From: Haavard Skinnemoen Date: Sun, 5 Oct 2008 13:16:59 +0000 (+0200) Subject: atmel-mci: Don't overwrite error bits when NOTBUSY is set X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ca55f46e13dd07b029b0a3d64637f983a6627b23;p=mv-sheeva.git atmel-mci: Don't overwrite error bits when NOTBUSY is set After a data error, we wait for the NOTBUSY bit to be set so that we can be sure the data transfer is completely finished. However, when NOTBUSY is set, the interrupt handler copies the contents of SR into data_status, overwriting any error bits we may have detected earlier. To avoid this, initialize data_status to 0 before starting a request, and don't overwrite it unless it still contains 0. Signed-off-by: Haavard Skinnemoen --- diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index d45dfa25938..02529af7c74 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -694,6 +694,7 @@ static void atmci_start_request(struct atmel_mci *host, host->pending_events = 0; host->completed_events = 0; + host->data_status = 0; if (host->need_reset) { mci_writel(host, CR, MCI_CR_SWRST); @@ -1408,7 +1409,8 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) if (pending & MCI_NOTBUSY) { mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY); - host->data_status = status; + if (!host->data_status) + host->data_status = status; smp_wmb(); atmci_set_pending(host, EVENT_DATA_COMPLETE); tasklet_schedule(&host->tasklet);