: qlge: Add support for firmware mailbox commands. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ca0413b66ab44ee0ea40d04eab44ff0fdaf32a1d;p=linux-beck.git qlge: Add support for firmware mailbox commands. This interface will be used for setting things like maximum frame size, setting WOL, and ACKing changes requested by the FCOE function. Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c index a4b810d0d3d1..11102bec36b2 100644 --- a/drivers/net/qlge/qlge_mpi.c +++ b/drivers/net/qlge/qlge_mpi.c @@ -1,5 +1,25 @@ #include "qlge.h" +static void ql_display_mb_sts(struct ql_adapter *qdev, + struct mbox_params *mbcp) +{ + int i; + static char *err_sts[] = { + "Command Complete", + "Command Not Supported", + "Host Interface Error", + "Checksum Error", + "Unused Completion Status", + "Test Failed", + "Command Parameter Error"}; + + QPRINTK(qdev, DRV, DEBUG, "%s.\n", + err_sts[mbcp->mbox_out[0] & 0x0000000f]); + for (i = 0; i < mbcp->out_count; i++) + QPRINTK(qdev, DRV, DEBUG, "mbox_out[%d] = 0x%.08x.\n", + i, mbcp->mbox_out[i]); +} + int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data) { int status; @@ -65,6 +85,59 @@ static int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp) return status; } +/* Wait for a single mailbox command to complete. + * Returns zero on success. + */ +static int ql_wait_mbx_cmd_cmplt(struct ql_adapter *qdev) +{ + int count = 50; /* TODO: arbitrary for now. */ + u32 value; + + do { + value = ql_read32(qdev, STS); + if (value & STS_PI) + return 0; + udelay(UDELAY_DELAY); /* 10us */ + } while (--count); + return -ETIMEDOUT; +} + +/* Execute a single mailbox command. + * Caller must hold PROC_ADDR semaphore. + */ +static int ql_exec_mb_cmd(struct ql_adapter *qdev, struct mbox_params *mbcp) +{ + int i, status; + + /* + * Make sure there's nothing pending. + * This shouldn't happen. + */ + if (ql_read32(qdev, CSR) & CSR_HRI) + return -EIO; + + status = ql_sem_spinlock(qdev, SEM_PROC_REG_MASK); + if (status) + return status; + + /* + * Fill the outbound mailboxes. + */ + for (i = 0; i < mbcp->in_count; i++) { + status = ql_write_mpi_reg(qdev, qdev->mailbox_in + i, + mbcp->mbox_in[i]); + if (status) + goto end; + } + /* + * Wake up the MPI firmware. + */ + ql_write32(qdev, CSR, CSR_CMD_SET_H2R_INT); +end: + ql_sem_unlock(qdev, SEM_PROC_REG_MASK); + return status; +} + static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp) { mbcp->out_count = 2; @@ -133,6 +206,7 @@ exit: static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp) { int status; + int orig_count = mbcp->out_count; /* Just get mailbox zero for now. */ mbcp->out_count = 1; @@ -146,6 +220,27 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp) switch (mbcp->mbox_out[0]) { + /* This case is only active when we arrive here + * as a result of issuing a mailbox command to + * the firmware. + */ + case MB_CMD_STS_INTRMDT: + case MB_CMD_STS_GOOD: + case MB_CMD_STS_INVLD_CMD: + case MB_CMD_STS_XFC_ERR: + case MB_CMD_STS_CSUM_ERR: + case MB_CMD_STS_ERR: + case MB_CMD_STS_PARAM_ERR: + /* We can only get mailbox status if we're polling from an + * unfinished command. Get the rest of the status data and + * return back to the caller. + * We only end up here when we're polling for a mailbox + * command completion. + */ + mbcp->out_count = orig_count; + status = ql_get_mb_sts(qdev, mbcp); + return status; + case AEN_LINK_UP: ql_link_up(qdev, mbcp); break; @@ -158,12 +253,8 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp) ql_init_fw_done(qdev, mbcp); break; - case MB_CMD_STS_GOOD: - break; - case AEN_FW_INIT_FAIL: case AEN_SYS_ERR: - case MB_CMD_STS_ERR: ql_queue_fw_error(qdev); break; @@ -177,6 +268,129 @@ end: return status; } +/* Execute a single mailbox command. + * mbcp is a pointer to an array of u32. Each + * element in the array contains the value for it's + * respective mailbox register. + */ +static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) +{ + int status, count; + + mutex_lock(&qdev->mpi_mutex); + + /* Begin polled mode for MPI */ + ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); + + /* Load the mailbox registers and wake up MPI RISC. */ + status = ql_exec_mb_cmd(qdev, mbcp); + if (status) + goto end; + + + /* If we're generating a system error, then there's nothing + * to wait for. + */ + if (mbcp->mbox_in[0] == MB_CMD_MAKE_SYS_ERR) + goto end; + + /* Wait for the command to complete. We loop + * here because some AEN might arrive while + * we're waiting for the mailbox command to + * complete. If more than 5 arrive then we can + * assume something is wrong. */ + count = 5; + do { + /* Wait for the interrupt to come in. */ + status = ql_wait_mbx_cmd_cmplt(qdev); + if (status) + goto end; + + /* Process the event. If it's an AEN, it + * will be handled in-line or a worker + * will be spawned. If it's our completion + * we will catch it below. + */ + status = ql_mpi_handler(qdev, mbcp); + if (status) + goto end; + + /* It's either the completion for our mailbox + * command complete or an AEN. If it's our + * completion then get out. + */ + if (((mbcp->mbox_out[0] & 0x0000f000) == + MB_CMD_STS_GOOD) || + ((mbcp->mbox_out[0] & 0x0000f000) == + MB_CMD_STS_INTRMDT)) + break; + } while (--count); + + if (!count) { + QPRINTK(qdev, DRV, ERR, + "Timed out waiting for mailbox complete.\n"); + status = -ETIMEDOUT; + goto end; + } + + /* Now we can clear the interrupt condition + * and look at our status. + */ + ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT); + + if (((mbcp->mbox_out[0] & 0x0000f000) != + MB_CMD_STS_GOOD) && + ((mbcp->mbox_out[0] & 0x0000f000) != + MB_CMD_STS_INTRMDT)) { + ql_display_mb_sts(qdev, mbcp); + status = -EIO; + } +end: + mutex_unlock(&qdev->mpi_mutex); + /* End polled mode for MPI */ + ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI); + return status; +} + +/* Get functional state for MPI firmware. + * Returns zero on success. + */ +int ql_mb_get_fw_state(struct ql_adapter *qdev) +{ + struct mbox_params mbc; + struct mbox_params *mbcp = &mbc; + int status = 0; + + memset(mbcp, 0, sizeof(struct mbox_params)); + + mbcp->in_count = 1; + mbcp->out_count = 2; + + mbcp->mbox_in[0] = MB_CMD_GET_FW_STATE; + + status = ql_mailbox_command(qdev, mbcp); + if (status) + return status; + + if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { + QPRINTK(qdev, DRV, ERR, + "Failed Get Firmware State.\n"); + status = -EIO; + } + + /* If bit zero is set in mbx 1 then the firmware is + * running, but not initialized. This should never + * happen. + */ + if (mbcp->mbox_out[1] & 1) { + QPRINTK(qdev, DRV, ERR, + "Firmware waiting for initialization.\n"); + status = -EIO; + } + + return status; +} + void ql_mpi_work(struct work_struct *work) { struct ql_adapter *qdev =