From: Soeren Moch Date: Tue, 5 Apr 2016 14:55:04 +0000 (+0200) Subject: ARM: dts: imx6q-tbs2910: fix fec reset polarity X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=cc1fb3e1f291c1fc1784619fbb84efab1d677e6c;p=linux-beck.git ARM: dts: imx6q-tbs2910: fix fec reset polarity According to Documentation/devicetree/bindings/net/fsl-fec.txt the polarity of "phy-reset-gpios" is assumed to be active-low unless a separate property "phy-reset-active-high" is available. So replace the inconsistent polarity description to make the correct active-low reset behavior more obvious. Signed-off-by: Soeren Moch Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 0da81bc2c68a..2401c6b54361 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -141,7 +141,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; status = "okay"; };