From: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu, 14 Feb 2013 15:54:22 +0000 (+0100)
Subject: drm/i915: split up fdi_set_m_n into computation and hw setup
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ca3a0ff80faa7ee043fd615c9d9394757e2acb09;p=linux-beck.git

drm/i915: split up fdi_set_m_n into computation and hw setup

And also move the computed m_n values into the pipe_config. This is a
prep step to move the fdi state computation completely into the
prepare phase of the modeset sequence. Which will allow us to handle
fdi link bw constraints in a better way.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 63975c7f9668..0f1e17a7b757 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5499,13 +5499,11 @@ void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
 	}
 }
 
-static void ironlake_fdi_set_m_n(struct drm_crtc *crtc)
+static void ironlake_fdi_compute_config(struct intel_crtc *intel_crtc)
 {
-	struct drm_device *dev = crtc->dev;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_device *dev = intel_crtc->base.dev;
 	struct drm_display_mode *adjusted_mode =
 		&intel_crtc->config.adjusted_mode;
-	struct intel_link_m_n m_n = {0};
 	int target_clock, lane, link_bw;
 
 	/* FDI is a binary signal running at ~2.7GHz, encoding
@@ -5530,9 +5528,7 @@ static void ironlake_fdi_set_m_n(struct drm_crtc *crtc)
 	if (intel_crtc->config.pixel_multiplier > 1)
 		link_bw *= intel_crtc->config.pixel_multiplier;
 	intel_link_compute_m_n(intel_crtc->config.pipe_bpp, lane, target_clock,
-			       link_bw, &m_n);
-
-	intel_cpu_transcoder_set_m_n(intel_crtc, &m_n);
+			       link_bw, &intel_crtc->config.fdi_m_n);
 }
 
 static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
@@ -5753,8 +5749,12 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	/* Note, this also computes intel_crtc->fdi_lanes which is used below in
 	 * ironlake_check_fdi_lanes. */
 	intel_crtc->config.fdi_lanes = 0;
-	if (intel_crtc->config.has_pch_encoder)
-		ironlake_fdi_set_m_n(crtc);
+	if (intel_crtc->config.has_pch_encoder) {
+		ironlake_fdi_compute_config(intel_crtc);
+
+		intel_cpu_transcoder_set_m_n(intel_crtc,
+					     &intel_crtc->config.fdi_m_n);
+	}
 
 	fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
 
@@ -5884,8 +5884,12 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 
 	intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
 
-	if (intel_crtc->config.has_pch_encoder)
-		ironlake_fdi_set_m_n(crtc);
+	if (intel_crtc->config.has_pch_encoder) {
+		ironlake_fdi_compute_config(intel_crtc);
+
+		intel_cpu_transcoder_set_m_n(intel_crtc,
+					     &intel_crtc->config.fdi_m_n);
+	}
 
 	haswell_set_pipeconf(crtc);
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index cc075a312ea3..48f309eaf7aa 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -250,8 +250,9 @@ struct intel_crtc_config {
 		u32 size;
 	} pch_pfit;
 
-	/* FDI lanes used, only valid if has_pch_encoder is set. */
+	/* FDI configuration, only valid if has_pch_encoder is set. */
 	int fdi_lanes;
+	struct intel_link_m_n fdi_m_n;
 };
 
 struct intel_crtc {