From: Loic Poulain Date: Wed, 1 Jul 2015 10:20:26 +0000 (+0200) Subject: Bluetooth: hci_uart: Add basic support for Intel Lightning Peak devices X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ca93cee5a56e5199622bea8bff24c0a96e70c8f1;p=linux-beck.git Bluetooth: hci_uart: Add basic support for Intel Lightning Peak devices The Intel Lightning Peak devices do not come with Bluetooth firmware loaded and thus require a full download of the operational Bluetooth firmware when the device is attached via the Bluetooth line discipline. Lightning Peak devices start with a bootloader mode that only accepts a very limited set of HCI commands. The supported commands are enough to identify the hardware and select the right firmware to load. Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann --- diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 2e777071e1dc..79e8234b1aa5 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -132,6 +132,7 @@ config BT_HCIUART_3WIRE config BT_HCIUART_INTEL bool "Intel protocol support" depends on BT_HCIUART + select BT_HCIUART_H4 select BT_INTEL help The Intel protocol support enables Bluetooth HCI over serial diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c index 5dd07bf05236..ade19aaeb5c5 100644 --- a/drivers/bluetooth/hci_intel.c +++ b/drivers/bluetooth/hci_intel.c @@ -24,8 +24,612 @@ #include #include #include +#include +#include #include #include #include "hci_uart.h" +#include "btintel.h" + +#define STATE_BOOTLOADER 0 +#define STATE_DOWNLOADING 1 +#define STATE_FIRMWARE_LOADED 2 +#define STATE_FIRMWARE_FAILED 3 +#define STATE_BOOTING 4 + +struct intel_data { + struct sk_buff *rx_skb; + struct sk_buff_head txq; + unsigned long flags; +}; + +static int intel_open(struct hci_uart *hu) +{ + struct intel_data *intel; + + BT_DBG("hu %p", hu); + + intel = kzalloc(sizeof(*intel), GFP_KERNEL); + if (!intel) + return -ENOMEM; + + skb_queue_head_init(&intel->txq); + + hu->priv = intel; + return 0; +} + +static int intel_close(struct hci_uart *hu) +{ + struct intel_data *intel = hu->priv; + + BT_DBG("hu %p", hu); + + skb_queue_purge(&intel->txq); + kfree_skb(intel->rx_skb); + kfree(intel); + + hu->priv = NULL; + return 0; +} + +static int intel_flush(struct hci_uart *hu) +{ + struct intel_data *intel = hu->priv; + + BT_DBG("hu %p", hu); + + skb_queue_purge(&intel->txq); + + return 0; +} + +static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode) +{ + struct sk_buff *skb; + struct hci_event_hdr *hdr; + struct hci_ev_cmd_complete *evt; + + skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC); + if (!skb) + return -ENOMEM; + + hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr)); + hdr->evt = HCI_EV_CMD_COMPLETE; + hdr->plen = sizeof(*evt) + 1; + + evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt)); + evt->ncmd = 0x01; + evt->opcode = cpu_to_le16(opcode); + + *skb_put(skb, 1) = 0x00; + + bt_cb(skb)->pkt_type = HCI_EVENT_PKT; + + return hci_recv_frame(hdev, skb); +} + +static int intel_secure_send(struct hci_dev *hdev, u8 fragment_type, + u32 plen, const void *param) +{ + while (plen > 0) { + struct sk_buff *skb; + u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen; + + cmd_param[0] = fragment_type; + memcpy(cmd_param + 1, param, fragment_len); + + skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1, + cmd_param, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + kfree_skb(skb); + + plen -= fragment_len; + param += fragment_len; + } + + return 0; +} + +static void intel_version_info(struct hci_dev *hdev, + struct intel_version *ver) +{ + const char *variant; + + switch (ver->fw_variant) { + case 0x06: + variant = "Bootloader"; + break; + case 0x23: + variant = "Firmware"; + break; + default: + return; + } + + BT_INFO("%s: %s revision %u.%u build %u week %u %u", hdev->name, + variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f, + ver->fw_build_num, ver->fw_build_ww, 2000 + ver->fw_build_yy); +} + +static int intel_setup(struct hci_uart *hu) +{ + static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01, + 0x00, 0x08, 0x04, 0x00 }; + struct intel_data *intel = hu->priv; + struct hci_dev *hdev = hu->hdev; + struct sk_buff *skb; + struct intel_version *ver; + struct intel_boot_params *params; + const struct firmware *fw; + const u8 *fw_ptr; + char fwname[64]; + u32 frag_len; + ktime_t calltime, delta, rettime; + unsigned long long duration; + int err; + + BT_DBG("%s", hdev->name); + + calltime = ktime_get(); + + set_bit(STATE_BOOTLOADER, &intel->flags); + + /* Read the Intel version information to determine if the device + * is in bootloader mode or if it already has operational firmware + * loaded. + */ + skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: Reading Intel version information failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len != sizeof(*ver)) { + BT_ERR("%s: Intel version event size mismatch", hdev->name); + kfree_skb(skb); + return -EILSEQ; + } + + ver = (struct intel_version *)skb->data; + if (ver->status) { + BT_ERR("%s: Intel version command failure (%02x)", + hdev->name, ver->status); + err = -bt_to_errno(ver->status); + kfree_skb(skb); + return err; + } + + /* The hardware platform number has a fixed value of 0x37 and + * for now only accept this single value. + */ + if (ver->hw_platform != 0x37) { + BT_ERR("%s: Unsupported Intel hardware platform (%u)", + hdev->name, ver->hw_platform); + kfree_skb(skb); + return -EINVAL; + } + + /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is + * supported by this firmware loading method. This check has been + * put in place to ensure correct forward compatibility options + * when newer hardware variants come along. + */ + if (ver->hw_variant != 0x0b) { + BT_ERR("%s: Unsupported Intel hardware variant (%u)", + hdev->name, ver->hw_variant); + kfree_skb(skb); + return -EINVAL; + } + + intel_version_info(hdev, ver); + + /* The firmware variant determines if the device is in bootloader + * mode or is running operational firmware. The value 0x06 identifies + * the bootloader and the value 0x23 identifies the operational + * firmware. + * + * When the operational firmware is already present, then only + * the check for valid Bluetooth device address is needed. This + * determines if the device will be added as configured or + * unconfigured controller. + * + * It is not possible to use the Secure Boot Parameters in this + * case since that command is only available in bootloader mode. + */ + if (ver->fw_variant == 0x23) { + kfree_skb(skb); + clear_bit(STATE_BOOTLOADER, &intel->flags); + btintel_check_bdaddr(hdev); + return 0; + } + + /* If the device is not in bootloader mode, then the only possible + * choice is to return an error and abort the device initialization. + */ + if (ver->fw_variant != 0x06) { + BT_ERR("%s: Unsupported Intel firmware variant (%u)", + hdev->name, ver->fw_variant); + kfree_skb(skb); + return -ENODEV; + } + + kfree_skb(skb); + + /* Read the secure boot parameters to identify the operating + * details of the bootloader. + */ + skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: Reading Intel boot parameters failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len != sizeof(*params)) { + BT_ERR("%s: Intel boot parameters size mismatch", hdev->name); + kfree_skb(skb); + return -EILSEQ; + } + + params = (struct intel_boot_params *)skb->data; + if (params->status) { + BT_ERR("%s: Intel boot parameters command failure (%02x)", + hdev->name, params->status); + err = -bt_to_errno(params->status); + kfree_skb(skb); + return err; + } + + BT_INFO("%s: Device revision is %u", hdev->name, + le16_to_cpu(params->dev_revid)); + + BT_INFO("%s: Secure boot is %s", hdev->name, + params->secure_boot ? "enabled" : "disabled"); + + BT_INFO("%s: Minimum firmware build %u week %u %u", hdev->name, + params->min_fw_build_nn, params->min_fw_build_cw, + 2000 + params->min_fw_build_yy); + + /* It is required that every single firmware fragment is acknowledged + * with a command complete event. If the boot parameters indicate + * that this bootloader does not send them, then abort the setup. + */ + if (params->limited_cce != 0x00) { + BT_ERR("%s: Unsupported Intel firmware loading method (%u)", + hdev->name, params->limited_cce); + kfree_skb(skb); + return -EINVAL; + } + + /* If the OTP has no valid Bluetooth device address, then there will + * also be no valid address for the operational firmware. + */ + if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) { + BT_INFO("%s: No device address configured", hdev->name); + set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); + } + + /* With this Intel bootloader only the hardware variant and device + * revision information are used to select the right firmware. + * + * Currently this bootloader support is limited to hardware variant + * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b). + */ + snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.sfi", + le16_to_cpu(params->dev_revid)); + + err = request_firmware(&fw, fwname, &hdev->dev); + if (err < 0) { + BT_ERR("%s: Failed to load Intel firmware file (%d)", + hdev->name, err); + kfree_skb(skb); + return err; + } + + BT_INFO("%s: Found device firmware: %s", hdev->name, fwname); + + kfree_skb(skb); + + if (fw->size < 644) { + BT_ERR("%s: Invalid size of firmware file (%zu)", + hdev->name, fw->size); + err = -EBADF; + goto done; + } + + set_bit(STATE_DOWNLOADING, &intel->flags); + + /* Start the firmware download transaction with the Init fragment + * represented by the 128 bytes of CSS header. + */ + err = intel_secure_send(hdev, 0x00, 128, fw->data); + if (err < 0) { + BT_ERR("%s: Failed to send firmware header (%d)", + hdev->name, err); + goto done; + } + + /* Send the 256 bytes of public key information from the firmware + * as the PKey fragment. + */ + err = intel_secure_send(hdev, 0x03, 256, fw->data + 128); + if (err < 0) { + BT_ERR("%s: Failed to send firmware public key (%d)", + hdev->name, err); + goto done; + } + + /* Send the 256 bytes of signature information from the firmware + * as the Sign fragment. + */ + err = intel_secure_send(hdev, 0x02, 256, fw->data + 388); + if (err < 0) { + BT_ERR("%s: Failed to send firmware signature (%d)", + hdev->name, err); + goto done; + } + + fw_ptr = fw->data + 644; + frag_len = 0; + + while (fw_ptr - fw->data < fw->size) { + struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len); + + frag_len += sizeof(*cmd) + cmd->plen; + + BT_DBG("%s: patching %td/%zu", hdev->name, + (fw_ptr - fw->data), fw->size); + + /* The parameter length of the secure send command requires + * a 4 byte alignment. It happens so that the firmware file + * contains proper Intel_NOP commands to align the fragments + * as needed. + * + * Send set of commands with 4 byte alignment from the + * firmware data buffer as a single Data fragement. + */ + if (frag_len % 4) + continue; + + /* Send each command from the firmware data buffer as + * a single Data fragment. + */ + err = intel_secure_send(hdev, 0x01, frag_len, fw_ptr); + if (err < 0) { + BT_ERR("%s: Failed to send firmware data (%d)", + hdev->name, err); + goto done; + } + + fw_ptr += frag_len; + frag_len = 0; + } + + set_bit(STATE_FIRMWARE_LOADED, &intel->flags); + + BT_INFO("%s: Waiting for firmware download to complete", hdev->name); + + /* Before switching the device into operational mode and with that + * booting the loaded firmware, wait for the bootloader notification + * that all fragments have been successfully received. + * + * When the event processing receives the notification, then the + * STATE_DOWNLOADING flag will be cleared. + * + * The firmware loading should not take longer than 5 seconds + * and thus just timeout if that happens and fail the setup + * of this device. + */ + err = wait_on_bit_timeout(&intel->flags, STATE_DOWNLOADING, + TASK_INTERRUPTIBLE, + msecs_to_jiffies(5000)); + if (err == 1) { + BT_ERR("%s: Firmware loading interrupted", hdev->name); + err = -EINTR; + goto done; + } + + if (err) { + BT_ERR("%s: Firmware loading timeout", hdev->name); + err = -ETIMEDOUT; + goto done; + } + + if (test_bit(STATE_FIRMWARE_FAILED, &intel->flags)) { + BT_ERR("%s: Firmware loading failed", hdev->name); + err = -ENOEXEC; + goto done; + } + + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long) ktime_to_ns(delta) >> 10; + + BT_INFO("%s: Firmware loaded in %llu usecs", hdev->name, duration); + +done: + release_firmware(fw); + + if (err < 0) + return err; + + calltime = ktime_get(); + + set_bit(STATE_BOOTING, &intel->flags); + + skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + kfree_skb(skb); + + /* The bootloader will not indicate when the device is ready. This + * is done by the operational firmware sending bootup notification. + * + * Booting into operational firmware should not take longer than + * 1 second. However if that happens, then just fail the setup + * since something went wrong. + */ + BT_INFO("%s: Waiting for device to boot", hdev->name); + + err = wait_on_bit_timeout(&intel->flags, STATE_BOOTING, + TASK_INTERRUPTIBLE, + msecs_to_jiffies(1000)); + + if (err == 1) { + BT_ERR("%s: Device boot interrupted", hdev->name); + return -EINTR; + } + + if (err) { + BT_ERR("%s: Device boot timeout", hdev->name); + return -ETIMEDOUT; + } + + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long) ktime_to_ns(delta) >> 10; + + BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration); + + clear_bit(STATE_BOOTLOADER, &intel->flags); + + return 0; +} + +static int intel_recv_event(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct hci_uart *hu = hci_get_drvdata(hdev); + struct intel_data *intel = hu->priv; + struct hci_event_hdr *hdr; + + if (!test_bit(STATE_BOOTLOADER, &intel->flags)) + goto recv; + + hdr = (void *)skb->data; + + /* When the firmware loading completes the device sends + * out a vendor specific event indicating the result of + * the firmware loading. + */ + if (skb->len == 7 && hdr->evt == 0xff && hdr->plen == 0x05 && + skb->data[2] == 0x06) { + if (skb->data[3] != 0x00) + set_bit(STATE_FIRMWARE_FAILED, &intel->flags); + + if (test_and_clear_bit(STATE_DOWNLOADING, &intel->flags) && + test_bit(STATE_FIRMWARE_LOADED, &intel->flags)) { + smp_mb__after_atomic(); + wake_up_bit(&intel->flags, STATE_DOWNLOADING); + } + + /* When switching to the operational firmware the device + * sends a vendor specific event indicating that the bootup + * completed. + */ + } else if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 && + skb->data[2] == 0x02) { + if (test_and_clear_bit(STATE_BOOTING, &intel->flags)) { + smp_mb__after_atomic(); + wake_up_bit(&intel->flags, STATE_BOOTING); + } + } +recv: + return hci_recv_frame(hdev, skb); +} + +static const struct h4_recv_pkt intel_recv_pkts[] = { + { H4_RECV_ACL, .recv = hci_recv_frame }, + { H4_RECV_SCO, .recv = hci_recv_frame }, + { H4_RECV_EVENT, .recv = intel_recv_event }, +}; + +static int intel_recv(struct hci_uart *hu, const void *data, int count) +{ + struct intel_data *intel = hu->priv; + + if (!test_bit(HCI_UART_REGISTERED, &hu->flags)) + return -EUNATCH; + + intel->rx_skb = h4_recv_buf(hu->hdev, intel->rx_skb, data, count, + intel_recv_pkts, + ARRAY_SIZE(intel_recv_pkts)); + if (IS_ERR(intel->rx_skb)) { + int err = PTR_ERR(intel->rx_skb); + BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err); + intel->rx_skb = NULL; + return err; + } + + return count; +} + +static int intel_enqueue(struct hci_uart *hu, struct sk_buff *skb) +{ + struct intel_data *intel = hu->priv; + + BT_DBG("hu %p skb %p", hu, skb); + + skb_queue_tail(&intel->txq, skb); + + return 0; +} + +static struct sk_buff *intel_dequeue(struct hci_uart *hu) +{ + struct intel_data *intel = hu->priv; + struct sk_buff *skb; + + skb = skb_dequeue(&intel->txq); + if (!skb) + return skb; + + if (test_bit(STATE_BOOTLOADER, &intel->flags) && + (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT)) { + struct hci_command_hdr *cmd = (void *)skb->data; + __u16 opcode = le16_to_cpu(cmd->opcode); + + /* When the 0xfc01 command is issued to boot into + * the operational firmware, it will actually not + * send a command complete event. To keep the flow + * control working inject that event here. + */ + if (opcode == 0xfc01) + inject_cmd_complete(hu->hdev, opcode); + } + + /* Prepend skb with frame type */ + memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); + + return skb; +} + +static const struct hci_uart_proto intel_proto = { + .id = HCI_UART_INTEL, + .name = "Intel", + .init_speed = 115200, + .open = intel_open, + .close = intel_close, + .flush = intel_flush, + .setup = intel_setup, + .recv = intel_recv, + .enqueue = intel_enqueue, + .dequeue = intel_dequeue, +}; + +int __init intel_init(void) +{ + return hci_uart_register_proto(&intel_proto); +} + +int __exit intel_deinit(void) +{ + return hci_uart_unregister_proto(&intel_proto); +} diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 177dd69fdd95..051f8213697d 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -804,6 +804,9 @@ static int __init hci_uart_init(void) #ifdef CONFIG_BT_HCIUART_3WIRE h5_init(); #endif +#ifdef CONFIG_BT_HCIUART_INTEL + intel_init(); +#endif #ifdef CONFIG_BT_HCIUART_BCM bcm_init(); #endif @@ -830,6 +833,9 @@ static void __exit hci_uart_exit(void) #ifdef CONFIG_BT_HCIUART_3WIRE h5_deinit(); #endif +#ifdef CONFIG_BT_HCIUART_INTEL + intel_deinit(); +#endif #ifdef CONFIG_BT_HCIUART_BCM bcm_deinit(); #endif diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h index ce9c670956f5..496587a73a9d 100644 --- a/drivers/bluetooth/hci_uart.h +++ b/drivers/bluetooth/hci_uart.h @@ -167,6 +167,11 @@ int h5_init(void); int h5_deinit(void); #endif +#ifdef CONFIG_BT_HCIUART_INTEL +int intel_init(void); +int intel_deinit(void); +#endif + #ifdef CONFIG_BT_HCIUART_BCM int bcm_init(void); int bcm_deinit(void);