From: Jes Sorensen Date: Thu, 14 Apr 2016 20:37:17 +0000 (-0400) Subject: rtl8xxxu: Fix 8188RU support X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=cabb550e2b97b8ea42124a93d4665ca052f3e3ff;p=linux-beck.git rtl8xxxu: Fix 8188RU support The 8188RU does not like PAPE to be enabled, while all the other gen1 parts seem to require it. This makes the RTL8188RU able to associate for me. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index 422e7fa6756d..cf7832bfdde8 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -3145,6 +3145,7 @@ static int rtl8192cu_parse_efuse(struct rtl8xxxu_priv *priv) sprintf(priv->chip_name, "8188RU"); priv->rtl_chip = RTL8188R; priv->hi_pa = 1; + priv->no_pape = 1; priv->power_base = &rtl8188r_power_base; } @@ -5555,9 +5556,12 @@ static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000); - val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL); - val32 |= (FPGA0_RF_PAPE | (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT)); - rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32); + if (!priv->no_pape) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL); + val32 |= (FPGA0_RF_PAPE | + (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT)); + rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32); + } val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE); val32 &= ~BIT(10); @@ -7804,11 +7808,14 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, 0x00000003); val32 = FPGA0_RF_TRSW | FPGA0_RF_TRSWB | FPGA0_RF_ANTSW | - FPGA0_RF_ANTSWB | FPGA0_RF_PAPE | - ((FPGA0_RF_ANTSW | FPGA0_RF_ANTSWB | FPGA0_RF_PAPE) << - FPGA0_RF_BD_CTRL_SHIFT); - + FPGA0_RF_ANTSWB | + ((FPGA0_RF_ANTSW | FPGA0_RF_ANTSWB) << FPGA0_RF_BD_CTRL_SHIFT); + if (!priv->no_pape) { + val32 |= (FPGA0_RF_PAPE | + (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT)); + } rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32); + /* 0x860[6:5]= 00 - why? - this sets antenna B */ if (priv->rtl_chip != RTL8192E) rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, 0x66f60210); diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index ebd1a6e7b813..3e2643c79b56 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1287,6 +1287,7 @@ struct rtl8xxxu_priv { u32 bb_recovery_backup[RTL8XXXU_BB_REGS]; enum rtl8xxxu_rtl_chip rtl_chip; u8 pi_enabled:1; + u8 no_pape:1; u8 int_buf[USB_INTR_CONTENT_LENGTH]; };