From: Greg Rose Date: Fri, 6 Mar 2015 01:41:07 +0000 (+0000) Subject: i40e: Strip configfs code X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=cd77f5e1fa17de2479d838a36fed0bc98b0a42c2;p=linux-beck.git i40e: Strip configfs code The use of configfs is not allowed in network drivers. Strip the code that uses it. Signed-off-by: Greg Rose Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index 7216a5370a1f..f4ff465584a0 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -303,15 +303,6 @@ config I40E_FCOE If unsure, say N. -config I40E_CONFIGFS_FS - bool "Config File System Support (configfs)" - default n - depends on I40E && CONFIGFS_FS && !(I40E=y && CONFIGFS_FS=m) - ---help--- - Provides support for the configfs file system for additional - driver configuration. Say Y here if you want to use the - configuration file system in the driver. - config I40EVF tristate "Intel(R) XL710 X710 Virtual Function Ethernet support" depends on PCI_MSI diff --git a/drivers/net/ethernet/intel/i40e/Makefile b/drivers/net/ethernet/intel/i40e/Makefile index 023e452aff8c..b4729ba57c9c 100644 --- a/drivers/net/ethernet/intel/i40e/Makefile +++ b/drivers/net/ethernet/intel/i40e/Makefile @@ -37,7 +37,6 @@ i40e-objs := i40e_main.o \ i40e_hmc.o \ i40e_lan_hmc.o \ i40e_nvm.o \ - i40e_configfs.o \ i40e_debugfs.o \ i40e_diag.o \ i40e_txrx.o \ diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h index f01cdbf015c7..7ce8e600c13c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e.h +++ b/drivers/net/ethernet/intel/i40e/i40e.h @@ -749,10 +749,6 @@ int i40e_ptp_get_ts_config(struct i40e_pf *pf, struct ifreq *ifr); void i40e_ptp_init(struct i40e_pf *pf); void i40e_ptp_stop(struct i40e_pf *pf); int i40e_is_vsi_uplink_mode_veb(struct i40e_vsi *vsi); -#if IS_ENABLED(CONFIG_I40E_CONFIGFS_FS) -int i40e_configfs_init(void); -void i40e_configfs_exit(void); -#endif /* CONFIG_I40E_CONFIGFS_FS */ i40e_status i40e_get_npar_bw_setting(struct i40e_pf *pf); i40e_status i40e_set_npar_bw_setting(struct i40e_pf *pf); i40e_status i40e_commit_npar_bw_setting(struct i40e_pf *pf); diff --git a/drivers/net/ethernet/intel/i40e/i40e_configfs.c b/drivers/net/ethernet/intel/i40e/i40e_configfs.c deleted file mode 100644 index d3cdfc24d5bf..000000000000 --- a/drivers/net/ethernet/intel/i40e/i40e_configfs.c +++ /dev/null @@ -1,354 +0,0 @@ -/******************************************************************************* - * - * Intel Ethernet Controller XL710 Family Linux Driver - * Copyright(c) 2013 - 2015 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program. If not, see . - * - * The full GNU General Public License is included in this distribution in - * the file called "COPYING". - * - * Contact Information: - * e1000-devel Mailing List - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - ******************************************************************************/ - -#include -#include "i40e.h" - -#if IS_ENABLED(CONFIG_I40E_CONFIGFS_FS) - -/** - * configfs structure for i40e - * - * This file adds code for configfs support for the i40e driver. This sets - * up a filesystem under /sys/kernel/config in which configuration changes - * can be made for the driver's netdevs. - * - * The initialization in this code creates the "i40e" entry in the configfs - * system. After that, the user needs to use mkdir to create configurations - * for specific netdev ports; for example "mkdir eth3". This code will verify - * that such a netdev exists and that it is owned by i40e. - * - **/ - -struct i40e_cfgfs_vsi { - struct config_item item; - struct i40e_vsi *vsi; -}; - -static inline struct i40e_cfgfs_vsi *to_i40e_cfgfs_vsi(struct config_item *item) -{ - return item ? container_of(item, struct i40e_cfgfs_vsi, item) : NULL; -} - -static struct configfs_attribute i40e_cfgfs_vsi_attr_min_bw = { - .ca_owner = THIS_MODULE, - .ca_name = "min_bw", - .ca_mode = S_IRUGO | S_IWUSR, -}; - -static struct configfs_attribute i40e_cfgfs_vsi_attr_max_bw = { - .ca_owner = THIS_MODULE, - .ca_name = "max_bw", - .ca_mode = S_IRUGO | S_IWUSR, -}; - -static struct configfs_attribute i40e_cfgfs_vsi_attr_commit = { - .ca_owner = THIS_MODULE, - .ca_name = "commit", - .ca_mode = S_IRUGO | S_IWUSR, -}; - -static struct configfs_attribute i40e_cfgfs_vsi_attr_port_count = { - .ca_owner = THIS_MODULE, - .ca_name = "ports", - .ca_mode = S_IRUGO | S_IWUSR, -}; - -static struct configfs_attribute i40e_cfgfs_vsi_attr_part_count = { - .ca_owner = THIS_MODULE, - .ca_name = "partitions", - .ca_mode = S_IRUGO | S_IWUSR, -}; - -static struct configfs_attribute *i40e_cfgfs_vsi_attrs[] = { - &i40e_cfgfs_vsi_attr_min_bw, - &i40e_cfgfs_vsi_attr_max_bw, - &i40e_cfgfs_vsi_attr_commit, - &i40e_cfgfs_vsi_attr_port_count, - &i40e_cfgfs_vsi_attr_part_count, - NULL, -}; - -/** - * i40e_cfgfs_vsi_attr_show - Show a VSI's NPAR BW partition info - * @item: A pointer back to the configfs item created on driver load - * @attr: A pointer to this item's configuration attribute - * @page: A pointer to the output buffer - **/ -static ssize_t i40e_cfgfs_vsi_attr_show(struct config_item *item, - struct configfs_attribute *attr, - char *page) -{ - struct i40e_cfgfs_vsi *i40e_cfgfs_vsi = to_i40e_cfgfs_vsi(item); - struct i40e_pf *pf = i40e_cfgfs_vsi->vsi->back; - ssize_t count; - - if (i40e_cfgfs_vsi->vsi != pf->vsi[pf->lan_vsi]) - return 0; - - if (strncmp(attr->ca_name, "min_bw", 6) == 0) - count = sprintf(page, "%s %s %d%%\n", - i40e_cfgfs_vsi->vsi->netdev->name, - (pf->npar_min_bw & I40E_ALT_BW_RELATIVE_MASK) ? - "Relative Min BW" : "Absolute Min BW", - pf->npar_min_bw & I40E_ALT_BW_VALUE_MASK); - else if (strncmp(attr->ca_name, "max_bw", 6) == 0) - count = sprintf(page, "%s %s %d%%\n", - i40e_cfgfs_vsi->vsi->netdev->name, - (pf->npar_max_bw & I40E_ALT_BW_RELATIVE_MASK) ? - "Relative Max BW" : "Absolute Max BW", - pf->npar_max_bw & I40E_ALT_BW_VALUE_MASK); - else if (strncmp(attr->ca_name, "ports", 5) == 0) - count = sprintf(page, "%d\n", - pf->hw.num_ports); - else if (strncmp(attr->ca_name, "partitions", 10) == 0) - count = sprintf(page, "%d\n", - pf->hw.num_partitions); - else - return 0; - - return count; -} - -/** - * i40e_cfgfs_vsi_attr_store - Show a VSI's NPAR BW partition info - * @item: A pointer back to the configfs item created on driver load - * @attr: A pointer to this item's configuration attribute - * @page: A pointer to the user input buffer holding the user input values - **/ -static ssize_t i40e_cfgfs_vsi_attr_store(struct config_item *item, - struct configfs_attribute *attr, - const char *page, size_t count) -{ - struct i40e_cfgfs_vsi *i40e_cfgfs_vsi = to_i40e_cfgfs_vsi(item); - struct i40e_pf *pf = i40e_cfgfs_vsi->vsi->back; - char *p = (char *)page; - int rc; - unsigned long tmp; - - if (i40e_cfgfs_vsi->vsi != pf->vsi[pf->lan_vsi]) - return 0; - - if (!p || (*p && (*p == '\n'))) - return -EINVAL; - - rc = kstrtoul(p, 10, &tmp); - if (rc) - return rc; - if (tmp > 100) - return -ERANGE; - - if (strncmp(attr->ca_name, "min_bw", 6) == 0) { - if (tmp > (pf->npar_max_bw & I40E_ALT_BW_VALUE_MASK)) - return -ERANGE; - /* Preserve the valid and relative BW bits - the rest is - * don't care. - */ - pf->npar_min_bw &= (I40E_ALT_BW_RELATIVE_MASK | - I40E_ALT_BW_VALID_MASK); - pf->npar_min_bw |= (tmp & I40E_ALT_BW_VALUE_MASK); - i40e_set_npar_bw_setting(pf); - } else if (strncmp(attr->ca_name, "max_bw", 6) == 0) { - if (tmp < 1 || - tmp < (pf->npar_min_bw & I40E_ALT_BW_VALUE_MASK)) - return -ERANGE; - /* Preserve the valid and relative BW bits - the rest is - * don't care. - */ - pf->npar_max_bw &= (I40E_ALT_BW_RELATIVE_MASK | - I40E_ALT_BW_VALID_MASK); - pf->npar_max_bw |= (tmp & I40E_ALT_BW_VALUE_MASK); - i40e_set_npar_bw_setting(pf); - } else if (strncmp(attr->ca_name, "commit", 6) == 0 && tmp == 1) { - if (i40e_commit_npar_bw_setting(pf)) - return -EIO; - } - - return count; -} - -/** - * i40e_cfgfs_vsi_release - Free up the configuration item memory - * @item: A pointer back to the configfs item created on driver load - **/ -static void i40e_cfgfs_vsi_release(struct config_item *item) -{ - kfree(to_i40e_cfgfs_vsi(item)); -} - -static struct configfs_item_operations i40e_cfgfs_vsi_item_ops = { - .release = i40e_cfgfs_vsi_release, - .show_attribute = i40e_cfgfs_vsi_attr_show, - .store_attribute = i40e_cfgfs_vsi_attr_store, -}; - -static struct config_item_type i40e_cfgfs_vsi_type = { - .ct_item_ops = &i40e_cfgfs_vsi_item_ops, - .ct_attrs = i40e_cfgfs_vsi_attrs, - .ct_owner = THIS_MODULE, -}; - -struct i40e_cfgfs_group { - struct config_group group; -}; - -/** - * to_i40e_cfgfs_group - Get the group pointer from the config item - * @item: A pointer back to the configfs item created on driver load - **/ -static inline struct i40e_cfgfs_group * -to_i40e_cfgfs_group(struct config_item *item) -{ - return item ? container_of(to_config_group(item), - struct i40e_cfgfs_group, group) : NULL; -} - -/** - * i40e_cfgfs_group_make_item - Create the configfs item with group container - * @group: A pointer to our configfs group - * @name: A pointer to the nume of the device we're looking for - **/ -static struct config_item * -i40e_cfgfs_group_make_item(struct config_group *group, const char *name) -{ - struct i40e_cfgfs_vsi *i40e_cfgfs_vsi; - struct net_device *netdev; - struct i40e_netdev_priv *np; - - read_lock(&dev_base_lock); - netdev = first_net_device(&init_net); - while (netdev) { - if (strncmp(netdev->name, name, sizeof(netdev->name)) == 0) - break; - netdev = next_net_device(netdev); - } - read_unlock(&dev_base_lock); - - if (!netdev) - return ERR_PTR(-ENODEV); - - /* is this netdev owned by i40e? */ - if (netdev->netdev_ops->ndo_open != i40e_open) - return ERR_PTR(-EACCES); - - i40e_cfgfs_vsi = kzalloc(sizeof(*i40e_cfgfs_vsi), GFP_KERNEL); - if (!i40e_cfgfs_vsi) - return ERR_PTR(-ENOMEM); - - np = netdev_priv(netdev); - i40e_cfgfs_vsi->vsi = np->vsi; - config_item_init_type_name(&i40e_cfgfs_vsi->item, name, - &i40e_cfgfs_vsi_type); - - return &i40e_cfgfs_vsi->item; -} - -static struct configfs_attribute i40e_cfgfs_group_attr_description = { - .ca_owner = THIS_MODULE, - .ca_name = "description", - .ca_mode = S_IRUGO, -}; - -static struct configfs_attribute *i40e_cfgfs_group_attrs[] = { - &i40e_cfgfs_group_attr_description, - NULL, -}; - -static ssize_t i40e_cfgfs_group_attr_show(struct config_item *item, - struct configfs_attribute *attr, - char *page) -{ - return sprintf(page, -"i40e\n" -"\n" -"This subsystem allows the modification of network port configurations.\n" -"To start, use the name of the network port to be configured in a 'mkdir'\n" -"command, e.g. 'mkdir eth3'.\n"); -} - -static void i40e_cfgfs_group_release(struct config_item *item) -{ - kfree(to_i40e_cfgfs_group(item)); -} - -static struct configfs_item_operations i40e_cfgfs_group_item_ops = { - .release = i40e_cfgfs_group_release, - .show_attribute = i40e_cfgfs_group_attr_show, -}; - -/* Note that, since no extra work is required on ->drop_item(), - * no ->drop_item() is provided. - */ -static struct configfs_group_operations i40e_cfgfs_group_ops = { - .make_item = i40e_cfgfs_group_make_item, -}; - -static struct config_item_type i40e_cfgfs_group_type = { - .ct_item_ops = &i40e_cfgfs_group_item_ops, - .ct_group_ops = &i40e_cfgfs_group_ops, - .ct_attrs = i40e_cfgfs_group_attrs, - .ct_owner = THIS_MODULE, -}; - -static struct configfs_subsystem i40e_cfgfs_group_subsys = { - .su_group = { - .cg_item = { - .ci_namebuf = "i40e", - .ci_type = &i40e_cfgfs_group_type, - }, - }, -}; - -/** - * i40e_configfs_init - Initialize configfs support for our driver - **/ -int i40e_configfs_init(void) -{ - int ret; - struct configfs_subsystem *subsys; - - subsys = &i40e_cfgfs_group_subsys; - - config_group_init(&subsys->su_group); - mutex_init(&subsys->su_mutex); - ret = configfs_register_subsystem(subsys); - if (ret) { - pr_err("Error %d while registering configfs subsystem %s\n", - ret, subsys->su_group.cg_item.ci_namebuf); - return ret; - } - - return 0; -} - -/** - * i40e_configfs_init - Bail out - unregister configfs subsystem and release - **/ -void i40e_configfs_exit(void) -{ - configfs_unregister_subsystem(&i40e_cfgfs_group_subsys); -} -#endif /* IS_ENABLED(CONFIG_I40E_CONFIGFS_FS) */ diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index d689c456a9ac..4bed881e3cb6 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -10287,9 +10287,6 @@ static int __init i40e_init_module(void) i40e_driver_string, i40e_driver_version_str); pr_info("%s: %s\n", i40e_driver_name, i40e_copyright); -#if IS_ENABLED(CONFIG_I40E_CONFIGFS_FS) - i40e_configfs_init(); -#endif /* CONFIG_I40E_CONFIGFS_FS */ i40e_dbg_init(); return pci_register_driver(&i40e_driver); } @@ -10305,8 +10302,5 @@ static void __exit i40e_exit_module(void) { pci_unregister_driver(&i40e_driver); i40e_dbg_exit(); -#if IS_ENABLED(CONFIG_I40E_CONFIGFS_FS) - i40e_configfs_exit(); -#endif /* CONFIG_I40E_CONFIGFS_FS */ } module_exit(i40e_exit_module);