From: Ravinandan Arakali Date: Tue, 4 Oct 2005 10:41:24 +0000 (-0400) Subject: [PATCH] S2io: MSI/MSI-X support (runtime configurable) X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=cc6e7c44f4b8ab13acf5521cd4b312848122179f;p=linux-beck.git [PATCH] S2io: MSI/MSI-X support (runtime configurable) This patch adds support for MSI/MSI-X feature to the driver. It is a runtime parameter(for now, loadable parameter). Default is INTA. Patch has been tested on IA64 platform with Xframe II adapter, both of which support MSI-X feature. An improvement of about 7% in throughput(both Tx and Rx) was observed and a reduction by 7% in CPU utilization during Tx test. Signed-off-by: Ravinandan Arakali Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index dd451e099a4c..4b9f1828845e 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -67,7 +67,7 @@ /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; -static char s2io_driver_version[] = "Version 2.0.8.1"; +static char s2io_driver_version[] = "Version 2.0.9.1"; static inline int RXD_IS_UP2DT(RxD_t *rxdp) { @@ -307,6 +307,8 @@ static unsigned int indicate_max_pkts; #endif /* Frequency of Rx desc syncs expressed as power of 2 */ static unsigned int rxsync_frequency = 3; +/* Interrupt type. Values can be 0(INTA), 1(MSI), 2(MSI_X) */ +static unsigned int intr_type = 0; /* * S2IO device table. @@ -1396,8 +1398,13 @@ static int init_nic(struct s2io_nic *nic) writeq(val64, &bar0->rti_data1_mem); val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) | - RTI_DATA2_MEM_RX_UFC_B(0x2) | - RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80); + RTI_DATA2_MEM_RX_UFC_B(0x2) ; + if (nic->intr_type == MSI_X) + val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \ + RTI_DATA2_MEM_RX_UFC_D(0x40)); + else + val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) | \ + RTI_DATA2_MEM_RX_UFC_D(0x80)); writeq(val64, &bar0->rti_data2_mem); for (i = 0; i < config->rx_ring_num; i++) { @@ -1507,17 +1514,15 @@ static int init_nic(struct s2io_nic *nic) #define LINK_UP_DOWN_INTERRUPT 1 #define MAC_RMAC_ERR_TIMER 2 -#if defined(CONFIG_MSI_MODE) || defined(CONFIG_MSIX_MODE) -#define s2io_link_fault_indication(x) MAC_RMAC_ERR_TIMER -#else int s2io_link_fault_indication(nic_t *nic) { + if (nic->intr_type != INTA) + return MAC_RMAC_ERR_TIMER; if (nic->device_type == XFRAME_II_DEVICE) return LINK_UP_DOWN_INTERRUPT; else return MAC_RMAC_ERR_TIMER; } -#endif /** * en_dis_able_nic_intrs - Enable or Disable the interrupts @@ -1941,11 +1946,14 @@ static int start_nic(struct s2io_nic *nic) } /* Enable select interrupts */ - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; - interruptible |= TX_PIC_INTR | RX_PIC_INTR; - interruptible |= TX_MAC_INTR | RX_MAC_INTR; - - en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS); + if (nic->intr_type != INTA) + en_dis_able_nic_intrs(nic, ENA_ALL_INTRS, DISABLE_INTRS); + else { + interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; + interruptible |= TX_PIC_INTR | RX_PIC_INTR; + interruptible |= TX_MAC_INTR | RX_MAC_INTR; + en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS); + } /* * With some switches, link might be already up at this point. @@ -2633,11 +2641,11 @@ static void tx_intr_handler(fifo_info_t *fifo_data) err = txdlp->Control_1 & TXD_T_CODE; if ((err >> 48) == 0xA) { DBG_PRINT(TX_DBG, "TxD returned due \ - to loss of link\n"); +to loss of link\n"); } else { DBG_PRINT(ERR_DBG, "***TxD error \ - %llx\n", err); +%llx\n", err); } } @@ -2854,6 +2862,9 @@ void s2io_reset(nic_t * sp) /* Set swapper to enable I/O register access */ s2io_set_swapper(sp); + /* Restore the MSIX table entries from local variables */ + restore_xmsi_data(sp); + /* Clear certain PCI/PCI-X fields after reset */ if (sp->device_type == XFRAME_II_DEVICE) { /* Clear parity err detect bit */ @@ -2983,8 +2994,9 @@ int s2io_set_swapper(nic_t * sp) SWAPPER_CTRL_RXD_W_FE | SWAPPER_CTRL_RXF_W_FE | SWAPPER_CTRL_XMSI_FE | - SWAPPER_CTRL_XMSI_SE | SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE); + if (nic->intr_type == INTA) + val64 |= SWAPPER_CTRL_XMSI_SE; writeq(val64, &bar0->swapper_ctrl); #else /* @@ -3005,8 +3017,9 @@ int s2io_set_swapper(nic_t * sp) SWAPPER_CTRL_RXD_W_SE | SWAPPER_CTRL_RXF_W_FE | SWAPPER_CTRL_XMSI_FE | - SWAPPER_CTRL_XMSI_SE | SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE); + if (sp->intr_type == INTA) + val64 |= SWAPPER_CTRL_XMSI_SE; writeq(val64, &bar0->swapper_ctrl); #endif val64 = readq(&bar0->swapper_ctrl); @@ -3028,6 +3041,201 @@ int s2io_set_swapper(nic_t * sp) return SUCCESS; } +int wait_for_msix_trans(nic_t *nic, int i) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u64 val64; + int ret = 0, cnt = 0; + + do { + val64 = readq(&bar0->xmsi_access); + if (!(val64 & BIT(15))) + break; + mdelay(1); + cnt++; + } while(cnt < 5); + if (cnt == 5) { + DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i); + ret = 1; + } + + return ret; +} + +void restore_xmsi_data(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u64 val64; + int i; + + for (i=0; i< MAX_REQUESTED_MSI_X; i++) { + writeq(nic->msix_info[i].addr, &bar0->xmsi_address); + writeq(nic->msix_info[i].data, &bar0->xmsi_data); + val64 = (BIT(7) | BIT(15) | vBIT(i, 26, 6)); + writeq(val64, &bar0->xmsi_access); + if (wait_for_msix_trans(nic, i)) { + DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__); + continue; + } + } +} + +void store_xmsi_data(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u64 val64, addr, data; + int i; + + /* Store and display */ + for (i=0; i< MAX_REQUESTED_MSI_X; i++) { + val64 = (BIT(15) | vBIT(i, 26, 6)); + writeq(val64, &bar0->xmsi_access); + if (wait_for_msix_trans(nic, i)) { + DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__); + continue; + } + addr = readq(&bar0->xmsi_address); + data = readq(&bar0->xmsi_data); + if (addr && data) { + nic->msix_info[i].addr = addr; + nic->msix_info[i].data = data; + } + } +} + +int s2io_enable_msi(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u16 msi_ctrl, msg_val; + struct config_param *config = &nic->config; + struct net_device *dev = nic->dev; + u64 val64, tx_mat, rx_mat; + int i, err; + + val64 = readq(&bar0->pic_control); + val64 &= ~BIT(1); + writeq(val64, &bar0->pic_control); + + err = pci_enable_msi(nic->pdev); + if (err) { + DBG_PRINT(ERR_DBG, "%s: enabling MSI failed\n", + nic->dev->name); + return err; + } + + /* + * Enable MSI and use MSI-1 in stead of the standard MSI-0 + * for interrupt handling. + */ + pci_read_config_word(nic->pdev, 0x4c, &msg_val); + msg_val ^= 0x1; + pci_write_config_word(nic->pdev, 0x4c, msg_val); + pci_read_config_word(nic->pdev, 0x4c, &msg_val); + + pci_read_config_word(nic->pdev, 0x42, &msi_ctrl); + msi_ctrl |= 0x10; + pci_write_config_word(nic->pdev, 0x42, msi_ctrl); + + /* program MSI-1 into all usable Tx_Mat and Rx_Mat fields */ + tx_mat = readq(&bar0->tx_mat0_n[0]); + for (i=0; itx_fifo_num; i++) { + tx_mat |= TX_MAT_SET(i, 1); + } + writeq(tx_mat, &bar0->tx_mat0_n[0]); + + rx_mat = readq(&bar0->rx_mat); + for (i=0; irx_ring_num; i++) { + rx_mat |= RX_MAT_SET(i, 1); + } + writeq(rx_mat, &bar0->rx_mat); + + dev->irq = nic->pdev->irq; + return 0; +} + +int s2io_enable_msi_x(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u64 tx_mat, rx_mat; + u16 msi_control; /* Temp variable */ + int ret, i, j, msix_indx = 1; + + nic->entries = kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct msix_entry), + GFP_KERNEL); + if (nic->entries == NULL) { + DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__); + return -ENOMEM; + } + memset(nic->entries, 0, MAX_REQUESTED_MSI_X * sizeof(struct msix_entry)); + + nic->s2io_entries = + kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry), + GFP_KERNEL); + if (nic->s2io_entries == NULL) { + DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__); + kfree(nic->entries); + return -ENOMEM; + } + memset(nic->s2io_entries, 0, + MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry)); + + for (i=0; i< MAX_REQUESTED_MSI_X; i++) { + nic->entries[i].entry = i; + nic->s2io_entries[i].entry = i; + nic->s2io_entries[i].arg = NULL; + nic->s2io_entries[i].in_use = 0; + } + + tx_mat = readq(&bar0->tx_mat0_n[0]); + for (i=0; iconfig.tx_fifo_num; i++, msix_indx++) { + tx_mat |= TX_MAT_SET(i, msix_indx); + nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i]; + nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE; + nic->s2io_entries[msix_indx].in_use = MSIX_FLG; + } + writeq(tx_mat, &bar0->tx_mat0_n[0]); + + if (!nic->config.bimodal) { + rx_mat = readq(&bar0->rx_mat); + for (j=0; jconfig.rx_ring_num; j++, msix_indx++) { + rx_mat |= RX_MAT_SET(j, msix_indx); + nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j]; + nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE; + nic->s2io_entries[msix_indx].in_use = MSIX_FLG; + } + writeq(rx_mat, &bar0->rx_mat); + } else { + tx_mat = readq(&bar0->tx_mat0_n[7]); + for (j=0; jconfig.rx_ring_num; j++, msix_indx++) { + tx_mat |= TX_MAT_SET(i, msix_indx); + nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j]; + nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE; + nic->s2io_entries[msix_indx].in_use = MSIX_FLG; + } + writeq(tx_mat, &bar0->tx_mat0_n[7]); + } + + ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X); + if (ret) { + DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name); + kfree(nic->entries); + kfree(nic->s2io_entries); + nic->entries = NULL; + nic->s2io_entries = NULL; + return -ENOMEM; + } + + /* + * To enable MSI-X, MSI also needs to be enabled, due to a bug + * in the herc NIC. (Temp change, needs to be removed later) + */ + pci_read_config_word(nic->pdev, 0x42, &msi_control); + msi_control |= 0x1; /* Enable MSI */ + pci_write_config_word(nic->pdev, 0x42, msi_control); + + return 0; +} + /* ********************************************************* * * Functions defined below concern the OS part of the driver * * ********************************************************* */ @@ -3048,6 +3256,8 @@ int s2io_open(struct net_device *dev) { nic_t *sp = dev->priv; int err = 0; + int i; + u16 msi_control; /* Temp variable */ /* * Make sure you have link off by default every time @@ -3064,13 +3274,55 @@ int s2io_open(struct net_device *dev) goto hw_init_failed; } + /* Store the values of the MSIX table in the nic_t structure */ + store_xmsi_data(sp); + /* After proper initialization of H/W, register ISR */ - err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ, - sp->name, dev); - if (err) { - DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", - dev->name); - goto isr_registration_failed; + if (sp->intr_type == MSI) { + err = request_irq((int) sp->pdev->irq, s2io_msi_handle, + SA_SHIRQ, sp->name, dev); + if (err) { + DBG_PRINT(ERR_DBG, "%s: MSI registration \ +failed\n", dev->name); + goto isr_registration_failed; + } + } + if (sp->intr_type == MSI_X) { + for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) { + if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) { + sprintf(sp->desc1, "%s:MSI-X-%d-TX", + dev->name, i); + err = request_irq(sp->entries[i].vector, + s2io_msix_fifo_handle, 0, sp->desc1, + sp->s2io_entries[i].arg); + DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1, + sp->msix_info[i].addr); + } else { + sprintf(sp->desc2, "%s:MSI-X-%d-RX", + dev->name, i); + err = request_irq(sp->entries[i].vector, + s2io_msix_ring_handle, 0, sp->desc2, + sp->s2io_entries[i].arg); + DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2, + sp->msix_info[i].addr); + } + if (err) { + DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \ +failed\n", dev->name, i); + DBG_PRINT(ERR_DBG, "Returned: %d\n", err); + goto isr_registration_failed; + } + sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS; + } + } + if (sp->intr_type == INTA) { + err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ, + sp->name, dev); + if (err) { + DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", + dev->name); + goto isr_registration_failed; + } } if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) { @@ -3083,11 +3335,37 @@ int s2io_open(struct net_device *dev) return 0; setting_mac_address_failed: - free_irq(sp->pdev->irq, dev); + if (sp->intr_type != MSI_X) + free_irq(sp->pdev->irq, dev); isr_registration_failed: del_timer_sync(&sp->alarm_timer); + if (sp->intr_type == MSI_X) { + if (sp->device_type == XFRAME_II_DEVICE) { + for (i=1; (sp->s2io_entries[i].in_use == + MSIX_REGISTERED_SUCCESS); i++) { + int vector = sp->entries[i].vector; + void *arg = sp->s2io_entries[i].arg; + + free_irq(vector, arg); + } + pci_disable_msix(sp->pdev); + + /* Temp */ + pci_read_config_word(sp->pdev, 0x42, &msi_control); + msi_control &= 0xFFFE; /* Disable MSI */ + pci_write_config_word(sp->pdev, 0x42, msi_control); + } + } + else if (sp->intr_type == MSI) + pci_disable_msi(sp->pdev); s2io_reset(sp); hw_init_failed: + if (sp->intr_type == MSI_X) { + if (sp->entries) + kfree(sp->entries); + if (sp->s2io_entries) + kfree(sp->s2io_entries); + } return err; } @@ -3107,12 +3385,35 @@ hw_init_failed: int s2io_close(struct net_device *dev) { nic_t *sp = dev->priv; + int i; + u16 msi_control; + flush_scheduled_work(); netif_stop_queue(dev); /* Reset card, kill tasklet and free Tx and Rx buffers. */ s2io_card_down(sp); - free_irq(sp->pdev->irq, dev); + if (sp->intr_type == MSI_X) { + if (sp->device_type == XFRAME_II_DEVICE) { + for (i=1; (sp->s2io_entries[i].in_use == + MSIX_REGISTERED_SUCCESS); i++) { + int vector = sp->entries[i].vector; + void *arg = sp->s2io_entries[i].arg; + + free_irq(vector, arg); + } + pci_read_config_word(sp->pdev, 0x42, &msi_control); + msi_control &= 0xFFFE; /* Disable MSI */ + pci_write_config_word(sp->pdev, 0x42, msi_control); + + pci_disable_msix(sp->pdev); + } + } + else { + free_irq(sp->pdev->irq, dev); + if (sp->intr_type == MSI) + pci_disable_msi(sp->pdev); + } sp->device_close_flag = TRUE; /* Device is shut down. */ return 0; } @@ -3278,6 +3579,104 @@ s2io_alarm_handle(unsigned long data) mod_timer(&sp->alarm_timer, jiffies + HZ / 2); } +static irqreturn_t +s2io_msi_handle(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *) dev_id; + nic_t *sp = dev->priv; + int i; + int ret; + mac_info_t *mac_control; + struct config_param *config; + + atomic_inc(&sp->isr_cnt); + mac_control = &sp->mac_control; + config = &sp->config; + DBG_PRINT(INTR_DBG, "%s: MSI handler\n", __FUNCTION__); + + /* If Intr is because of Rx Traffic */ + for (i = 0; i < config->rx_ring_num; i++) + rx_intr_handler(&mac_control->rings[i]); + + /* If Intr is because of Tx Traffic */ + for (i = 0; i < config->tx_fifo_num; i++) + tx_intr_handler(&mac_control->fifos[i]); + + /* + * If the Rx buffer count is below the panic threshold then + * reallocate the buffers from the interrupt handler itself, + * else schedule a tasklet to reallocate the buffers. + */ + for (i = 0; i < config->rx_ring_num; i++) { + int rxb_size = atomic_read(&sp->rx_bufs_left[i]); + int level = rx_buffer_level(sp, rxb_size, i); + + if ((level == PANIC) && (!TASKLET_IN_USE)) { + DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", dev->name); + DBG_PRINT(INTR_DBG, "PANIC levels\n"); + if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) { + DBG_PRINT(ERR_DBG, "%s:Out of memory", + dev->name); + DBG_PRINT(ERR_DBG, " in ISR!!\n"); + clear_bit(0, (&sp->tasklet_status)); + atomic_dec(&sp->isr_cnt); + return IRQ_HANDLED; + } + clear_bit(0, (&sp->tasklet_status)); + } else if (level == LOW) { + tasklet_schedule(&sp->task); + } + } + + atomic_dec(&sp->isr_cnt); + return IRQ_HANDLED; +} + +static irqreturn_t +s2io_msix_ring_handle(int irq, void *dev_id, struct pt_regs *regs) +{ + ring_info_t *ring = (ring_info_t *)dev_id; + nic_t *sp = ring->nic; + int rxb_size, level, rng_n; + + atomic_inc(&sp->isr_cnt); + rx_intr_handler(ring); + + rng_n = ring->ring_no; + rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]); + level = rx_buffer_level(sp, rxb_size, rng_n); + + if ((level == PANIC) && (!TASKLET_IN_USE)) { + int ret; + DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__); + DBG_PRINT(INTR_DBG, "PANIC levels\n"); + if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) { + DBG_PRINT(ERR_DBG, "Out of memory in %s", + __FUNCTION__); + clear_bit(0, (&sp->tasklet_status)); + return IRQ_HANDLED; + } + clear_bit(0, (&sp->tasklet_status)); + } else if (level == LOW) { + tasklet_schedule(&sp->task); + } + atomic_dec(&sp->isr_cnt); + + return IRQ_HANDLED; +} + +static irqreturn_t +s2io_msix_fifo_handle(int irq, void *dev_id, struct pt_regs *regs) +{ + fifo_info_t *fifo = (fifo_info_t *)dev_id; + nic_t *sp = fifo->nic; + + atomic_inc(&sp->isr_cnt); + tx_intr_handler(fifo); + atomic_dec(&sp->isr_cnt); + return IRQ_HANDLED; +} + static void s2io_txpic_intr_handle(nic_t *sp) { XENA_dev_config_t __iomem *bar0 = sp->bar0; @@ -4932,7 +5331,7 @@ static void s2io_card_down(nic_t * sp) static int s2io_card_up(nic_t * sp) { - int i, ret; + int i, ret = 0; mac_info_t *mac_control; struct config_param *config; struct net_device *dev = (struct net_device *) sp->dev; @@ -4944,6 +5343,15 @@ static int s2io_card_up(nic_t * sp) return -ENODEV; } + if (sp->intr_type == MSI) + ret = s2io_enable_msi(sp); + else if (sp->intr_type == MSI_X) + ret = s2io_enable_msi_x(sp); + if (ret) { + DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name); + sp->intr_type = INTA; + } + /* * Initializing the Rx buffers. For now we are considering only 1 * Rx ring and initializing buffers into 30 Rx blocks @@ -5245,6 +5653,7 @@ module_param(bimodal, bool, 0); module_param(indicate_max_pkts, int, 0); #endif module_param(rxsync_frequency, int, 0); +module_param(intr_type, int, 0); /** * s2io_init_nic - Initialization of the adapter . @@ -5274,9 +5683,16 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) mac_info_t *mac_control; struct config_param *config; int mode; + u8 dev_intr_type = intr_type; #ifdef CONFIG_S2IO_NAPI - DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n"); + if (dev_intr_type != INTA) { + DBG_PRINT(ERR_DBG, "NAPI cannot be enabled when MSI/MSI-X \ +is enabled. Defaulting to INTA\n"); + dev_intr_type = INTA; + } + else + DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n"); #endif if ((ret = pci_enable_device(pdev))) { @@ -5303,10 +5719,35 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) return -ENOMEM; } - if (pci_request_regions(pdev, s2io_driver_name)) { - DBG_PRINT(ERR_DBG, "Request Regions failed\n"), - pci_disable_device(pdev); - return -ENODEV; + if ((dev_intr_type == MSI_X) && + ((pdev->device != PCI_DEVICE_ID_HERC_WIN) && + (pdev->device != PCI_DEVICE_ID_HERC_UNI))) { + DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. \ +Defaulting to INTA\n"); + dev_intr_type = INTA; + } + if (dev_intr_type != MSI_X) { + if (pci_request_regions(pdev, s2io_driver_name)) { + DBG_PRINT(ERR_DBG, "Request Regions failed\n"), + pci_disable_device(pdev); + return -ENODEV; + } + } + else { + if (!(request_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0), s2io_driver_name))) { + DBG_PRINT(ERR_DBG, "bar0 Request Regions failed\n"); + pci_disable_device(pdev); + return -ENODEV; + } + if (!(request_mem_region(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2), s2io_driver_name))) { + DBG_PRINT(ERR_DBG, "bar1 Request Regions failed\n"); + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + pci_disable_device(pdev); + return -ENODEV; + } } dev = alloc_etherdev(sizeof(nic_t)); @@ -5329,6 +5770,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) sp->pdev = pdev; sp->high_dma_flag = dma_flag; sp->device_enabled_once = FALSE; + sp->intr_type = dev_intr_type; if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) || (pdev->device == PCI_DEVICE_ID_HERC_UNI)) @@ -5336,6 +5778,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) else sp->device_type = XFRAME_I_DEVICE; + /* Initialize some PCI/PCI-X fields of the NIC. */ s2io_init_pci(sp); @@ -5577,6 +6020,17 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) #ifdef CONFIG_2BUFF_MODE DBG_PRINT(ERR_DBG, ", Buffer mode %d",2); #endif + switch(sp->intr_type) { + case INTA: + DBG_PRINT(ERR_DBG, ", Intr type INTA"); + break; + case MSI: + DBG_PRINT(ERR_DBG, ", Intr type MSI"); + break; + case MSI_X: + DBG_PRINT(ERR_DBG, ", Intr type MSI-X"); + break; + } DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n"); DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n", @@ -5601,6 +6055,17 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) #ifdef CONFIG_2BUFF_MODE DBG_PRINT(ERR_DBG, ", Buffer mode %d",2); #endif + switch(sp->intr_type) { + case INTA: + DBG_PRINT(ERR_DBG, ", Intr type INTA"); + break; + case MSI: + DBG_PRINT(ERR_DBG, ", Intr type MSI"); + break; + case MSI_X: + DBG_PRINT(ERR_DBG, ", Intr type MSI-X"); + break; + } DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n"); DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n", sp->def_mac_addr[0].mac_addr[0], @@ -5644,7 +6109,14 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) mem_alloc_failed: free_shared_mem(sp); pci_disable_device(pdev); - pci_release_regions(pdev); + if (dev_intr_type != MSI_X) + pci_release_regions(pdev); + else { + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + release_mem_region(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2)); + } pci_set_drvdata(pdev, NULL); free_netdev(dev); @@ -5678,7 +6150,14 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev) iounmap(sp->bar0); iounmap(sp->bar1); pci_disable_device(pdev); - pci_release_regions(pdev); + if (sp->intr_type != MSI_X) + pci_release_regions(pdev); + else { + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + release_mem_region(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2)); + } pci_set_drvdata(pdev, NULL); free_netdev(dev); } diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 89151cb52181..1cc24b56760e 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -652,6 +652,30 @@ typedef struct { #define SMALL_BLK_CNT 30 #define LARGE_BLK_CNT 100 +/* + * Structure to keep track of the MSI-X vectors and the corresponding + * argument registered against each vector + */ +#define MAX_REQUESTED_MSI_X 17 +struct s2io_msix_entry +{ + u16 vector; + u16 entry; + void *arg; + + u8 type; +#define MSIX_FIFO_TYPE 1 +#define MSIX_RING_TYPE 2 + + u8 in_use; +#define MSIX_REGISTERED_SUCCESS 0xAA +}; + +struct msix_info_st { + u64 addr; + u64 data; +}; + /* Structure representing one instance of the NIC */ struct s2io_nic { #ifdef CONFIG_S2IO_NAPI @@ -719,13 +743,8 @@ struct s2io_nic { * a schedule task that will set the correct Link state once the * NIC's PHY has stabilized after a state change. */ -#ifdef INIT_TQUEUE - struct tq_struct rst_timer_task; - struct tq_struct set_link_task; -#else struct work_struct rst_timer_task; struct work_struct set_link_task; -#endif /* Flag that can be used to turn on or turn off the Rx checksum * offload feature. @@ -748,10 +767,23 @@ struct s2io_nic { atomic_t card_state; volatile unsigned long link_state; struct vlan_group *vlgrp; +#define MSIX_FLG 0xA5 + struct msix_entry *entries; + struct s2io_msix_entry *s2io_entries; + char desc1[35]; + char desc2[35]; + + struct msix_info_st msix_info[0x3f]; + #define XFRAME_I_DEVICE 1 #define XFRAME_II_DEVICE 2 u8 device_type; +#define INTA 0 +#define MSI 1 +#define MSI_X 2 + u8 intr_type; + spinlock_t rx_lock; atomic_t isr_cnt; }; @@ -886,6 +918,13 @@ static int s2io_poll(struct net_device *dev, int *budget); static void s2io_init_pci(nic_t * sp); int s2io_set_mac_addr(struct net_device *dev, u8 * addr); static void s2io_alarm_handle(unsigned long data); +static int s2io_enable_msi(nic_t *nic); +static irqreturn_t s2io_msi_handle(int irq, void *dev_id, struct pt_regs *regs); +static irqreturn_t +s2io_msix_ring_handle(int irq, void *dev_id, struct pt_regs *regs); +static irqreturn_t +s2io_msix_fifo_handle(int irq, void *dev_id, struct pt_regs *regs); +int s2io_enable_msi_x(nic_t *nic); static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs); static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag); static struct ethtool_ops netdev_ethtool_ops; @@ -894,4 +933,5 @@ int s2io_set_swapper(nic_t * sp); static void s2io_card_down(nic_t *nic); static int s2io_card_up(nic_t *nic); int get_xena_rev_id(struct pci_dev *pdev); +void restore_xmsi_data(nic_t *nic); #endif /* _S2IO_H */